(Part 3) Top products from r/Vaping

Get yourself one of these to tighten the brass screw on the bottom of the mod by the battery door. All the power used relies on it being tight, and it's a delicate screw. Hardware store brand tools will strip the head right out. Good mod otherwise. Also, Artic Fox firmware is great on it if you like playing with that sort of thing.

Wiha 96705 Torx Screwdriver with Precision Handle, T5 x 40mm https://www.amazon.com/dp/B000T9XPU4/ref=cm_sw_r_cp_api_aw9UBbFZ5BVDE

Haha thanks since everyone seems to like the stuff on my desk here's a link to the radio......



https://www.amazon.com/gp/aw/d/B001BGGD8A/ref=mp_s_a_1_1?ie=UTF8&qid=1501094933&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=wr-11&dpPl=1&dpID=51HFr3byQcL&ref=plSrch&th=1&psc=1

I loved this sign so much, I made it into a Shirt. I hope you guys like it!

https://www.amazon.com/dp/B07YY89C7K


Edit: (I barely make any profit of it, bout 10 cents, if its considered illegal advertising despite that feel free to remove)

http://www.amazon.com/Heaven-Fresh-HF-Ionic-Purifier/dp/B000YBXDVS i have 3 of these(much older/different brand, but basically exactly this) around the house, and i keep a ceiling fan on... i am not sure what your solution is meant to solve but i don't have any cloud buildup in the house.

There is a bunch of different names and brands. But those rubber strap wrenches work great and don't do any damage.

Here's a example
http://www.amazon.com/Rubber-Strap-Wrench-6-in/dp/B0002H338C

For mixing I recommend a cheap milk frother. After I've added all the ingredients I give it a good blitz for a couple of minutes, This really only works if you're mixing a decent amount (say 50ml+) in a bowl/jar before pouring into a bottle.

This is what I use. Le'Xpress Frother

Grab one of these for 6 bucks and toss it on your counter or vape shelf. Best 6 bucks I ever spent.

For day to day carrying, I keep my juices in my backpack in a Xikar 5-cigar travel humidor - it's lightweight, padded for protection on the inside, and solid enough that it can withstand being run over by a truck without damaging the contents.

For my longer jobs like drilling and grinding the air holes on kayfun lite clones I actually hold it under dripping water in the sink. For smaller quick jobs I've used old e liquid, since it can be a pain in ass to wash out machine oil and I have a bad full of e liquid that I don't use. If you use the automotive sand paper you can just wet it with water, the paper I got is made for wet sanding. I think I got it from Walmart it was years ago when I was panting truck parts so it may have come from an auto parts store.

This is the last diamond bits I bought

Just take it slow on the glass and smooth the sharp and I think you'll be happy with the difference it makes. Oh and if you try to mod any metal parts don't force the bits down into tight holes like small air holes because they can overheat and break of in the hole and it sucks trying to get them back out. I learned how important patience is real quick doing that, and keeping your work cool and lubed.

Seems about as wise as having Lego branded fruit snacks. Watch as a kid chokes on the real thing.

Use these.

Akro-Mils 10144 D 20-Inch by 16-Inch by 6-1/2-Inch Hardware and Craft Cabinet, Black https://www.amazon.com/dp/B003P2UOCO/ref=cm_sw_r_sms_c_api_TzcEAbF5M3CEY

Who said it has to be more?

Turkey baster? Not the brush kind but the kind that’s basically a giant eye dropper.

Example: Norpro Nylon Baster https://www.amazon.com/dp/B000HEIUBU/ref=cm_sw_r_cp_api_i_3AtSDb3GAQX93

All Thread Rod?

This

Or this

Both of which are available at your local grocery store or Walmart.

Right. Sorry, I did some math; you're not discharging at 35 amps.

You're discharging your cells at approximately 36.52amps.

You should probably check these out for the future.

Don't know about "best" but I use this one: https://www.amazon.com/dp/B001DKDAVW/ref=cm_sw_r_other_awd_slH3wbYMXC4N7

Pros - cheap. Has lasted almost a year.

Cons - small (~six maybe seven 30ml bottles). Timed (so it doesn't just stay on, has a three minute timer - I get around this with a rubber band and a cork, just holds the button down).

Other notes - gets hot. Not only can you burn out your motor but you can also kill bright/top notes in your juice if it gets too hot. Best to do 15/15/15 on/off/on.

Here is my setup:

• ProVari 3
  
• The Russian 91% v2 RBA
  
• Cotton Roll Sterile (1 lb) 12-1/2" x 56"
  
• TEMCo Kanthal A1 wire 28 Gauge 100 Ft Resistance AWG A-1 ga
  
• Walant 3PCS Wire Coiling Tool CW-20 CW-25 CW-30 Coil Builder Maker
  
  The battery for the P3 last me 16 to 18 hours before I have to charge them again. I usually buy 2 batteries and have one in reserve fully charged.