Reddit reviews Apoxie Sculpt - 2 Part Modeling Compound (A & B) - 1/4 Pound, White
We found 6 Reddit comments about Apoxie Sculpt - 2 Part Modeling Compound (A & B) - 1/4 Pound, White. Here are the top ones, ranked by their Reddit score.
PERFECT FOR YOUR NEXT PROJECT - Apoxie Sculpt combines the features and benefits of sculpting clay with the adhesive power of epoxy! Perfect for your next cosplay, craft project, or home décor!NO BAKING - Unlike traditional modeling clay, Apoxie Sculpt cures hard in 24 hours with a semi-gloss finish, making it perfect for additions to costumes or crafts that are too large or delicate for the oven.STRONG ADHESIVE POWER - Because it adheres to nearly any surface, it's great for sculpting, embellishing, bonding, and filling almost any project!PACKAGED BY HAND - You might notice a fingerprint or two when you open a new container of Apoxie Sculpt—don't worry, it hasn't been used! Each container is carefully packaged by hand.MULTIPLE COLORS AVAILABLE - Apoxie Sculpt is available in 12 vibrant colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze. If you are looking for a bright white color, please check out our Super White Apoxie (our regular Apoxie Sculpt white is more of a copy paper white vs bright white).
I prefer Aves Apoxie Sculpt. It is two part (like greenstuff), you mix equal parts A + B; unlike greenstuff it thins and cleans up with water - dip[ your tools/fingers in water to stop the putty from sticking. The plain is a grey color; it also comes in white. It comes in a small "starter" size; you can also get it in quarts (if you do lots of sculpting). My little pots have lasted 5+ years without drying/spoiling. Clay shaping/carving tools work well with Apoxie Sculpt, and dental tools are great for adding scale detail (fur/hair, cloth folds, chainmail, etc.).
I recommend apoxie sculpt. You can fill the crack smooth it out and when it dries paint over it. I use it all the time for all sorts of stuff. It should work fixing this.
If it's not too late, I've had success with Aves Apoxie.
https://www.amazon.com/Apoxie-Sculpt-White-modeling-compound/dp/B0013UFM7M
Run a search on action figure customizers using the stuff for tutorials.
You could try some epoxy sculpt. It hardens like plastic. Also you should still be able to bend the wing one it sets.
Apoxie Sculpt 1/4 lb. White, 2 Part Modeling Compound (A & B) https://www.amazon.com/dp/B0013UFM7M/ref=cm_sw_r_cp_apa_i_C3CDDbWFCK76G
https://www.amazon.com/gp/aw/d/B0013UFM7M/ref=yo_ii_img?ie=UTF8&psc=1
Yea that's it. I didn't realize they spelled it with an A
Oh yeah I should have mentioned that. I have this two-part sculpting epoxy (Aves, here: https://www.amazon.com/Aves-Apoxie-Sculpt-White-pound/dp/B0013UFM7M/ref=sr_1_3?ie=UTF8&qid=1523965655&sr=8-3&keywords=aves+apoxie+sculpt)
You take the two parts and smoosh them together like clay and roll and mix them until they're a uniform smoothness. I used about a nickel-sized amount of each for the Surfer head. So once it's mixed, I stuffed it into the empty cavity of the head, then placed the head onto the neck ball joint, letting the epoxy form a mold around the ball. I let it sit like that for a minute just to ensure a good mold, then took off the head again. I let it sit about 24 hours. The epoxy will harden and solidify in that time. After it was cured, I had a perfectly-molded socket for the ball joint on Surfer's neck.
You could do the same thing with Green Stuff or Sculpy as well, if you can't get Aves.