Reddit reviews Precision Brand M-S Series Micro Seal, Miniature All Stainless Worm Gear Hose Clamp
We found 2 Reddit comments about Precision Brand M-S Series Micro Seal, Miniature All Stainless Worm Gear Hose Clamp. Here are the top ones, ranked by their Reddit score.
Series 300 stainless steel band helps provide resistance to corrosion in marine environmentsStainless steel screw resists corrosionMiniature size for small hoses installed in confined spacesBand width of 5/16” better fits small hoses than larger widths
You can use a hose clamp like this to attach bottle cages wherever they fit. Use a couple of layers of cut pieces of inner tube to protect the frame and stop slippage. It's very cheap and works well, just make sure to check what size you need.
Or you could get a framebag and chuck a camelback bladder/bottle in it.
I wouldn't want to run a waterbottle on the back of the saddle, just seems like it would get annoying and possibly rattle out. I'd only carry anything on the forks if the front triangle of the bike was already occupied - you want as much of the weight as closer to possible to the centre of gravity.
> (you'd have to hold the pedal AND the switch on the drill)
I thought somebody who'd ask that question would already know you hold down the trigger with a worm gear hose clamp, so I didn't mention it. Since, apparently, that isn't obvious: go to you local hardware store and buy a worm gear hose clamp of the proper diameter to clamp down the trigger on your drill before hooking it up to a foot switch.
>What I'm looking for is something that would allow you to vary the speed via the foot pedal.
Well, fine. Here you go. You're on your own determining if this is the proper control for your particular device: https://www.widgetsupply.com/product/SDD3-975PS.html?gclid=CjwKEAjwoLfHBRD_jLW93remyAQSJABIygGpXMeSAGXv7Cqra5OGNn1JbfCLv1LYznkEG-Q7aNLSsBoCjcPw_wcB