Reddit Reddit reviews Bgears Cooling Fan Adapter 140mm-Black Black

We found 11 Reddit comments about Bgears Cooling Fan Adapter 140mm-Black Black. Here are the top ones, ranked by their Reddit score.

Electronics
Computers & Accessories
Computer Case Fans
Computer Components
Internal Fans & Cooling Components
Computer Internal Components
Bgears Cooling Fan Adapter 140mm-Black Black
Convert 140mm to 120mm mountingConvert 120mm to 140mm mountingThe Fan Adapter funnel design will channel airflow through the 120mm ventilation hole on the chassis.4 screws included
Check price on Amazon

11 Reddit comments about Bgears Cooling Fan Adapter 140mm-Black Black:

u/theotherdanlynch · 2 pointsr/buildapc

Well, first of all, flip your CPU radiator around as an exhaust. Unless somebody reversed your front fan, the front fan is mounted as intake by default.

For the GPU radiator, you really don't want to mount it in the bottom if you can avoid it. I would spend $8 an Amazon and mount it in the top.

Are you using any of the drive cages? It looks like they're all empty. If they are, I would take them out and move both radiators to the front as exhausts. I would take the factory installed fan from the front and put it in the back as an intake.

u/andisblue · 2 pointsr/watercooling

https://www.amazon.com/Bgears-Cooling-Fan-Adapter-140mm-Black/dp/B0043GMY1U

u/abz_eng · 2 pointsr/freenas

Build your version of these adaptors?

If you have space/time you can go bigger :-)

u/glucoseboy · 2 pointsr/buildapc

I've used a Corsair H50 and it is great low-profile cooler. Easy to install and decent cooling with minimal noise. However, the radiator does have to go somewhere. The liquid-cooling cables are at a length which makes it mountable in rear-fan or top fan position of most full to mid-sized towers. In looking at your Lian Li case, I don't see a ready spot for the radiator. Possibly in front of the middle 140mm fan. Note: You'll have to jury-rig someway to mount the radiator there as it is designed to match up with a 120mm fan. Perhaps some sort of adapter like this.

u/blimpboy3 · 1 pointr/pcmasterrace

You could buy 120 to 140 adapters

https://www.amazon.com/gp/aw/d/B0043GMY1U/ref=mp_s_a_1_1?ie=UTF8&qid=1511848135&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=120+to+140&dpPl=1&dpID=41FALXBxUzL&ref=plSrch

u/TJMAC25 · 1 pointr/NZXT

If you have the room you can possibly use a 120mm to 140mm fan adapter. This should help: Bgears Cooling Fan Adapter 140mm-Black Black https://www.amazon.com/dp/B0043GMY1U/ref=cm_sw_r_cp_api_lZLazbP7VRWAX

u/werdna87 · 1 pointr/buildapcsales

i was just gonna grab one of these https://www.amazon.com/Bgears-Cooling-Fan-Adapter-140mm-Black/dp/B0043GMY1U/ref=sr_1_3?s=electronics&ie=UTF8&qid=1543282211&sr=1-3&keywords=120mm+to+140mm+fan+adapter

u/dysphoricjoy · 1 pointr/buildapc

ah, I didn't know they make these thanks for the help!

u/You_Gullible_Sheep2 · 1 pointr/buildapc

I would suggest a fan adapter shroud.

https://www.amazon.com/Bgears-Cooling-Fan-Adapter-140mm-Black/dp/B0043GMY1U

u/Son_of_Korhal · 1 pointr/buildapc

What happened to the 120mm rad you had on the CPU lol?

Just for funzies, you could try a cheap temporary solution like this:

https://www.amazon.com/Bgears-Cooling-Fan-Adapter-140mm-Black/dp/B0043GMY1U

u/thunderification · 1 pointr/pcmasterrace

Not with that attitude

Edit: https://www.amazon.com/Bgears-Cooling-Fan-Adapter-140mm-Black/dp/B0043GMY1U