Reddit reviews Chanzon 100 pcs 2x3x4 White LED Diode Lights 234 (Square Clear Transparent DC 3V 20mA) Bright Lighting Bulb Lamps Electronics Components Indicator Light Emitting Diodes
We found 6 Reddit comments about Chanzon 100 pcs 2x3x4 White LED Diode Lights 234 (Square Clear Transparent DC 3V 20mA) Bright Lighting Bulb Lamps Electronics Components Indicator Light Emitting Diodes. Here are the top ones, ranked by their Reddit score.
Overview: Single Color White, Colour Temperature: 6000K-9000K(7000K,8000K), Luminous Intensity(Brightness): 1000-1200mcd, Wide Wide Wide Viewing Angle: 160 Degrees,Super BrightParameters : 2x3x4mm, DC 3V-3.2V Volt 20mA, Polarity (3 V) : Anode '+' (Longer Leg) | Cathode '-' (Shorter Leg), Clear Transparent Rectangle Flat Small LensShipping Weight: 0.87oz / 0.02kg, Package: Pack of 100 Pieces Leddiode(Through Hole DIP 2pins leads mini LEDs Set)Compatible with: DIY PCB Board Circuit, Arduino, Raspberry Pi, Hobby, Science Experiments, Throwies Project, Breadboard, Bulb, Bulk 3.2v 3.3v Parts ReplacementMicro 2mm x 3mm x 4mm, 2pin 2 pin Leads, Tiny Bright Light, Low Voltage & Low Power Consumption
Yessir! Chanzon 100 pcs 2x3x4 mm White LED Diode Lights (Square Rectangle Clear Transparent DC 3V 20mA) Lighting Bulb Lamps Electronics Components Light Emitt https://www.amazon.com/dp/B01C5HL0PO?ref=yo_pop_ma_swf
Also not OP, but these are ones that I got that will work with click bar switches. But like /u/angelartech said, they must be as flush as possible to the PCB for them to work.
I bought the greeen lens colored ones here https://www.amazon.com/dp/B01C5HL0PO/ref=cm_sw_r_cp_apa_uGOUzb3PT6PTV The green colored lens is rated 2.3 V and the clear one is rated 3.1 V so i ordered the clear one, and waiting for them.
The green lenses looked really pretty with kaihua golds, but the light was so faint, that yau couldnt see the green at all with the keycaps. I tried with a couple other leds (white, orange, blue lens) that i have of the same brand and they shine just ok.
Hey, thanks for asking the question, for your information, base model Diverge TM 2s do not have LEDs, when purchasing a Diverge TM 2, there is an option to add LEDs but it costs extra.
I believe that you are part of the group of people that got upgraded from Diverge TM 1 orders to Diverge TM 2 right? In this case, your order was upgraded to the Diverge TM 2 without LEDs. (I think that is fair, the base model Diverge TM 2 already costs more for me to manufacture than the Diverge TM 1 and should cost extra but the upgrade was free)
For your information, if you wish to add your own LEDs at a later date, then you could look for "2x3x4 box type" LEDs, and "0805 resistors" or "1/8w resistors" for what you need.
Below is an example shopping list of stuff from amazon to get white backlights set up:
I actually haven't figured out which specific LEDs to get, I've only narrowed down which profile to get (went with 2x3x4 as they have more uniform lighting than 3 mm diamater ones). I'm open to any suggestions if you have any, otherwise I was going to get whatever's readily available like this.
Yep, I soldered the LEDs myself. I used the Chanzon Rectangular 2x3x4mm LEDs (recommended by I:C) here which are available from Amazon or AliExpress.