Reddit reviews Heavy Duty Weather Proof Multi Purpose Enclosure Amphenol Broadband 9 x 9 x 4 (Interior approx. 8 x 8 x 3-1/2)
We found 4 Reddit comments about Heavy Duty Weather Proof Multi Purpose Enclosure Amphenol Broadband 9 x 9 x 4 (Interior approx. 8 x 8 x 3-1/2). Here are the top ones, ranked by their Reddit score.
Cable retention slots allow techs to work outside the box. Quick Mount Rail allows any True Flex component to snap in without screws. Heavy duty constructions stands up to the elements year after year. Enclosure measures 9 inches wide by 9 inches tall by 4 inches deep.
It's far from their intended use case, and may require a bit of "warranty voiding" to get an access point mounted inside, but a non-metallic alarm panel enclosure may meet your needs well. They're generally designed to be tamper-resistant and lockable, and usually are large enough to fit an AP inside.
Downside though is that completely encasing an AP will likely impact the signal a bit. I'm not sure how much, but if it's plastic I don't imagine it'd be that bad. I'm definitely not an expert on RF signal degradation though.
https://www.amazon.com/Arlington-EB1212-1-Electronic-Equipment-Non-Metallic/dp/B00AAU5D6Q/ref=cm_cr_arp_d_product_top?ie=UTF8
https://www.amazon.com/Extreme-Broadband-Weather-Enclosure-Interior/dp/B01N4FSKZM/ref=sr_1_7?ie=UTF8&qid=1549087351&sr=8-7&keywords=alarm+panel+box
As promised, here are my sourcing links:
​
​
The rest of it is pretty standard stuff, Raspberry pi, misc hardware from any local hardware store etc...
I got you. I have a similar setup. So here’s what you need.
Wilson Electronics Wideband Directional Antenna 700-2700 MHz, 50 Ohm (314411) https://www.amazon.com/dp/B00J14YEHQ/
Buy two of these. Place on a pole as high as you can get it. Mount them 45° and -45°. That’s how LTE is polarized.
Example: https://www.solwise.co.uk/images/images3g/4g-ren6702709-lpda-5.png
Heavy Duty Weather Proof Multi... https://www.amazon.com/dp/B01N4FSKZM
Put the M1 in this on the pole too.
Use this to send power up the Outdoor cat6 cable:
TP-LINK TL-PoE150S PoE Injector Adapter, IEEE 802.3af Compliant, up to 100 Meters (325 Feet) https://www.amazon.com/dp/B001PS9E5I/
And this to pull the power out of the Cat6
ANVISION Gigabit PoE Splitter,... https://www.amazon.com/dp/B07PW9FJNT
Then convert the mini to USB C:
ARKTEK USB-C Adapter, USB Type C (Male) to Micro USB (Female) Syncing Data Transfer and Charging Converter for Chromebook Galaxy S10 Note 9, Pixel 3 and More (Black/White, Pack of 4) https://www.amazon.com/dp/B01I0ZAJXO/
Ok.
That’ll get you where you want. Don’t get a booster or anything else. It’ll make your signal slower.
Put the whole thing on the pole because if you leave it inside you’ll get a lot of signal loss along those long cables.
———
Now the M1 is a 4x4 MIMO which claims it can get you gigabit speeds. But once you plug in the external antennas you’ll get 2x2 MIMO. the only way to solve this is a bit hacky.
You’ll need this:
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F183651187710
(This isn’t me but it’s the only guy I’ve seen selling these wires)
Then you’ll need two of these:
weBoost Outdoor Directional Yagi Antenna with N Female Connector 301111 for 700/800/900 MHz Band https://www.amazon.com/dp/B0006H4FVM/
These will be you MAIN antennas. While the other covered ones will be your additional.
To explain. LTE towers send out 45° 800mhz, -45° 800mhz, 45° 2700 MHz, and -45° 2700 MHz You need an antenna for each. This will get you the fastest speed and best reliability. But this is hacky. I haven’t done this, YET. I’ve just planned it all out. I’m using a LB1211 with two covered yagis. I’ve gotten up to 70mbps with just that 2x2 setup (in a valley).
I plan on getting an M1 with 4 antennas soon, but right now my pole situation sucks. I need to figure out a better solution first. Then I’ll be comfortable spending that much more money. But just getting those two covered yagis and putting you M1 up until the pole, you’ll get a much better issue
If you are installing it in a sheltered location, and don't live right next to the ocean you should be OK with just slapping it up there.
If you want some more peace of mind, an equipment enclosure would keep it nice and dry with minimal signal degredation;
https://www.amazon.com/Weather-Enclosure-Amphenol-Broadband-Interior/dp/B01N4FSKZM/ref=pd_lpo_sbs_469_t_1?_encoding=UTF8&psc=1&refRID=BHSNB6MV7F8ZND4H235A
​
Or get a Flex HD since it is very similar to the NanoHD but in a slightly different form factor and rated for outdoor indirect exposure. If it is exposed to direct rain I think I would use an equipment enclosure