Top products from r/ShinyPokemon
We found 12 product mentions on r/ShinyPokemon. We ranked the 11 resulting products by number of redditors who mentioned them. Here are the top 20.
1. Pokémon Ultra Sun & Pokémon Ultra Moon Edition: The Official National Pokédex (Pokemon (Prima Official Guide/Official Pokedex Guide))
Sentiment score: 0
Number of reviews: 1
2. G & F 8126S Cowhide Leather Thumb Guard, Thumb Protection, Small, Finger Guard Sold Separately
Sentiment score: 0
Number of reviews: 1
100% Cowhide LeatherSturdy surfaceSize small-Generally the smaller adult hand sizeThumb Guard Only, finger guard sold separately
3. Robic M-357 Tally Counter
Sentiment score: -1
Number of reviews: 1
Lap and rep counter, ideal for a variety of athletic training activitiesNo batteries required; counts up to 9,999Instant reset knob and comfortable finger gripDurable, attractive, chrome plated caseIncludes limited lifetime manufacturer's warranty
4. Kingston 4GB TF TransFlash MicroSD SDHC Memory Card (Class 4)
Sentiment score: 0
Number of reviews: 1
5. Gowoops Micro Board for Arduino, Leonardo Mini Controller 5V 16 MHz ATmega32u4 Module
Sentiment score: 1
Number of reviews: 1
Arduino Micro is a mini controller based on Atmega32U4Arduino Micro has 20 input output pins(7 PWM output and 12 analog input)Due to super small zise, Arduino Micro is intergrated to mini breadboard very easilyOwning to Atemga32U4,Arduino Micro can realize USB communications and control as the same ...
6. Digi 1st TC-04 Hand Tally Counter, Digital Pitch Counter Clicker Handheld Mechanical Number Click Counter
Sentiment score: 0
Number of reviews: 1
Accurately counts to 9,999 in increments of one.Made from quality materials to ensure an accurate count each time you press the button.With a body composed mainly of metal, the counter can endure most any daily usage and impacts.Ideal for counting attendance, laps run, game scores, or any activities...
7. ELEGOO Upgraded Electronics Fun Kit w/Power Supply Module, Jumper Wire, Precision Potentiometer, 830 tie-Points Breadboard for Arduino, Raspberry Pi, STM32
Sentiment score: 1
Number of reviews: 1
The highest cost performance knit with more than 300Pcs componentsDatasheet is available to download from our official website or you can contact our customer serviceBetter improvement from our customers' suggestionGreat quality and packing in a plastic boxNot including the controller board
8. HORI Nintendo Switch HORIPAD Wired Controller Officially Licensed by Nintendo - Nintendo Switch;
Sentiment score: 2
Number of reviews: 1
Officially licensed wired controller for Nintendo SwitchTurbo functionsDetachable D-pad adapterPrecision offset analog sticksFast-action trigger shoulder buttons
9. HORSKY Clicker Tally Counter Hand Pitch Lap Counter Manual Mechanical Handheld Clicker with Finger Ring Sliver Digit Number for Knitting Row Crochet
Sentiment score: 0
Number of reviews: 1
👍COUNTS RANGE:up to 9999 ,once a time.It counts from 0 to 9999 and when you press once it counts for one.Works well for counting walking laps, crochet/ knit rounds, etc👍NO NEED BATTERY:Do not need to worry about it can not be used after a long time!Because it is a machenical tally counter,you ...
10. DIYmall TCS34725 RGB Sensor RGB Light Color Sensor Recognition Module with IR Filter White RGB LED Resistor for Arduino UNO R3 Mega
Sentiment score: 1
Number of reviews: 1
11. Hori Nintendo Switch Split Pad Pro (Black) Ergonomic Controller for Handheld Mode - Officially Licensed By Nintendo - Nintendo Switch
Sentiment score: 0
Number of reviews: 1
Full-size controller experience in handheld modeLarger grip, buttons, triggers, analog sticks, and D-PadProgrammable rear buttons, Turbo, assignable buttons, and moreDaemon X Machina branding & accentsOfficially Licensed by Nintendo
-1. You need a LOT of watts, and to do that you need to use the raid den exploit.
This video explains it well, except he says you need nintendo online and you don't.
https://www.youtube.com/watch?v=KdPRbS-HwSc
It can kind of suck to do this for watts. I got 2 million from going for each Gmax and I had fun doing it, so that's what I recommend. You're fine with just half a million for any singular fossilmon though.
-2. Spend it at the Focus digger of the digger duo. That's the one on the left. You'll get a lot of all 4 fossils this way, but you'll get around 5 times more of 2 of the four possible fossils. (Drake and Fish for Shield, Bird and Dino for Sword) You'll also get bottle caps and money items. Now this can really suck, so I really recommend buying one of these:
https://www.amazon.com/Nintendo-Switch-HORIPAD-Controller-Officially-Licensed/dp/B01NAUATSM?th=1
Yes, it's a little silly to buy a controller just for this, but I've had it help me in other games as well. The main thing about this turbo controller is that it can turbo press the button for you, so you can just leave the console by itself overnight. But if you don't mind pressing A a lot...
Also, watch out for items hitting cap, particularly the money items.
-3. Now we have a bunch of fossils. After a little over half a million I had about 250 of 2 kinds and about 50 of the other 2. Go to Cara Liss, and figure out what fossils you need to store to enable you to create a fossilmon with just pressing A and no directional movement.
-4. Once you have that all set up, save in front of her, and just turn on the A turbo button again. When she's all done, check for shinies and then soft reset if there's none to be found. For smaller volumes it was fine to just keep an eye on it. I used about 25 combinations for one of the mons and it reset every 8 minutes. But for Dracovish I had 250 combinations ready so it took about 78 minutes.
I took note of this because it was distracting for me to have it on screen and keep psyching myself thinking maybe I saw a shiny and stopped everything to check. So I set up an alarm every time I reset and turned the TV off or switched the channel.
LMK if you have any questions!
General QoL tips:
This might sound a little discouraging but the only reference I used when making this thing was an Imgur album of someone else's shiny hunting machine: https://imgur.com/gallery/fsRkv
I actually did all the code myself using arduino C/C++ code and I would share it but it's hot garbage that barely works and you actually need to edit the code for every new Pokemon you want to hunt.
There are also no real guides on this (or at least there weren't any that were easy to follow when I made mine about a year ago) so I just used a lot of trial and error. I spent a solid two weeks working on this and tweaking it daily before it was functional and it was an extra week before I managed to find a shiny with it.
What I can help with is where I got the parts:
Breadboard and electrical components:
https://www.amazon.com/gp/product/B01ERPEMAC/ref=oh_aui_detailpage_o04_s02?ie=UTF8&psc=1
Servo motors:
https://www.amazon.com/gp/product/B015H5AVZG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
RGB light sensor:
https://www.amazon.com/gp/product/B077QF7SR3/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Arduino controller:
https://www.amazon.com/gp/product/B00J1X5B7Y/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1
The thing on the left of the DS is just a counter.
Like this:
https://www.amazon.com/gp/aw/d/B071W3QTBX/ref=mp_s_a_1_1?ie=UTF8&qid=1520613030&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=counter+clicker&psc=1
Hahaha it’s not a case- it’s the new HORI joycons https://www.amazon.com/Nintendo-Switch-Machina-Ergonomic-Controller-Handheld/dp/B07T5QKKVP
Give them 8/10. Much more comfortable but no rumble or gyroscope
http://www.amazon.com/8216S-Cowhide-Leather-Finger-Separately/dp/B0002IY0HE/ref=sr_1_2?ie=UTF8&qid=1396549109&sr=8-2&keywords=thumb+guards
I use a Pitch Counter. I just click it while the game is restarting.
yo I got you covered https://www.amazon.com/Pokémon-Ultra-Sun-Moon-Official/dp/0744019362/ref=sr_1_7?s=books&ie=UTF8&qid=1521469629&sr=1-7&keywords=pokemon
Would this work?
How barbaric. No calculator? No cell phone? Not even one of these doodads?