Reddit reviews Reliable Hardware Company RH-4-SRR-A Rack Rail

If you're broke and moderately handy, these are a cheap way to make your own rack or generally mount audio things to other things.

Sounds exciting! I have mine in a basement with good air and a well regulated temp, but spaces like that get dusty.

I would make sure to fit the air intakes of everything you put up there though with a cut up furnace filter. It will catch a lot of debris from being vaccumed up.

from my rack, I made it out of wood that i treated and stained with rack rails like this:
https://www.amazon.com/Reliable-Hardware-Company-RH-4-SRR-Space/dp/B00JQYUIJ4/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1523396184&sr=1-3&keywords=rack+rails

That way to expand, i just had to rebuild it (which was made of wood and screws.

> How should I finish the ethernet cables?

Like another person said, use keystones. Don't use toolless as they are pretty crappy but just get a cheap punchdown tool and keystones for each room.
I would personally use a patch panel where the cables are going to be run to, but it wouldn't be necessary if you're only going to be running them how you initially explained.

> Can there be any conflict between the wifi of my router and the wifi of the APs?

There can, but they should be able to figure it out on their own. That said, if you're using APs (or WAPs as I call them at work, for Wireless Access Point, sorry about the change in terminology), you should just use a wired router instead of one with Wifi. No reason to add another component and interface to your situation.

> Good to know. From what I read, the usual setup is to have Ubiquiti controller installer on a computer running 24/7. So this is only for logging stats, is that right?

Pretty much. I don't think many people are running an actual computer 24/7 just for the software but do it if they have a server running 24/7 already, or just put it on a raspberry pi instead if they really need it.

> So all the APs get the same configuration? They are all configured with the same settings? No need to configure them differently?


> And if I set the SSID and the security for the APs to be the same as the one from my router wifi, everything will appear as one and only one network and there will be no waiting time from the time when I'm connected to one AP and get connected to another one while moving? Also, how will that switch from one AP to the other be done? Will it be automatic or no? Will it be the APs that will determine when to change one device from one AP to the other or the device itself that will "take de decision"?


Unless you want to do something different in a specific part of the house (i.e. guest access not everywhere) then yes. You just leave channels to auto, give every ap the same ssid, and you're devices will automatically switch freely among them. The devices make that decision, but the APs will sorta "help" determine when they should.

> What is a "WAP"? Also, if on the ceiling, I guess it should be in an open area rather than in the corner of a room? I would prefer to install them in the corner of a room in order to make them more "invisible", but I don't want to impact the wifi coverage/speed...

Sorry again, WAP is just what we call Wireless Access Points at work, because we have wired ports labeled Access Points as well. You can definitely install them on walls as well, but the devices are designed to radiate signals stronger in a specific direction. That is usually every direction but directly behind them, which means if you put it on a centrally located wall, the side of the house in front of it will have a stronger signal than the side behind it. You can place them closer to the edge of the house and be pretty good, but you might need to add an extra one to get as good of coverage.

> Do you think the new chip will be integrated in device shortly (the house will still be probably open until june...)?

No need to worry about that. The idea is to run as many cables in the walls as you'll ever need, so you can change tings like a router or APs super easily by just unplugging the old one and plugging in the new one. I don't think they will be popular enough in devices by june to be worth getting yet. probably closer to 2 years.

> A PoE switch seems nice. What is there to look for when buying one?

Definitely. There's 2 types of PoE switches: passive and active. passive switches are cheap and will damage any device that gets plugged into it that doesn't work with the same voltage. Try to stay away from these. Active switches support either 802.1af or 802.1at. Basically you want to make sure your switch and AP support the same type of active PoE. You can plug in anything to these switches without worry. Yes, you'll want to install it right next to your router and run cables to all of your rooms that way.

> Do I need to have ventilation for a PoE switch? Also, there is some that get installed into a rack, but I think this is more for a "pro/business" installation. However, does a PoE switch can be wall mounted?

Don't think of them as "pro/business" models. You seem to be building a large modern house, and having everything centralized will make your life SOOO much easier. I have a much smaller house and have a 24 port switch in my garage. You can just sit it on top of something, or you can make a mini rack, like I did. Just bought a pair of these and secured them to a plate of aluminum. It has my router, a patch panel, and my house switch installed on it, and is sitting on a shelf, although when I get the time and drive I'll mount it to the wall with some shelf arms. As for ventilation, look for the temperature rating on them. The lowest max temp I've ever seen is 40°C/104°F so should be fine in a living space, but depending on where you live might not be in an attic or garage. That said, my garage gets about 115/120°F on the hottest days and I haven't had an issue with my swtich.

>In general, is it better to run distinct ethernet cables with a RJ45 jack on each end or to buy a full spool of ethernet cable and put a RJ45 manually to each end?

Just to reiterate, you want to attach keystones at the very least to the living space side, and either the same thing or a patch panel where they are being run to. Will give you a much more professional look than a hole with cables. People will see it and not notice it, as opposed to seeing it and thinking "they have a hole in their wall already!"