Best t-slot nuts according to redditors
We found 9 Reddit comments discussing the best t-slot nuts. We ranked the 2 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 9 Reddit comments discussing the best t-slot nuts. We ranked the 2 resulting products by number of redditors who mentioned them. Here are the top 20.
I keep some backup clothing. Specifically wool socks, boots and extra gloves and hat. If I get stranded and have to trudge through the snow I wanna be prepared.
Recovery straps arent too expensive either. I think mine was like $30. Get a hitch shackle too if you're gonna do that.
Besides that I keep extra fluids and litter or salt in a box in the back. I got one of these cause I didnt want anything permanent, and just chain it in the bed. Also sand bags for weight - this year I'm planning to build a frame to hold them in place.
Over summer I also built this rail-mount shovel holder, mostly to keep it from bouncing around or getting easily lifted. Its not really secure but its better than just tossing it in there. I used these clamps and these t-slot nuts for the rail. Hardware came from lowes, 3/8"-16, i think they were 1 1/2 inch bolts, washers, and the aluminum bar.
Easy! Bed rail nuts
So I found the bag of "stock" D-bot parts I'd replaced, and tested those specific ones I linked to, and they work fine with the parts.
These: https://www.amazon.com/dp/B019ZXUSY0/ref=biss_dp_t_buying_options
So if you're looking to recommend some specific T-nuts, those work.
Lots of cheap options on Amazon. If you don't want the bar you can get a couple of these t-nuts that fit inside the track and screw the fork mount into that for an out of the way semi permanent options.
Sunlite Fork Mount Bike Block https://www.amazon.com/dp/B000AO7GRG/ref=cm_sw_r_cp_apa_2dOwzbNNVRVQF
1018 Steel T-Slot Nut, Black Oxide Finish, Grade 5, Tapped Through, 3/8"-16 Threads, 5/8" Height, 9/16" Slot Depth, Made in US (Pack of 5) https://www.amazon.com/dp/B009SWGLHW/ref=cm_sw_r_cp_apa_IgOwzbJSKR2CC
Trencher Shovel:
Manufacturer's site for specs: https://www.crkt.com/trencher.html
Amazon link for a better price: https://www.amazon.ca/gp/product/B01M0G10O4/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Mounting Pieces:
Quickfists: https://www.amazon.ca/gp/product/B000CQPANY/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
T-Slot Nuts: https://www.amazon.ca/gp/product/B009SWGLHW/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Screws: https://www.amazon.ca/gp/product/B00IZFS0VI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
You will need a Drill and a 3/8" or 1/2" drill bit. Drill out the stock hole in the bottom of the quickfist to make the hole larger, the screws will then fit through. Put the T-Nut in the bed-rail and slide it down to where you want it. Screw the Quickfist to the T-Nut and you get what you see above! Insert your tool of choice!
I just built an Anet AM8 using 2040 extrusion.
Those angle need M5x10
You can also get a 100 pack of the T nuts for cheap as well
https://www.amazon.com/gp/product/B019ZXUSY0/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1