Reddit reviews BOND | Add Wifi to Ceiling Fan, Fireplace or Somfy shades | Works with Alexa, Google Home | Remote Control with App | Works with iPhone or Android
We found 17 Reddit comments about BOND | Add Wifi to Ceiling Fan, Fireplace or Somfy shades | Works with Alexa, Google Home | Remote Control with App | Works with iPhone or Android. Here are the top ones, ranked by their Reddit score.
CONTROL CEILING FANS, FIREPLACES, AND SOMFY SHADES FROM YOUR SMARTPHONE - BOND turns any remote controlled fan, fireplace or Somfy shades smart in seconds. Activate the fan, control fan speeds, and switch on lights—all from your iPhone, Android phone, tablet, Amazon Echo, or Google Home Assistant. With BOND, you’ll be able to use these smart devices to do whatever your remote control could do.ALEXA AND GOOGLE-CERTIFIED - This device is certified by Amazon and Google to work with Alexa and the Google Home Assistant. Control your ceiling fan with voice commands. You’ll never need to reach for the light switch or the remote again. Controlling a ceiling fan and fireplace has never been easier!CONTROL UP TO THIRTY CEILING FANS - A single BOND can control up to thirty ceiling fans from one central location. The BOND can record and transmit RF (radio frequency) as well as IR (infrared) signals, so it will work regardless of what kind of remote you have. The area range is about 2,500 sq. ft. so you’ll be able to control fans in other rooms or on another floor.NO INSTALLATION NEEDED - Set up is extremely quick and easy. Simply plug in the BOND device, download the app to your phone, point your fan remote at the BOND, and you’re done! All of the functions on your remote—including fan speed, light dimmer settings—can now be controlled via the BOND.SMART HOME FUNCTIONALITY WITHOUT BREAKING THE BANK - Everybody wants devices and appliances with smart home functionality, but many of these products are extremely expensive. With BOND, you can make your old appliances smart without replacing them. Our software currently supports ceiling fans and electric and gas fireplaces, but updates are on their way for A/C units, garage doors, and motorized shades!
I think what you want is BOND.
Look at this review here
You'll install a remote-control kit (sold separately, but some are linked in the above review article) and then use BOND to act as an extra, WiFi enabled remote control.
I bought a house with motorized blinds operated by a remote control. I purchased a Bond smart home device to control my ceiling fans. It basically replaced my remote.
https://www.amazon.com/dp/B071GVGVVH/ref=cm_sw_r_sms_apa_i_mBPBCbST25VJ5
It works perfectly with Google Home. The next thing they're adding is motorized blind control. It's a solid device that's as easy to set up and use as any of my smart lights and I can't wait to control my blinds with it.
Bond controller should do it for you. https://www.amazon.com/BOND-Automation-Ceiling-Fireplace-Compatible/dp/B071GVGVVH/ref=asc_df_B071GVGVVH/?tag=hyprod-20&linkCode=df0&hvadid=222189693293&hvpos=1o2&hvnetw=g&hvrand=2172605882425384998&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015314&hvtargid=pla-383275495166&psc=1
I use the Bond Fan controller. It’s not HomeKit compatible yet but the company has said its coming soon. It works well with Alexa to control speed and lights. You would need to have remote control modules in each fan but they are reasonably priced ~$20 per fan.
https://www.amazon.com/BOND-Ceiling-Instantly-Amazon-Compatible/dp/B071GVGVVH/ref=sr_1_1_sspa?ie=UTF8&qid=1516833372&sr=8-1-spons&keywords=bond+home&psc=1
I have a MyQ with Liftmaster openers, so I haven’t tried this but if you’re willing to use Aladdin Connect then it looks like you may be able to tweak the settings via the Lowe’s IRIS app, then use a Homebridge plugin to add it to HomeKit.
EDIT: I really don’t know if that’s possible without Aladdin in the mix.
This might be another option (maybe else someone can verify):
BOND | Smart Home Automation | Make your Ceiling Fan or Fireplace Smart through WiFi | Works with Alexa, Google Home | Remote Control with App | Works with iPhone or Android https://www.amazon.com/dp/B071GVGVVH/
Bond Bridges support RFs between 300 MHz - 434 MHz, but I’m not sure if they can support garage doors yet. It works well for my ceiling fans though.
EDIT: Homebridge plugin here: https://www.npmjs.com/package/node-iris-aladdin-connect-garage-door
EDIT 2: It also just dawned me that Bond does not support HomeKit natively yet. It can be made to work with some Homebridge plug-ins, but I doubt that would help with the garage door problem.
You can also check out BOND. It does IR and RF. There's no HA integration yet, but I'm writing a component now. I've reverse engineered their API: https://github.com/danmandle/bond and will be publishing the HA component in a few weeks.
Well, I have 4 remote controlled fans in my house and wanted the ability to control them with Google Assistant. I bought a Bond , It was a little funky to setup using my Android phone but works flawlessly for me and my family!
From what I can tell, you would need to add both a fan RF Control Kit and some thing like Bond Ceiling Fan Controller, which is Alexa compatible.
The RF Control kit turns your old dumb fan into a fan controllable by a remote.
The Bond clones the RF signal from the remote and will work with Alexa so you can control it with voice.
It might be cheaper to get a remote controlled fan, then use the Bond system of smart control:
https://www.amazon.com/BOND-Automation-Ceiling-through-Compatible/dp/B071GVGVVH
you could airways 'borrow' one, and program something like this (I have 4 of those fans, and all can be controlled with one Bond unit and app). or search for "universal rf ceiling fan remote" on eBay or elsewhere. Good luck!
I just got one of these, works great https://smile.amazon.com/dp/B071GVGVVH/ref=dp_cr_wdg_tit_nw_mr
I have a Hunter fan as well. I bought a Bond device which essentially replicates the RF controller Hunter fans use. Hooked it up to my GHome and it works perfectly.
https://www.amazon.com/dp/B071GVGVVH/ref=dp_cr_wdg_tit_nw_mr
There really isn't much in the form of smart switches for fans.
There is something from Lutron like this https://www.amazon.com/Lutron-Wireless-Lighting-PD-6WCL-WH-Assistant/dp/B00KLAXFQA/ref=sr_1_20?ie=UTF8&qid=1543194776&sr=8-20&keywords=ceiling+fan+smart+switch
I don't know anything about lutron or what infrastructure it requires. It does say it's compatible with Alexa.
if you have a remote for the fan you might look at bond https://www.amazon.com/BOND-Automation-Ceiling-Fireplace-Compatible/dp/B071GVGVVH/ref=sr_1_14?ie=UTF8&qid=1543194776&sr=8-14&keywords=ceiling+fan+smart+switch
which mimics your remote control, but has the disadvantage of being uni directional, or stateless.
There is also an Insteon solution, but you would need at least a hub for that and be decently handy with electrical (as you would with the Lutron to be fair).
If you're intending to draw heat back down, I'm assuming you've reversed direction on your fan? If you reverse direction it shouldn't really feel chilly below.
You can accomplish what you desire with any of the various forms of automation out there. Probably smart things (don't know since I'm not a user), definitely home assistant or node red. Just need to set an automation using either the ecobee as the trigger, or a temp sensor somewhere. You should be able to put the temp sensor somewhere out of visibility. You can control the fan with a smart switch, or something like Bond, which would enable you to use Google home or Amazon Echo to control the fan as part of the automation.
BOND | Smart Home Automation | Make Your Old Ceiling Fan or Fireplace Smart Through WiFi | Works with Alexa and Google Home | Remote Control with App | Compatible with iPhone or Android https://www.amazon.com/dp/B071GVGVVH/ref=cm_sw_r_cp_apa_-Fd7Bb17X33BJ
It's a bit pricey but can control up to 6 fans and you don't need to see it since it will talk to GH or echo over wifi. They go on sale from time to time also.
My understanding is that the Bond uses IR, requiring line-of-sight.
Actually, looking closer at the Amazon listing, the product description mentions IR AND RF.
www.amazon.com/dp/B071GVGVVH/ref=cm_sw_r_cp_api_i_zPBCCbT3FPDDE
I know the Bond doesn’t do native Homekit, but there is a Homebridge plug-in available.
https://www.amazon.com/Automation-Ceiling-Fireplace-through-Control/dp/B071GVGVVH/
It’s $100 but it’ll control your ceiling fans through Alexa. Mine needs to be power cycled like once a week though.
Nope, it knows about a lot of devices and you can custom capture the RF signals for the ones that it doesn't. Your existing remotes continue to work. No new receiver is required.
This is exactly what I bought from Amazon:
https://www.amazon.com/BOND-Automation-Ceiling-Fireplace-Compatible/dp/B071GVGVVH