Reddit reviews Art 'N Glow Clear Casting and Coating Epoxy Resin - 16 Ounce Kit
We found 5 Reddit comments about Art 'N Glow Clear Casting and Coating Epoxy Resin - 16 Ounce Kit. Here are the top ones, ranked by their Reddit score.
Use our clear epoxy resin for all of your casting AND coating applications. Hardens crystal clear and hard as a rockRigorous testing was done to ensure that our resin is a perfect match for all of our glow in the dark and other craft pigmentsOur resin is self leveling, self degassing, odor free, resistant to yellowing from sun exposure, and is made in the U.S.A.One to one mix ratio is fool proof and has a forgiving 40 minute work timeUse to coat tables and bars, encapsulate objects, cast figurines and jewelry, make resin paintings and more
Art N Glow, personal fave. Got mine off of Amazon here https://www.amazon.com/dp/B07BM9LHRB/ref=cm_sw_r_sms_apa_i_NbpVDbMX0D84V
here is the resin
here is the silicon
here is the dye
i'm a poor art student so i've gone kinda the cheaper route, other stuff you might need are popsicle sticks, styrofoam cups to make your molds, and glitter and whatsuch if you'd like to go that route. over all i put about $60ish into the stuff i've linked above. good luck dude!
(edit: formatting bc mobile :p)
Hey there, basically you are going to need a clear epoxy resin- it comes in two parts and you mix only what you need right then. Lots of tutorials on the web for that. Here's a link to a popular one on Amazon.
https://www.amazon.com/dp/B07BM9LHRB/ref=cm_sw_r_cp_apa_i_fnomDb01166D6
Sure thing. So first thing I did was go outside and find some Rocks. Probably the hardest part. Had to find one with a flat bottom that I liked. I then make a mold out of it using Silicon Smooth-on stuff.
After I had the mold I built the harness which is just the Flickering LED attached to a CR2032 Holder, a 150 resistor, and a Switch. Ill update the imgur album with pics of the process when im not making50 more of these.
After building the harness I mixed the resin One I used with some dye and poured it in. then I built a little holder to hold the harness just out of the resin and let it dry for 8 hours. Then bam 1 soul stone is made. You should have enough mold to make about 5 molds of different stones pending on size. Let me know if you have any other questions.
I’m glad it’s staying shiny! I buy my resin on amazon: Clear Casting and Coating Epoxy Resin - 16 Ounce Kit https://www.amazon.com/dp/B07BM9LHRB/ref=cm_sw_r_cp_apip_qqqmCoR7iGUkh
It’s an easy 1:1 mixture, the hardest part is keeping hair/animals/fingers away from it while it cures!