(Part 2) Top products from r/bravia

VonHaus 23-56" Double Arm Tilt & Swivel TV Wall Mount Bracket with Built-In Spirit Level for LED, LCD, 3D, Curved, Plasma, Flat Screen Televisions - Super Strong 45kg Weight Capacity https://www.amazon.co.uk/dp/B00N50Q66Y/ref=cm_sw_r_cp_apa_CXZ7BbXA92YME

I'm using a cheap Logitech wireless keyboard that has a track pad. You have to plug in a USB module into your TV that came with the keyboard but it works great and batteries last forever. I have a 2015 XBR55X850C Bravia.

Logitech Wireless Touch Keyboard K400 with Built-In Multi-Touch Touchpad, Black https://www.amazon.com/dp/B005DKZTMG/ref=cm_sw_r_cp_apa_IHoEzb5PA9B9Z

I don't think so (correct me if I' wrong). I find this feature is quite useful and IMHO it should be available in these high level TVs. Fortunately there are some external decives which can be connected through the spdif output and allows you to connect two bluetooth headsets. For instance this one:
https://www.amazon.com/gp/aw/d/B07JJCZ3WL/

Note: I've not tried this specific one :)

Yeah on our old TV we couldn't get any good reflection from anywhere it seemed like. We moved into a new house that's a story and a half type design and so the room where this TV was was in an area with more of an open floorplan so there's nothing really to reflect off of.


So I had bought an IR blaster that I fished through the wall and bought an IR shield cover. And more or less just stuck the IR blaster directly on top of the IR receiver on the old TV.

https://www.amazon.com/Cmple-Emitter-Stick-Infrared-Emitters/dp/B004WLA25G


https://www.amazon.com/Infrared-Extender-Extension-Transmitter-Compatible/dp/B01H5A3IWY/ref=pd_sim_23_38?_encoding=UTF8&psc=1&refRID=98GSE8F3JJVSRNAM14D2


From there I used the 2nd IR port on the harmony hub.

Hey OP, I had the same problem as you and found a nice plug that turns it off for me when it detects standby mode.

https://www.amazon.co.uk/Protected-Energy-Socket-Remote-Sensor/dp/B00E0M9RE4/ref=sr_1_1?ie=UTF8&qid=1525075304&sr=8-1&keywords=eon+plug

Works perfectly with my sony bravia. If it detects standby after 2min it will power it off. Turns back on with the remote power button.

I bought this and it works perfectly for what I wanted.


https://www.amazon.com/gp/product/B00AMTRR5K/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Amazon basic monitor arm should handle 32"

PS. I have dual monitor arms - totally enjoy it

https://www.amazon.com/AmazonBasics-Premium-Single-Monitor-Stand/dp/B00MIBN16O

And the same Amazon app runs fine on every other legitimate platform. The Sony hardware+bloatware is an unforgivable abomination. It's like complaining the Amazon app doesn't work well on a SpeakNSpell.

I have not received the cable in the link, a few sources indicated it will not work so I bought a different one that arrived sooner. Installed this yesterday. Works great and solves my problem. The receiver was able to be hidden on the underside of a shelf on the tv stand and the small IR blaster is un-noticeably stuck on the IR receiver of the TV. I have not noticed any lag from the set up.


The only thing I will say is if you use a USB port on the TV then you will still need to "shoot" the on command over the power bar since it receives no power when the TV is off. Can be easily fixed by using the included power adapter instead.

You could try something like this if dirty power is an issue.

​

https://www.amazon.com/Furman-SS6B-Plug-Surge-Protector/dp/B0002D017M/ref=sr_1_20?ie=UTF8&qid=1549502401&sr=8-20&keywords=power+conditioner

​

https://www.amazon.com/gp/aw/d/B002K8H7XS?psc=1&ref=yo_pop_mb_pd_title

I ordered three of those because I felt the connection in the back was too tight because the area where the ports are is curved and was afraid it would stress and damage the ports over time. They work perfectly and keep the cables totally secure.

It probably will. I don't have any trouble plugging in a dongle for my wireless keyboards like this one or this one.

https://www.amazon.com/dp/B006K3CM4S/ref=cm_sw_r_cp_awdb_t1_kpNzDbMBP9B4V

Use this for hiding the cables. But you’ll need to take the TV down

I am using these two: Logitech MX Anywhere 2 Wireless Mobile Mouse / Logitech Bluetooth Illuminated Keyboard K810. Haven't used more than 15 minutes with Sony TV, but I don't think there will be any issues.

I tried the cable that came with the tv and it doesn't work as a receiver. Looking at getting the receiver in the link, anybody try one of these?

Infrared Resources 9ft 38-56kHz Dual Band External Universal IR Receiver Extender for Verizon FiOS + Most Cable Boxes and DTA Units. https://www.amazon.com/dp/B002JSDHCY/ref=cm_sw_r_cp_apa_i_LLEYDbQVPBGAE

I have been using these for over a year and despite what input I place them in all I get is no signal check external input or select another input.

I would imagine not without installing some other Linux on it and using cups - but I could be wrong. Not sure it's worth messing up what's probably a nice Bravia TV.

​

Have you considered a USB print server to add networking to the printer? What you're trying to do isn't uncommon, people add networking to USB only printers often. https://www.amazon.com/IOGEAR-1-Port-Print-Server-GPSU21/dp/B000FW60FW

No, it's not the deleycon.

Between PC and AVR I have this one: https://www.amazon.de/gp/product/B004BIG55Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

​

Between AVR and Tv I have 2.

AVR MainOut to TV HDMI 3 in: https://www.amazon.de/gp/product/B01MFFACPB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

AVR SubOut to TV HDMI 2 in:

https://www.amazon.de/gp/product/B005M0W2ZY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

...or vice versa, I'm not 100% sure, but they should only differ in color.

​

PC connection is currently: PC -> AVR -> AVR SubOut -> TV HDMI 2 in

...Maybe I should check if it's the same on HDMI 3 in?