Reddit reviews BXQINLENX Professional 8 PCS Gundam Model Tools Kit Modeler Basic Tools Craft Set Hobby Building Tools Kit for Gundam Car Model Building Repairing and Fixing(A)
We found 10 Reddit comments about BXQINLENX Professional 8 PCS Gundam Model Tools Kit Modeler Basic Tools Craft Set Hobby Building Tools Kit for Gundam Car Model Building Repairing and Fixing(A). Here are the top ones, ranked by their Reddit score.
● FUNCTION---EASY TO USE---The modeler basic tools set is suitable for a beginner and advanced modeler as well.You can use it to manufacture many toys,such as cars, robots, cartoon, buildings, airplanes and other crafts.● FULL RANGE AND COST EFFICIENT---Package include : 1 X side pliers, 2 X tweezers, 1 X manual grinding machine, 1 X Pen knife and blade, 2 X double-sided polished bar● DURABLE---The tweezers are made by stainless steel and can be used for a long time.● LIGHTWEIGHT AND PORTABLE---Packaged in a sturdy plastic box.When you use them, you will feel more convenience.You can take it to anywhere,use it in anytime.It will be a good assistant to you.● Sold by LENX---Please make sure this product is soled by LENX.If there is any question about the product,please don't hesitate to contact with us.Looking forward to your masterpiece!!!And also you can share your works on this page.
From someone who has never put together a miniature model before KDM, it wasn't that bad actually. Some models are a pain in the ass due to how small the pieces are, and fitting into your fingers.
Most of the models are pretty straightforward. You can use vibrant lantern (http://vibrantlantern.com/) to find how to put together any models that the official KDM website doesn't have.
The armor kits take a little bit more in figuring out how they are supposed to go. Armor kits can make up to 4 survivors, and you can mix and match gear so it's really up to you how to decide to build them.
Also, if you aren't painting them, the stuff below is all you'll need:
Pacer Technology (Zap) Brush on Zap a Gap Adhesives, 1/4 oz
https://www.amazon.com/gp/product/B00GB0SE60/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
Pacer Technology (Zap) Zap-A-Gap Adhesives, 1/2 oz
https://www.amazon.com/gp/product/B00SXJJ2OU/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Professional 8 PCS Gundam Model Tools Kit
https://www.amazon.com/gp/product/B01GH6B3Z6/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Alvin Deluxe Professional Self-Healing Cutting Mat
https://www.amazon.com/gp/product/B0015AOIYI/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Below are links to everything on Amazon:
Crazy Ants Reel Rolling Tool Bag Pouch Professional Electricians Organizer https://www.amazon.com/dp/B00O0FN832/ref=cm_sw_r_cp_api_OtgGzb838Y9H5
BXQINLENX 8 PCS Gundam Modeler Basic Tools Craft Set For Car Model Assemble Building(A) https://www.amazon.com/dp/B01GH6B3Z6/ref=cm_sw_r_cp_api_grgGzbFBB475F
Stanley 84-096 5-Inch Needle Nose Plier https://www.amazon.com/dp/B0001IW50Y/ref=cm_sw_r_cp_api_gtgGzb2XFXKT9
StarTech.com 7-Piece Precision Screwdriver Computer Tool Kit (CTK100P) https://www.amazon.com/dp/B0001NYK16/ref=cm_sw_r_cp_api_0ugGzbMGHA2NQ
Dynamite 5 pc Metric Nut Driver Assortment https://www.amazon.com/dp/B000BQ4XPQ/ref=cm_sw_r_cp_api_rvgGzb3V9N7CK
NEEWER® Titanium Nitride TiNi Hex Driver Wrench 4 Piece Set 1.5mm/2mm/2.5mm/3.0mm https://www.amazon.com/dp/B00CP2GGBI/ref=cm_sw_r_cp_api_7WgGzb3WEWHC0
Bondhus 12592 GorillaGrip Hex Tip Fold Up Tool with ProGuard Finish, 7 Piece https://www.amazon.com/dp/B00269YAIQ/ref=cm_sw_r_cp_api_zXgGzbJZRSBR6
There are also a few assorted items in there as well, standard scissors, small little brush(for getting dirt out of the quad in a crash), extra 12v power chord for my balance charger, small wrench(for propeller nuts), a couple extra small screw drivers. In the pouches: micro fiber cloth for fpv camera lens, zip ties and Velcro tape.
I'm by no means an expert but so far I've been using Tamiya Extra Thin Cement and As a starter kit for tools I've used: https://www.amazon.com/dp/B01GH6B3Z6/ref=sr_ph_1?ie=UTF8&qid=1493146419
Its only 16 bucks for the kit.
I've done business with Plaza Japan in the past, they have a good selection and low prices; you'll pay for shipping so best or order more than just one product to take advantage of that.
​
Amazon isn't bad, just check the prices compared to other stores. I've gotten great deals, and I've seen items posted at silly prices too. If you got prime then shipping is covered, although keep in mind that lots of the low price ship kits are shipped from Japan so the free shipping takes a while. Also read the reviews, I've had a couple of sellers not ship but Amazon had my back every time.
​
As for tips for a beginner, get the right tools right off the bat, this tool kit is a good start, I like these brushes (although you might want to get an additional bigger one as well), and I use this brush cleaner. Get a paint pallet for mixing, remember some paints like Tamiya need thinner while ones like AK don't. For more on brushes watch this quick video. You'll likely want some modeling masking tape. If you'll be doing something with lots of decals like a Carrier get some Microset & Microsol plus decal/hobby scissors. You'll need some kind of filler putty, I like miliput. Later on you'll want to mess with things like washes (vallejo makes a great out of the bottle wash) simple washes can make you stuff suddenly look pro because of what it does to small details, if you're going to be doing ships with specific paint schemes look in to the AK sets they'll be 5-6 colors all as part of a theme (like Royal Navy ships).
​
Most importantly you should start with something cheap. Your first few models will be learning experiences, so play around with those cheap $10 IJN destroyer kits till you get comfortable, use it to test painting techniques, then build that $50 HMS Ark Royal kit.
Gundams are all snap-together models, so no glue/paint is explicitly required. The instructions are all in the form of pictures, so you should be able to understand them just by looking at them and matching the parts on the plastic runners and piecing the parts together.
You'll want a hobby knife and a pair of sprue cutters to free the parts from their runners; Something like This should be fine for a beginner. You just use the cutters to cut the parts off where they attach to the runners and then sand or file down the excess.
There is another sub called /r/Gunpla which is dedicated specifically to Gundam models, and they might be able to help out more.
I got this kit https://www.amazon.com/dp/B01GH6B3Z6/ref=cm_sw_r_cp_apa_eRFNzb7YRA72P
Actually i was just looking at kits and saw this kit can you tell me the quality of one vs the other?
I just got this stuff for my brother:
tools
glue
mold line scraper
I'd suggest getting some well reviewed mini brushes from Amazon as well. Make sure you clean them. Enjoy!
Hi folks,
Does anyone know what the finishing sticks are from the Amazon Gunpla Tool Kits?
https://www.amazon.com/BXQINLENX-Gundam-Modeler-Assemble-Building/dp/B01GH6B3Z6?ref_=bl_dp_s_web_16153897011
I bought this kit a little while ago, and while the rest of the tools aren't that great, I actually really, really like that combo finishing stick, but it has worn out after 2-3 kits.
Anyone know where I can get JUST that stick?
how do yall feel about beginner kits such as https://www.amazon.com/BXQINLENX-Gundam-Modeler-Assemble-Building/dp/B01GH6B3Z6/ref=pd_sbs_21_2?_encoding=UTF8&pd_rd_i=B01GH6B3Z6&pd_rd_r=2KSC5ZDH88QYZT19QKQY&pd_rd_w=Y7aiQ&pd_rd_wg=Pjz33&psc=1&refRID=2KSC5ZDH88QYZT19QKQY
also how big is the difference when panel lining red pieces with black or gray markers, those seem to be the easiest to get a hold of?