Reddit reviews Wire Tracker,RJ11 RJ45 Line Finder Cable Tester for Network LAN Ethernet Cable Collation, Phone Telephone Line Test Wire Tracer Cable Tracker
We found 6 Reddit comments about Wire Tracker,RJ11 RJ45 Line Finder Cable Tester for Network LAN Ethernet Cable Collation, Phone Telephone Line Test Wire Tracer Cable Tracker. Here are the top ones, ranked by their Reddit score.
✅PROFESSIONAL WIRE TRACKER - The line finder can quickly find the required line pairs among numerous ones. It's adaptable to RJ45 terminal & RJ11 terminal and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity (max currents:10mA- 30mA, and max voltage is 10V ). Besides, we offer two 9V laminated battery, which are included in the packaging of this item. Low battery indication with bright white LED flash light, included two 9V batteries.✅VERIFY LAN CABLE CONDITON - Plug one side of the cable into the emitter and the other side into the receiver, it can trace cable assignment and cable state (2-wire), also can be used test physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection. It can take place of cable tester.✅TELEPHONE LINE TEST - We only need the emitter to test the status of working of telephone lines, such as judging TIP or PING line and judging whether the telephone line is idle, ringing or off-hook. Rapidly find the target wire from among plenty of telephone wires, network wires, and all types of connected operating Ethernet switch /Router/PC.✅ADDIDITIONAL EARPHONE - In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered.✅PACKAGE CONTENT - 1 x Wire Tracker Emitter, 1 x Wire Tracker Receiver, 1x RJ45 Adapter , 1 x RJ11 Adapter，1x Earphone，1 x Alligator Clip Adapter，1 x Toolkit，1 x User Manual，2 x 9V Battery.
You use something like this:
https://www.amazon.com/Tracker-Network-Ethernet-Collation-Telephone/dp/B06Y5K1W2B
Hook the tone generator to one end of the wire and the tone will play at the probe when you touch the other end. It won't let you trace the path through the walls, but will let you match the connected cable ends.
This tool Will be very helpfull https://www.amazon.com/Tracker-Network-Ethernet-Collation-Telephone/dp/B06Y5K1W2B
Find the jack that represents it in the basement, then plug that into your switch/router.
One of these will help
The last few sets I've bought in the last decade have a switch for "automatic" which show you which pair on the LEDs on the head unit which are active.
The latest one I bought was similar to this- https://www.amazon.com/Tracker-Network-Ethernet-Collation-Telephone/dp/B06Y5K1W2B/ - but not quite. I'll try to dig it out, but I haven't found it since i moved.
If you have ports around your house, I would start by buying a cable tracer and tester kit like this.
You appear to have an OnQ 1x12 telecom system in place in that cabinet which is for phones only and an OnQ network interface panel. So the OnQ 1x12 part isn't useful for you, but you could use the OnQ network interface part and a switch to make this work. You will need a 110 punch down tool will have to do some rewiring though.
Edit: changed comment after noticing it was an OnQ system.
heres the chinese-version of the tool a pro would use:
https://www.amazon.com/Tracker-Network-Ethernet-Collation-Telephone/dp/B06Y5K1W2B/