(Part 2) Top products from r/AverageBattlestations

I absolutely love the mount, it works great for me because I don't need to drill any holes into my wall because I can just attach to my desk. The mount I have is a Mount-It! Articulating Single Arm.

Here's the link to it on Amazon:

http://www.amazon.com/gp/product/B0052ATODM/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

if you talking about for my legs under the desk, then yes i would agree, i usually end up resting my feet on my subwoofer, i may just get rid of the PC that's under there since i only use it maybe once or twice every 3 months.

For the mounts i use a VIVO Triple monitor mount they works pretty well for my 2x 27" monitors and would recommend it. The worst part was putting it together, granted i never have put anything like that together before.

Yeah. good catch, it is under the table, an old Apple adapter, Apple M8661LL/B DVI to ADC Display.

It works like a charm, but is huge.

I have that same desk! The keyboard tray sucks and it also scratches easily.

I have my wires twist tied to the back using plastic tie mounts right along the top section. It makes it look a lot nicer, for like 3 bucks!

Yeah, here’s a link to it on Amazon

cyberpower pc

It’s really good for a prebuilt

I'm pretty sure most of the shock mounts for the yeti can be mounted to a traditional 5/8 mic mount so a combination of this arm with a shockmount like THIS could work


EDIT: or even THIS could work

Use one of those banana holder things. They are pretty cheap.

Here is one

https://www.amazon.com/Home-Basics-Flat-Banana-Hanger/dp/B004S8GMTS/ref=mp_s_a_1_16?adgrpid=56343688979&gclid=EAIaIQobChMIjuq7uuOm5QIVCf5kCh2gcAK2EAAYASAAEgL7rPD_BwE&hvadid=274745406385&hvdev=m&hvlocphy=9033697&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=18183548185877344571&hvtargid=kwd-297628129630&keywords=banana+hanger&qid=1571434981&sr=8-16

http://www.amazon.com/gp/product/B003BYRO7O/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

Pretty generic.

This one is also pretty cheap.

Thanks! The keyboard is a Keycool 87 with Logitech G710 keycaps. The cable I’m using is a LINDY Coiled Cable.

Thanks! Just a Banana Stand

[These] (http://smile.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1) will help you get started on cable management.

SteelSeries 4HD

It's the audio-technica 2500 usb http://www.amazon.com/Audio-Technica-ATR2500-USB-Cardioid-Condenser-Microphone/dp/B004QJREXM

did you mean mic stand or laptop stand?

Amazon.

I think they're these.

http://www.amazon.com/gp/offer-listing/B00B2HH7G0/ref=dp_olp_used?ie=UTF8&condition=used

I have been using this monitor since February 2013 and still have zero problems with it. This is the cheapest most efficent 120+hz monitor out there. The next step up would be ips panel @ 2k or straight up 4k monitor. I also work for an amazon warehouse and the used ones listed for 224$ are usually just damaged boxes and they work fine.

I got the 8350 i have been working on a good OC. btw I hated the pci colors so i found these.

http://www.amazon.com/gp/product/B005CWU3XA/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

Personally, I wouldn't skimp on HDMI splitters. The cheap ones REALLY suck and you start getting signal problems quick. It's going to be hard to find a three way splitter, most of them come in 2 or 4. Like so: http://www.amazon.com/portable-Powered-Splitter-1080P-Support/dp/B003JAXBWW/ref=sr_1_5?ie=UTF8&qid=1393713829&sr=8-5&keywords=hdmi+splitter+1x3