Reddit reviews Fluke Networks MS2-KIT MicroScanner2 Copper Cable Verifier Kit, Troubleshoots RJ11, RJ45, Coax, Tests 10/100/1000Base-T, and Voip, Includes IntelliTone Pro 200 & Remote ID Kit
We found 7 Reddit comments about Fluke Networks MS2-KIT MicroScanner2 Copper Cable Verifier Kit, Troubleshoots RJ11, RJ45, Coax, Tests 10/100/1000Base-T, and Voip, Includes IntelliTone Pro 200 & Remote ID Kit. Here are the top ones, ranked by their Reddit score.
Copper cable verifier kit for testing voice/data/video with integrated RJ11, RJ45, and coax cable, test ports support low voltage testing with no need for adapters, ensures high quality installations and expedites cable problem resolution in active network environmentsIncludes MicroScanner2 cable verifier with detachable wire map adapter, IntelliTone 200 Digital Probe, patch cords, remote IDs, alligator clips, user guide, (2) AA and (1) 9V alkaline battery, accessory pouch, duffel bag, 1 year warrantyOversized backlit LCD screen displays clear results in bright light or complete dark with intuititive icons, shows 4 test modes at once: Graphical wire map, pair lengths, distance to fault with TDR, cable ID, and far end device, detects 10/100/1000 Ethernet, POTS, and PoECable tests include length (460 meter or 1500 feet with resolution to 0.3 meter or 1 foot), wire map to TIA 568A/B standards, remote ID locators. Coax F connector for 75 Ω, 50 Ω, 93 Ω cables, PoE Detection: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices to rule out power as source of problemsRugged housing with integrated rubber easy grip holster and magnetic strap, locates virtually any cable or wire pair with IntelliTone digital and analog toning
I have tested several tools for my job and now i am using this from Fluke : https://www.amazon.com/dp/B000QJ6S06?ref=emc_b_5_i
Believe it or not there were several times that i couldn't be sure if the cable was the right one and i was using this $5 buzzer to be 100% sure!
Flukes are the gold standard- he just linked you to an ancient model. A simple model like this one is what you want. I not only tests the cable (including 10/100/1000 speeds), it also comes with a toner to trace a cable in your infrastructure as well as the ability to handle PoE and POTS (Plain Old Telephone Service). There are definitely fancier models, but this one is adequate for what you listed.
The fiber testers are much more expensive, though they are fantastic. At the very least, you could afford a visual fault indicator which uses an incredibly bright laser that you can easily see with the naked eye at the termination in the cable (even over long distances- we routinely use them at 2000+ feet for our infrastructure testing).
For bigger shops with more runs, like ours, a visual inspection kit like this one is indispensable for checking your terminations and troubleshooting.
Your budget is too low for it, but this guy is what we normally use in conjunction with the visual inspection kit. There are cheaper fiber testers out there, but they tend to cost a lot more than the copper one I linked. If you absolutely need a full range fiber and copper tester, one like this should work. I'm not sure if that model comes with a remote end unit, but that would be worth getting as well.
All of the higher end testers can output your results as a report via the Fluke software on workstations.
The cheapest way would be connect a device to the other end that you can monitor remotely and unplug them one at a time until the device goes offline. Like a computer, router or pretty much anything that puts out a signal while connected to internet.
I’m sure they make tools like a coax explorer for Ethernet that you could do the same with but they’d cost quite a bit more than free.
If you really want the tool for the job tho.
Fluke Networks MS2-KIT Network Cable Tester Kit with Probe https://www.amazon.com/dp/B000QJ6S06/ref=cm_sw_r_cp_api_od1MAb8VDFZ9X
I have that one and the MS2-100 and they are great. They are so reliable and better than analog toners.
Just invest the money...it will last forever.
And here are the best two testers I could find:
http://www.amazon.com/Fluke-Networks-MS2-KIT-MicroScanner2-Professional/dp/B000QJ6S06/ref=pd_rhf_dp_s_cp_5
http://www.amazon.com/Fluke-Networks-MT-8200-60A-IntelliTone-Pro/dp/B0001FSCVI/ref=pd_bxgy_hi_img_z
I've been eying this.. Still so much out of my price range. However I'm hoping to make some side money and sell some old computers, etc to make enough to buy it.
Leatherman - Charge TTI
Fluke Networks MS2-KIT
JackRapid Punchdown Tool
Fluke Networks 11293000 Pro-Tool Kit IS60 with Punch Down Tool or similiar
a set of crimpers (can't find a good set at the moment)
network ends, cable, wall plates etc.