Reddit reviews AES Industries 51823 Smart Eraser Pad (Made in the USA) with Drill Adapter Arbor Made for Efficiently Removing Decals, Vinyl Graphic, Pinstripes, Adhesive and Double Faced Trim Tape
We found 14 Reddit comments about AES Industries 51823 Smart Eraser Pad (Made in the USA) with Drill Adapter Arbor Made for Efficiently Removing Decals, Vinyl Graphic, Pinstripes, Adhesive and Double Faced Trim Tape. Here are the top ones, ranked by their Reddit score.
BOXED KIT INCLUDES: AES Industries 4" Diameter USA Made Smart Eraser Pad, 3/8" Drill Arbor and Complete Instruction Sheet.DEVELOPED to dramatically reduce time spent on the removal of Vinyl Pinstripes (old and new), Adhesive, Decals (old and new) and Double Faced Tape without damaging the underlying surface or the use of harsh chemicals, heat guns or scraper blades.SAFE & EFFECTIVE to use on Urethane, Acrylic Paints (not Lacquer based paints or Tri-Stage Paints) and Fiberglass without the worry or gouging or scratching the topcoat.PAD SPECIFICATIONS: 4" Diameter pad with 5/16"-24 threaded stud, for best end results use at speeds between 3,200 and 4,000 RPM.EASY TO USE: (Complete Instruction Sheet with Images Included) Attach the pad onto the drill arbor and then onto your drill, with the pad running and at an angle, bring the edge of the pad to the decal or graphic being removed and apply light to medium pressure as you move the pad horizontally or vertically along the decal or graphic to begin erasing. If any residue is left behind you can take a soft cloth and a mild polish and by hand wipe the residue away quick and easy.
If you have access to a drill, an eraser wheel is by far the easiest way. Just make sure the surrounding paint is clean to prevent scratches.
This is the one I have, I used it to remove body molding adhesive:
https://www.amazon.com/gp/product/B00488DDB8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
My favorite method is an eraser wheel.
Heat the glue with a heat gun, or at the very least use a hair dryer (but that won't be as effective). Once you're able to pull an edge up, keep working your way around with a plastic scraper or dental floss. Don't just start pulling it off with your hands, as you might take some paint with it.
Once the piece is removed and you just have some adhesive left on the body panel, you can use adhesive remover and a lot of elbow grease, or use an eraser pad that has a drill adapter to make quick work of it.
Get yourself one of these. Eraser Wheel if you have a drill, these work great.
Eraser wheel. I used one on some molding adhesive and with a little time and patience it takes everything off without hurting the paint.
An eraser wheel will get that right off.
http://smile.amazon.com/gp/product/B00488DDB8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
This is what mine looked like about halfway through.
Imgur
What was left I clayed with nanoskin and then polished it up. You cant tell the wing was ever there.
Eraser wheel?
AES Industries 4" Smart Eraser Pad with Drill Adaptor Arbor [Made In USA]
http://amzn.com/B00488DDB8
If they're adhesive pinstripes, this thing will take the old stripe off in no time at all, and you could either get pinstripe tape, or take it to someone to run the lines with paint, shouldn't be too spendy. I'd talk to a painter if they're painted on, though.
Get an eraser wheel off of amazon, I did it and it was super easy to remove the pinstriping.
http://www.amazon.com/AES-Industries-Smart-Eraser-Adaptor/dp/B00488DDB8/ref=sr_1_1?ie=UTF8&qid=1419617431&sr=8-1&keywords=eraser+wheel
This tool has worked well for me, removed a lot of stickers and decals
In another thread someone suggested a smart eraser - http://www.amazon.com/gp/aw/d/B00488DDB8
They said that it worked really well. I'll be trying it out Monday on a large amount of adhesive
I upgraded my method this time around and it went a lot better than my last car. I used a heat gun to warm up the badge (kept checking surrounding paint with my fingertips) then used some braided fishing line (25lb) with zip ties on each end to save my fingers. Sawing motion with the line behind the badge. After I carefully pop it off I did a combo of rolling the adhesive off (quick heat gun helps) with my fingers and using an eraser pad at low RPMs. Those things are amazing and it did zero damage to the paint. Rinse, wash and wax the area afterwards. If the truck wasn't brand new it might need some paint correction to make things look right.
Way cheaper than what the dealership wanted and only took me 30mins.
A plastic razor blade and some liquid adhesive remover will work as others have mentioned. Another alternative is a eraser wheel. You just need to be careful with these as they create a lot of friction and burn plastic fairly easily. They are the correct tool for the job though.
Eraser Wheel
Grab one of these from Amazon or locally if you can find one and hook it up to a drill. People (myself included) use these to remove decals and such from vehicles. So if it is safe enough to use on automotive paint you can be assured that it won't hurt your flooring.
You will have it up in no time with one of these.