Reddit reviews Rub 'n Buff Metallic Silver Leaf
We found 3 Reddit comments about Rub 'n Buff Metallic Silver Leaf. Here are the top ones, ranked by their Reddit score.
A touch of silver can be added as an accent to your home decor and crafting projects, using the easy-to apply Rub ‘n Buff Metallic Silver Leaf finish. Simply apply this product to the desired surface and buff it to an appealing luster. This product, made from imported carnauba waxes, shining metallic powders and selected pigments, can give your projects the shimmer you desire! Rub ‘n Buff can be applied by hand or with a soft cloth, and is applicable to nearly every surface.Rub 'n Buff is ideal for: restoring cherished antiques stenciling frame finishing antiquing home decor restoration craft projectsSilver Leaf Rub 'n Buff is a bright silver wax-metallic finish that is perfect for antiquing, stenciling and other craft projects.It's so easy to apply. Just rub onto any surface with finger or soft cloth, then buff to a beautiful luster. Rub 'n Buff is ideal for: restoring cherished antiques, stenciling, frame finishing, antiquing, home decor, restoration, crafts projects
Alright i didn't really take any good photos of my work flow so ill do my best to put it in writing for you.
So Before I assembled any of the pieces they all got sanded in 120, 320, and 400 grit sandpaper. Then I joined all the blade pieces together with 3DGloop and filled as many of the joint cracks I could with Acryl Spot Putty. Then it was another pass with 320, and 400 Grit paper before the Blade got a coat with Filler Primer as for the handle I did the same sanding process for what I could but using a little 3DGloop and its included brush you can use it in light amounts as smoothing agent as well which helps a ton for the hard to reach areas on the handle. Then I joined all the parts together with 3DGloop, and applied more spot putty and sanded again. I gave the whole thing a few more coats of filler primer before going for color. I started color with gold hit those 3 spots, and after they dried I masked them off and hit the handle with purple. Once that dried i masked the handle and hit the blade with silver. For the "Dirt" in the cracks and recesses and the handle trim I used brown and light blue acrylic paint. I also used a little bit of Rub N Buff to give the blade a bit more of a shine. Once i did all that I shot it with come clear coat to lock it all in. Wow that was mouthful hopefully that helps you.
You can try this stuff. Not sure how it holds up on exterior surfaces but I had good luck with it on interiors.
https://www.amazon.com/Rub-Buff-Metallic-Silver-Leaf/dp/B013PYR4WO/ref=sr_1_4?ie=UTF8&qid=1493060266&sr=8-4&keywords=rub+and+buff
What kind of finish are you going for? If you want a glossy finish you will need to use a primer and multiple sessions of wet-sanding and re-priming where needed.
This Han Solo Blaster was my first experience with sanding/priming/painting. I didn't want it glossy smooth, so it was a good first project.
This is primed with Rustoleum filler primer and dry-sanded with 800-grit paper. Then airbrushed with acrylic paints. I added silver Rub N' Buff on top of the paint to create the wear effect. Finally I sprayed with rattle-can matte lacquer.