Reddit reviews OPT7 FluxBeam LED Headlight Single Bulb for Motorcycle - H4 w/Clear ARC-LENS Beam Bulbs - 65w 5,500Lm 6K Cool White CREE - 2 Yr Warranty
We found 5 Reddit comments about OPT7 FluxBeam LED Headlight Single Bulb for Motorcycle - H4 w/Clear ARC-LENS Beam Bulbs - 65w 5,500Lm 6K Cool White CREE - 2 Yr Warranty. Here are the top ones, ranked by their Reddit score.
A 360° Approach on Light Output- FluxBeam v.2 doesn’t place it’s focus ONLY on lumens/brightness, but on ALL 3 components of light output that determine the quality of light and lifespan. LUX- LUMENS- CRI.2 Colors available 5000K and 6000K- OEM 5K and Cool White 6K @ 5,500Lms per LED bulb without dark spots! FluxBeam LED v.2 is the only light that uses the all new ARC-LENZ OPT7070 automotive specific LED Chipset and Arc-Beam v.2 technology to ensure an ideal beam pattern*ALL new Roden LED Driver - redesigned inside and out to take advantage of the ARC-LENZ LED Bulb Chipset. The deep crafted red aluminum ridges ensure the new LED Driver maintains optimal operating temperatures. A reminder than nearly half of LED Headlight failures come from everything but the LED Diode themselves.Plug-N-Play: FluxBeam LED headlights are made to replace nearly all stock housing and sockets. Before ordering, check your vehicle owner's manual to confirm your needed bulb size for your desired application (low beam, high beam, fog)Every Other Reason- Does your Conversion Kit use Fortune 500 manufacturing partners? A TRUE 2 Year Warranty- paired with 10 years of award-winning service? A 60 Day Money Back Guarantee? OPT7 DOES
From my Google doc:
I use this LED light:
https://www.amazon.com/gp/product/B00WVJR0D8/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
It works very well and it’s super bright. If you do change out your bulb, switch the two corner running lights to LED as well. I used these:
https://www.amazon.com/gp/product/B00JRE38EA/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
Installation was a breeze. You can find install videos on YouTube.
As for swapping the headlight bulb out I’ve used these and the beam is just the same as the halogen it replaced just whiter and a longer throw. OPT7 Fluxbeam LED Headlight Single Bulb for Motorcycle - H4 9003-6000K Cool White - 40w 3,500Lm CREE - 2 Yr Warranty https://www.amazon.com/dp/B00WVJR0D8/ref=cm_sw_r_cp_tai_LnCMBbYDWH4TC
I’ve had no issues with people flashing me or any other issues. Two things are important. 1. This bulb comes apart to install it, this is not immediately evident, but a close inspection will show the bulb at two parts. The “holding ring - like the H4 has ) twists and comes off the the bulb assembly toward the front. You install this first, then your rubber protective boot and then the light assembly goes in and turns to lock. Now item 2. Is the only issue and fault with the bulb. When you insert and 1/2 turn, you can go beyond having the bulb exactly vertical in the assembly which will skew your lighting all out of spec, it will glare and be a non uniform pattern. The fix. Mark the fan assembly with a vertical line perpendicular to the actual LED chips. Now you know where vertical is and can install the assembly into the boot and the holder. Mine was about 5 degrees off if I just pushed in and turned till it stopper. I put mine vertical and then put a 1/4 dot of silicone between the holder and the bulb. Keeps it from moving, light is perfect. These bulbs have a fan assembly, it’s completely waterproof and I’ve submerged my DS in a few creeks with no failure of the light the fan just stays running under water till you turn off the ignition.
These work pretty well in my stock housings. I have (h4 version ) installed in three bikes. OPT7 Motorcycle LED Headlight Kit w/ Arc-Beam Bulb - H4 9003 - 6000K Cool White - 40w 3,500Lm CREE - 2 Yr Warranty https://www.amazon.com/dp/B00WVJR0D8/ref=cm_sw_r_cp_tai_2GGhzb9DW1R3Z
The instructions are real not clear, but the bulb separates with a twist from the mounting plate. Install the metal part, then your headlight bulb boot then insert the bulb assembly and twist to lock.
Make sure the bulb is positioned correctly with the leds pointing perfectly horizontal with the housing, otherwise you'll get a weird pattern high on one side - low on the other.
I actually just put these on my sportster last night: OPT7 Motorcycle LED Headlight Kit w/ Arc-Beam (https://www.amazon.com/dp/B00WVJR0D8/ref=cm_sw_r_other_awd_6SH3wb4PP998B)
The difference is astounding. The fitment can be a little tricky but I was able to fit everything in the original housing.
Also thinking about adding a light bar underneath from (http://trackerdie.myshopify.com/products/7in-36-watt-led-light-bar) but that'll be a little later.