Reddit reviews 303 Rubber Seal Protectant and Conditioner for Weather Seals - 3.4 fl. oz.

I have read (even in non-Tesla forums) that using something like this helps the window from sticking to the rubber seals.

303 Rubber Seal Protectant and Conditioner for Weather Seals - 3.4 fl. oz. https://www.amazon.com/dp/B00T44D1R2/ref=cm_sw_r_cp_api_JBh7Bb00V3DRV

There are many options on amazon that help with freezing. Or so they say.

I use 303 for this. They make a product specifically for rubber trim but I just use the regular protectant spray on a microfiber towel. Works well.

You can get replacement tires for many G1 toys. Just search Amazon for "rubber tires model car" and there are plenty of options. Just measure the size of the tires you need and find something suitable.

You can also find diecast toy cars at places like Walmart for $2-3 that have rubber tires that are compatible with some G1 toys.

You can also use some rubber seal protectant to keep the tires of your toys from drying out. Just use it sparingly.

https://www.amazon.com/303-Rubber-Protectant-Conditioner-Weather/dp/B00T44D1R2

You can also get replacement tires for RID Prime on Shapeways:

• https://www.shapeways.com/product/QUDQKJFPW/fire-convoy-big?optionId=59112847
  
• https://www.shapeways.com/product/8BC9B2CAB/fire-convoy-small?optionId=61226601

Is this what you're looking for?

http://www.amazon.com/einszett-914806-Gummi-Pflege-Rubber/dp/B004B8GTQG/

http://www.amazon.com/303-30324-Rubber-Seal-Protectant/dp/B00T44D1R2/

>Doors freeze shut when it’s cold.

Yeah, I know, right? It normally happens when you have a slightly warmer day (enough to allow some melted snow to get into the door's track) followed by a much colder night. Next morning, frozen door. It's not the glass or the seal freezing, it's the water. Adding a lubricant to the seal usually does the trick. Someone above recommended the following, sound like a plan for those in a colder climate.

303 Rubber Seal Protectant and Conditioner for Weather Seals - 3.4 fl. oz. https://www.amazon.com/dp/B00T44D1R2/ref=cm_sw_r_cp_api_JBh7Bb00V3DRV

The free way to perhaps help would be to clean your gaskets along the doors/hood/ and windows as well as their mating surfaces with just warm soapy water and rinsing them off. You could also buy a quality water-based gasket conditioner to treat them with after cleaning them to counteract any drying out with something like this or this!

I would clean it with light abrasion (microfiber towel is probably ok) and any sort of all purpose cleaner. I'm not sure if it's reversible, but there are products that are meant for that sort of material. If you google "gummi pflege" you should find a couple. I personally have this stuff but haven't used it a whole lot.

303 is great stuff. That's what I use. My 2003 is still original top but I've had to patch it in a couple of small spots, due to wear from the bars.

This is what I was referring to for the door and window seals: 303 Rubber Seal Protectant and Conditioner for Weather Seals - 3.4 fl. oz. https://www.amazon.com/dp/B00T44D1R2/ref=cm_sw_r_cp_apa_5LDIAbS9Y0J4B

Which one of these for door seals that are sticky?

nextzett


303 Rubber seal

Something like this: 303 Rubber Seal Conditioner?

Is there a difference between 303 rubber seal protectant (https://www.amazon.com/gp/aw/d/B00T44D1R2 )and the normal aerospace protectant other than the applicator bottle and the price?

Mineral oil might work, it depends on the rubber. There's a good chance that you could damage or ruin them too, just be aware of that going in.

Here are some other products that might work:https://smile.amazon.com/MG-Chemicals-408A-125ML-Rubber-Liquid/dp/B008O9X3KS/

https://smile.amazon.com/303-Rubber-Protectant-Conditioner-Weather/dp/B00T44D1R2/


Edit: I was assuming they were older speakers and the reason the rubber was stiff was from drying out/hardening over time. If these are new speakers (i.e. the rubber is less than a decade or two old) you really shouldn't be trying to soften them up.

https://smile.amazon.com/303-Rubber-Protectant-Conditioner-Weather/dp/B00T44D1R2?sa-no-redirect=1

Have you tried applying this product to the rubber seals? Obviously you shouldn't have to, but it helped significantly quiet down my panoramic sunroof seals.

https://www.amazon.com/303-Rubber-Protectant-Conditioner-Weather/dp/B00T44D1R2

> you should periodically add rubber protector or conditioner to the weather stripping / seal to keep it conditioned.

Had never heard of this, so I went and bought this stuff: https://www.amazon.com/gp/product/B00T44D1R2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Thanks for the heads up!