Reddit reviews Moog K3174 Stabilizer Bar Link Kit
We found 2 Reddit comments about Moog K3174 Stabilizer Bar Link Kit. Here are the top ones, ranked by their Reddit score.
Improves upon OE designsQuiet, dependable operationProvides like-new steering, ease of installation and longer lifeIncorporates proven design and engineering featuresFits 1984 - 1991 Jeep vehiclesRubber bushingsIncludes linkFits an 8.25" sway bar linkKit comes with washers and bolts for easy installation
Heres everything I bought for my lift, the swaybar end links are of course optional, so are the bumpstops: https://www.amazon.com/gp/product/B019HXJFBA/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B01K5FP2SE/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B00B2AF0MU/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B00B2AFKP2/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B001GH1OCO/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B000C57XJY/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Here's a list of the parts you'll need /u/RebornSpartan . I did pretty much the same thing last year.
Also, if you replace one wheel bearing I'd suggest knocking out the other one while you're at it. That also gives you the chance to check the axle shaft u-joints while you're at it.
2x Timken HA597449 Axle Bearing and Hub Assembly - $150
You will also need a 36mm socket specific for the nut on the axle shaft. I bought this one from Amazon when I ordered the wheel bearings: TEKTON 4936 1/2-Inch Drive by 36 mm Deep Impact Socket, 6-Point - $14.
Something to be aware of (paranoia at its finest) is the possibility that your hub bolts may be rusted all to hell and need replaced. Or in case you want to replace them "just because". You can get them from Quadratec @ $4/ea and you will need a total of 3 for each side. Crown Automotive 34201535 Front Knuckle To Hub Bolt
Here are the Moog part #s for the ZJ tie rod upgrade:
1x Moog DS1312 ZJ Tie Rod End - $54
1x Moog ES3096L XJ/ZJ Tie Rod End - $26
You can generally re-use the adjusting sleeve that's already on the components you're going to replace, but in case you want/need a new adjusting sleeve it's only an additional $15.
1x Moog ES2079S XJ/ZJ Tie Rod End Adjusting Sleeve - $15
While you're down there mucking about with the steering, you should check the drag link and the track bar as well.
If you need/want to replace the drag link assembly, here are the part #s you'll need. Again, you can generally get away with re-using the adjusting sleeve so that will save you $15 if you do.
1x Moog DS1238 Tie Rod End aka Drag Link - $60
1x Moog ES3096L XJ/ZJ Tie Rod End - $26
1x Moog ES2079S XJ/ZJ Tie Rod End Adjusting Sleeve - $15
For the track bar:
1x Moog DS1235 XJ Track Bar - $59
Now, on to the sway bar links. If the links themselves are still good, all you need to do is replace the bushings.
2x Moog K3150 Sway Bar Link Repair Kit - $17
If your links are crap (usually the top bolt is rusted all to hell, or people don't want to screw with pressing out the old bushings) you can get two of these kits to just do a straight replacement.
2x Moog K3174 Stabilizer Bar Link Kit - $38
And don't forget to replace the mounting bushings for the sway bar while you're at it, also.
1x Moog K3171 Sway Bar Bushing Kit - $10