Best figure model kits according to redditors
We found 1,378 Reddit comments discussing the best figure model kits. We ranked the 660 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 1,378 Reddit comments discussing the best figure model kits. We ranked the 660 resulting products by number of redditors who mentioned them. Here are the top 20.
A gunpla-styled Titan would likely need to be as large as the Neo-Zeong, which is still cheaper than actual Titans lol:
https://www.amazon.com/Bandai-Hobby-Zeong-Gundam-Unicorn/dp/B00KCHRSJM
Oh yeah, it's certainly available
https://www.amazon.ca/BANDAI-NZ-999-Zeong-Mobile-Gundam/dp/B00KCHRSJM
collecting robot action figures. Cheapest way to get into it is buying kits you put together yourself, most of which are models from the Gundam sci-fi universe. There are a lot of factors that go into collecting including articulation, color accuracy, stability, materials, and price point, but that's not terribly relevant in the beginning!
if you want to try it out, all you need is a pair of wire cutters or an xacto knife! I'd recommend the high grade Gundam Barbatos or the high grade Burning Gundam. High grade means smallish and easy to put together in an afternoon, so for less than the cost of snacks and a movie you can put together your own little shelf buddy.
Your best bet is to delete this and post it again on r/Gunpla. They have an incredibly friendly community and they'd love to help you choose a good model to start with, as well as give you some recommendations on beginner tools.
For a more immediate answerm there are three MG versions of the Wing The TV version, the EW Version, the EW Zero Version, and the Proto Zero. The Wing Zero EW is an older kit, but does have the angel-style wings if you're looking for those, and my personal preference is the Wing EW.
Also, while there's certainly nothing wrong with starting with an MG, I highly recommend with either the HG Wing, or the HG Wing Zero. They're both really modern HG's that look great out of the box, and are cheaper too.
At the end of the day, you should definitely check out r/Gunpla for any further questions, or even just to check out some builds you're interested in.
MG RX-78 Origin ticks most of those boxes. It's a modern kit of the oldest gundam. (despite the Amazon photos, the kit is in full color. Next to no paint needed)
Not terribly expensive, not overly complicated, iconic, articulate, etc. Good kit to get back into the hobby with.
If you want to just blow him away, Sazabi Ver Ka always works.
HG Gouf Custom if a fan favorite kit and is only $20. The gun and shield unit is really fun to build and it's not too hard for new builders. My choice from a more modern series (if that matters) would be the 00 Raiser with GN Sword III because it's fun to build, has a neat weapon, and the backpack and outer wings turn into a little separate jet which is neat.
The HG Age 1 Normal is just in your budget and is considered to have one of the best articulation. It's a good kit for beginners.
I build Gunpla, non-Bandi plamo, GW plastic, and FW resin. Simply put, Bandai's offerings, both in Gunpla and plamo, have Forgeworld details (without the occasional Forgeworld warping or bad pulls), Dark Vengeance (snapfit) assembly, largely precolored parts, poseability, and sane pricing.
I mean, really. this kit and this one both cost the same amount of money (in the US, $85). But one kit is 2 runners of gray plastic, and produces a static model (unless you magnetize, in which case it'll be mostly static). The other kit is 31 runners of parts in color, with poseability. Oh, and Bandai can offer it at this price, and still pay royalties to Sunrise.
1/144 are even less money, and you can choose between HG (focused on external detail) and RG (internal and external detail) kits.
It is expensive, it is also bigger then my 3 year old.
This is the regular kit, as you can see it is also not cheap.
Not to my knowledge but they do make plastic model kits. At the end of the day it's all the same thing. They use similar materials and similar processes to make a similar product. Banpresto, Tamiya, Testors, GW all make plastic model kits. Sure, in GW's case the models are used differently but that doesn't matter from a manufacturing standpoint. Their shit is over priced. When Banpresto can sell me a model that has far more parts and is far larger for less money, you know GW is fucking you.
If they still made their figures out of pewter that would be different but it's the same shit as anyone else and Banpresto has colored parts that are more accurate with detail and require less cleanup before assembly. Like I said, they have likely the most advanced model kits on the market.
Take their real grade gunpla kits for example. They have an extreme parts count, a great deal of poseability and detail and you can buy them for $20 online. Physically they are around the size of the vehicle kits GW puts out but a fraction of the cost.
I'm gonna assume that you ONLY have that $28 and can't purchase the $35 needed for free shipping, so I'll go with a HG kit.
Fenice Rinascita most of the sellers are in Japan and might take forever to get here, but there's one I see from Canada that JUST fits your budget.
Build Burning Gundam Just makes your budget buying from Amazon with Standard Shipping.
Age-FX For this one You'd have to buy from Japan, but I think it's a good kit and an underrated suit because it's from AGE.
Star Build Strike Plavsky Wing Not technically a SEED kit. lol
Age-1 Normal I've heard nothing but good things about this kit, and it's REALLY cheap.
And Lastly I'll suggest the 0 Gundam. This version isn't very colorful, but it comes with some cool wing effect parts. But there's a colored version that's cheaper that doesn't come with the wings here.
AGE-1 Normal on Sale for 37$!
http://www.amazon.com/Bandai-Hobby-Gundam-Normal-100-Master/dp/B006F9CFUI/ref=pd_sim_t_23
AGE-1 Titus on sale for 38$!
http://www.amazon.com/Bandai-Hobby-Gundam-Age-1-100-Master/dp/B006Q4SQQ4/ref=pd_sim_t_15
REAL GRADE FREEDOM AND JUSTICE ON SALE!!!!
http://www.amazon.com/Bandai-Hobby-Justice-Gundam-144-Real/dp/B007ZB06V0/ref=pd_sim_t_27
http://www.amazon.com/Bandai-Freedom-Gundam-Real-Grade/dp/B005JABU82/ref=pd_sim_t_1
OK, I'm in socal, there is a ton of gunpla shops near me. I believe there are some around the Bay Area but don't know about Sac.
Here is the MG Heavy Arms at a store I frequent, I never had to have them ship to me because they are local but I like them.
MG Heavy Arms EW
This was released I believe in 2011, they did a re-release of all the Gundam Wing kits which Heavy Arms is from.
Here it is again on Amazon
If you have Prime you can get it shipped for free and its pretty much identical price
Sure, maybe check out this one: Bandai Hobby Wing Gundam Zero Version EW 1/100 - Master Grade https://www.amazon.com/dp/B0004EAFWK/ref=cm_sw_r_cp_api_i_6KmCCb1YYNJAD
I think it would look really nice with a glossy look.
First kit I ever did was a HG Epyon. Being the dumb kid I was, I just broke the pieces off the runner and then chewed the nubs off. ....I know.
I ordered this guy as well as this little dude.
MG Epyon is next, followed by Deathscythe Hell then Tallgeese III, and of course SD versions of all.
Hi there, to answer your question, they can be posed. The glue isn't really required, it just helps some pieces stay on or together in the case of the Shadow Fox's face (the teeth on my girlfriend's came out at the slightest bump until I cemented it). No real issues on any others, but I would suggest it just in case you get a defect.
Now I do I have a few suggestions on which one would be a good starter zoid so that you're not too overwhelmed like I was. Personally I felt that the Liger Zero, Shadow Fox, and Gunsniper were really enjoyable to put together. The only issues with the lot are Shadow Fox's teeth and the Gunsniper has these hoses that are a pain to fiddle with.
Although, if you want a real challenge, I suggest the Gojulas (this one is gonna end up costing you upwards of $300 nowadays, but I assure you it is marvelous when fully assembled), Berserk Fuhrer, or the Geno Breaker (this one has an issue with a piece on the neck that looks a bit like a vent, it is really fragile if handled improperly).
Hopefully I was of help, and good luck in your purchases!
Not gonna lie I don't know the model number. I am not the biggest Gundam guy, I just like the way this one looked and it was fun to build. I will link the amazon page for it though :)
https://www.amazon.ca/Bandai-Gundam-Astray-Customize-MBF-PO2KAI/dp/B0042VJ018/ref=sr_1_1?ie=UTF8&qid=1487129988&sr=8-1&keywords=gundam+red
Here's the Amazon price tracker page for proof. I can't get this myself due to no money syndrome, but I hope you guys get this if you haven't already!
http://www.amazon.com/Bandai-Hobby-Gundam-AGE-1-Normal/dp/B0058KSCU2/ref=sr_1_1?ie=UTF8&qid=1381629672&sr=8-1&keywords=gundam+age
Its at 15 right now, and one of the better HG kits in terms of engineering and complexity.
http://www.amazon.com/Bandai-Hobby-Gundam-AGE-1-Normal/dp/B0058KSCU2
That's an amazing kit to get for a first one. Elegant build and tons of articulation
It should be fine asking here, most of us in /r/Gunpla are subbed here too anyway.
Anyway, if your Bf has never built a gundam model before he should probably start with a cheaper High Grade (or HG) model first, they are very simple and won't look that amazing but it works as an introduction.
If your Bf has built a gundam model before then you should probably get him a Master Grade (or MG) model, they tend to be leaps and bounds better than the HG models but they do require some discipline and a modest amount of experience to put together.
I should note that gundam model kits don't have english instructions, but the illustrations used in the instructions are excellent and don't really need additional text for you to follow them. It's not anything major but it might cause confusion if you don't know about it before hand.
Amazon is probably your best bet for where to buy from, you're just more certain of the support you'll get if there is a problem and the savings you might get from ebay would be marginal at best. You could potentially buy from Hobby Link Japan which will feature better base prices and has a good reputation, but they ship from Japan so the shipping cost might not be worth it sometimes.
And finally I went looking for Heavy Arms kit on Amazon already and found a HG version and a MG version which is currently on sale. You could get them both for just about $50 before shipping. This is great if your Bf has never put together a kit before, he could get used to how things are done with the HG kit, then used what he's learned on the more difficult MG kit.
I ended up going with this guy! https://www.amazon.com/gp/product/B00EOEBG2Y/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Looks good, man! If you're looking to get an HG, most of the HGBF (the kits from the Build Figther series) are really fun to build. I would highly recommend the Wing Gundam Fenice. I had a blast building that kit.
It's on Amazon for around $20. Here's the link
https://www.amazon.com/gp/product/B00GT6XLYQ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
These are quite...meh, better than wire cutters and normal side cutters, but not as good as good side cutters. That's because these are meant for children, who usually don't have high allowances, and don't do much besides cut straight off the runner. The godhand nippers that everyone uses and refer to universally as "Godhands" is the Ultimate Nipper 5.0.
Other good nippers include the Gundam Planet Nippers and Tamiya Sharp Pointed Side Cutters.
I got a question for you.
How much do you want to spend on cutters?
Some notable brands for cutters are (listed from price ascending) Xuron($10-$20), Tamiya($25-$30), Gundam Planet($35), and then Godhand($55-$??). (There might be others, but I have found these to be the most popular.)
Right now I have Gundam Planet nippers. They are the best nippers I have had so far, but I have only owned one other pair so dont take my word to heart. What ever you do don't go for a $5 pair not worth it at all. I did that and I spent more time fixing the mistakes those clippers did to my model.
Personal opinion get a pair of Tamiya Sharp Pointed Side Cutters or Gundam Planet Nippers. Here is a [comparison] (https://panzercraft.com/articles/2016-01-31-tamiya-side-cutters-vs-gundam-planet-nippers/) between the two. In all honesty though I have no been able to replicate that slow cut with my GP nippers. Another point is I have been able to get pretty close if you scratch the white part with your finger nail it almost looks like the slow cut photo.
P.S. Really though all of your clean up with the nubs is going to be with sand paper and a razor blade of some sort. I just ordered myself a OLFA Rubber Grip Utility Knife, but you can also get a OLFA Cushion Grip Knife if you want one of them.
Without knowing your boyfriend's taste in gunpla, this newly released MG 1/100 Freedom Gundam 2.0 kit is pretty popular. It has also been praised by gunpla reviewers for its quality and poseability.
This forum is great and has talented people.
Keep in mind two things about this forums popular suggestions:
1.) They love grunt suits. So don't let them bully you into a grunt suit unless that is what you want.
2.) MG Ball Ver Ka seems to be a favorite on here, don't let that influence you unless you like the ball.
My personal recommendation is the new MG Freedom Gundam 2.0
Build the suit you like!
I will be getting the 1/100th grimgerde
Chill, anti-social, likes moderate mind-fucking (but not deep into mind-fucking), and is loving, especially whenever they make a bond with someone.
MG Freedom 2.0 or the MG Wing Fenice Rinascita
Bandai Hobby MG Freedom Gundam (Ver. 2.0) "Gundam Seed 1/100 https://www.amazon.com/dp/B01BD3NJ8C/ref=cm_sw_r_cp_apa_i_BhIQCbZ8XC978
This one?
There was a fairly recent release of a High Grade Wing Gundam Zero kit, but it looks like he prefers MGs... I think there are a few variations of the Wing Gundam kit, such as the Proto Version, Wing Gundam(EW), Wing Zero(EW). or if you want to be the best friend ever there is the Perfect Grade Wing Gundam.
If he is a fan of the Gundam Wing series, it is worth considering Deathscyth, Deathscythe Hell, or Sandrock, which are other 'protagonist' mobile suits that fight sort-of along side the Wing Gundam.
There is also Epyon and Tallgeese, two 'bad guy' mobile suits from the same series.
If he is a fan of the original Gundam series, the RX-78 or a Zaku kit(there are many variations) would be good as well.
Also, be careful buying on Amazon if you want it to be delivered by the 10th (or shortly after). Quite a few of the sellers with good prices are based in Japan so it can take upwards of a month or more for the item to arrive if you buy it from them. It can be easy to miss that information if you're not paying attention.
https://www.amazon.com/Bandai-Hobby-Wing-Gundam-Version/dp/B0004EAFWK/ref=pd_lpo_21_tr_t_3?_encoding=UTF8&psc=1&refRID=Z7C2JSX8Y465QD7G8Q0X
Your love of wing is as great as mine this is a solid and beautiful rendition of the Wing Zero so I would recommend this or this
https://www.amazon.com/Bandai-GUNDAM-VER-Ka-Master-Action/dp/B00030EUTY
No, I got this one from Amazon.
1: In this kit, there is no water slide decals just regular stickers, so you do not have to worry about applying those. (P.S. When applying the stickers for the piping, they kept coming off, so I used a weak glue, you could also use a gold paint or sharpie).
​
2: I nipped all the nubs, then sliced off the excess with an exact-o knife, then sanded with 500 grit, then 1000.
The white marks are probably stress marks from when you cut the pieces from the runners. So just use sharp nippers and be gentle with cutting and you should avoid the white marks.
But im no expert, this is my first kit haha.
You should check out some Gunpla, my son had a lot of fun helping me build a few kits.
( I know its not a tank or bomber, just throwing it out there)
Fun to build, and when you're done he/you can actually pose and play with it to some degree.
[Something like this] (https://www.amazon.com/MS-06S-Chars-Zaku-Kidou-senshi-GUNDAM-Origin/dp/B00T41F4P2/ref=pd_sim_21_6?_encoding=UTF8&pd_rd_i=B00T41F4P2&pd_rd_r=9da55db7-c69f-11e8-a791-5df8b5defc43&pd_rd_w=WIQmV&pd_rd_wg=Fs9c3&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=18bb0b78-4200-49b9-ac91-f141d61a1780&pf_rd_r=CC028DDECK93R7DE51YN&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=CC028DDECK93R7DE51YN)
or this
If you are looking at kits, here are two versions of the original Gundam:
https://www.amazon.com/Bandai-Hobby-Gundam-RX-78-2-Action/dp/B00CRSXK4Q/ref=mp_s_a_1_6?keywords=rx-78-2+gundam&qid=1575079694&sprefix=rx-78-2&sr=8-6
https://www.amazon.com/Bandai-RX-78-2-Gundam-Real-Grade/dp/B003KX5OXW/ref=mp_s_a_1_2?keywords=rx-78-2+gundam&qid=1575079764&sprefix=rx-78-2&sr=8-2
The MG is larger and more complex, the HG is smaller. Both are good, detailed kits! And those are just the Gundam itself - there are lots of other kits from the original series, too! For instance, the Zaku I And Zaku II, Gouf, Gelgoog, GM, and more. If you want some more suggestions, you might try the r/gunpla subreddit, too.
Edit: You could also just look for kits labeled HGUC - that means High Grade Universal Century. High Grade is a type of model, Universal Century is sort of the “main” Gundam series - so, the original series and its sequels.
I feel like this might be a good one to start with what do you guys think
I've finally dived into the world of gunpla after my friend started getting some a couple weeks ago.
So far I've only ordered Char's Zaku II (Origin) and the RX-78. Both 1/144. This is most likely only the beginning though...
Also because I haven't watched any Gundam in a couple months I've started Gundam Wing.
I got this kit from my aunt while she was in Japan
Here's an link from Amazon
So ideally you go to a local hobby store and look at what models they have, then pick one you like and within your price range. You can start off with 1/144 scale HGs (High Scale), but I am a firm believer that if you can follow instructions, you can start at any scale and any grade. I am a sucker for kits with cool box arts (like the MG Shin Musha). Get a pair of side cutters to help with [piece from tree removal] (http://www.ghostofzeon.com/diy/assembly/removingparts.html). Obviously, shop around to get a good price. There are a wealth of useful links and threads on right hand column under "Current Events" (not sure why it is under current events...) Other model kits include [Zoids] (https://www.amazon.com/Zoids-Japanese-Kotobukiya-Model-RZ041/dp/B003UTUEVI/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1481057397&sr=1-1&keywords=zoids), Evangelion, and even [Batman] (https://www.amazon.com/SpruKits-DC-Comics-Batman-Arkham/dp/B00L5KKUR2/ref=sr_1_3?s=toys-and-games&ie=UTF8&qid=1481057500&sr=1-3&keywords=batman+model). There are also like tanks and planes and battleships...
I waited for 3 months for my Kampfer from HLJ before I just cancelled the order. Placed it on amazon and was at my house in 3 weeks, and I managed to pay $1 less than HLJ after shipping.
Sometimes you just have to be patient, other times you have to pay a slight difference for justified impatience.
------
http://www.amazon.com/Bandai-Hobby-MS-06b-Custom-Model/dp/B0041F084S
Speaking of..
I'm gonna by my first gunpla I think. Do you guys like...
Norman Custom Gouf
Thunderbolt GM
Ez 8
also one more work day til weekend hell yeah let's go, think I'm gonna finally finish Persona 4 and maybe pick up some shows that fell by the wayside.
Build THIS to remind you that they dun gouf'd when they dumped you.
I think getting a couple master grades would be better than a single perfect grade.
The "HG Sengoku Astray" is based on the Astray Red Frame, which you can get in MG here: http://www.amazon.com/Bandai-Hobby-Gundam-Model-Astray/dp/B0042VJ018/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1411528820&sr=1-1&keywords=mg+red+frame
the BF hasn't posted here in a while so maybe you can get him non-gundam related items with the leftover money, unless you know he wants to really get into the hobby
Some are typical sales, others are actually pretty good. All have available free shipping. There's still more too.
HG Gafran
HG V2
HG Strike Full package
HG Aile Strike
HG Genoace II
HG Gundam AGE 1
HG Star Build Strike
HG Ez8
HG Zedas
HG Build mkII
HG GM Custom
HG Baqto
HG Shaldoll
HG Gundam Kryios Trans-Am Mode
HG Sengoku Astray
HG Banshee
HG Gold Frame Astray
HG Gundam Airmaster
HG Zaku II
HG Red Frame Astray
HG GM III
HG GM Sniper II
HG Gundam Age 3 Orbital
HG Banshee
HG Jegan
HG Strike Freedom
HG Doven Wolf
HG Banshee Destroy mode
HG Delta Plus
RG Justice
RG Freedom
HG Miss Sazabi
RG Aile Strike
HG Burning Gundam
HG Rozen Zulu
Basically, things sold by Toy shop japan hobbyone tend to be a little cheaper with good shipping. They do have an issue with a few things that appear to not be HGs listed as HGs though.
Is there a difference in quaility?
I was thinking of getting one of these
https://www.amazon.com/Bandai-Hobby-Gundam-Astray-Action/dp/B00YGEKDLW/ref=pd_sim_21_82?_encoding=UTF8&pd_rd_i=B00YGEKDLW&pd_rd_r=WPRNSE268G5FJB4SEV0W&pd_rd_w=aGLQu&pd_rd_wg=eSvL4&psc=1&refRID=WPRNSE268G5FJB4SEV0W
https://www.amazon.com/Bandai-Freedom-Gundam-Real-Grade/dp/B005JABU82/ref=pd_sim_21_62?_encoding=UTF8&pd_rd_i=B005JABU82&pd_rd_r=WPRNSE268G5FJB4SEV0W&pd_rd_w=aGLQu&pd_rd_wg=eSvL4&psc=1&refRID=WPRNSE268G5FJB4SEV0W
https://www.amazon.com/Bandai-Hobby-Destiny-Gundam-Model/dp/B00B596VB2/ref=pd_sim_21_36?_encoding=UTF8&pd_rd_i=B00B596VB2&pd_rd_r=WPRNSE268G5FJB4SEV0W&pd_rd_w=aGLQu&pd_rd_wg=eSvL4&psc=1&refRID=WPRNSE268G5FJB4SEV0W
https://www.amazon.com/Bandai-Hobby-UNICORN-GUNDAM-Destroy/dp/B002NE795A/ref=sr_1_3?ie=UTF8&qid=1493257506&sr=8-3&keywords=gundam+unicorn
http://www.amazon.com/Bandai-Freedom-Gundam-Real-Grade/dp/B005JABU82/ref=sr_1_1?m=A2L77EE7U53NWQ&ie=UTF8&qid=1421787866&sr=8-1&keywords=gundam&pebp=1421787872393&peasin=B005JABU82
Dunno if this helps you, but <24 for an RG Freedom. Can add $11 worth of stuff on Amazon to get free shipping too.
The rail guns are definitely Freedom 2.0 though which is a 1/100 MG. Here's the RG Freedom* the rail guns don't have the stylish fins and the barrels are completely different. Also here is the RG Strike Freedom* the wings look nothing like in OP's picture where they're sleeker, sharper and better detailed than the RG's. Even the 1/100 MG Strike Freedoms* are bland and thick compared to OP's. They do however look like the Dragon Momoko 1/100 Metal Build ver Strike Freedom*
I'm just confused because I was also looking to purchase this Heavy Arms model https://www.amazon.ca/Bandai-Gundam-Heavyarms-Master-Grade/dp/B006F9CFWQ/ref=pd_sbs_21_7?_encoding=UTF8&amp;pd_rd_i=B006F9CFWQ&amp;pd_rd_r=19feedf4-ce90-11e8-8978-638753c50467&amp;pd_rd_w=LulPe&amp;pd_rd_wg=tTOYe&amp;pf_rd_i=desktop-dp-sims&amp;pf_rd_m=A3DWYIK6Y9EEQB&amp;pf_rd_p=d4c8ffae-b082-4374-b96d-0608daba52bb&amp;pf_rd_r=VK8E9WC0E8R39FN9P253&amp;pf_rd_s=desktop-dp-sims&amp;pf_rd_t=40701&amp;psc=1&amp;refRID=VK8E9WC0E8R39FN9P253
and they are only charging $60 CAD for it.
The biggest/best detailed version of the HeavyArms is simply the 1/100 MG EW version. It's actually on discount now for 39.50:
http://www.amazon.com/Bandai-Gundam-Heavyarms-Master-Grade/dp/B006F9CFWQ/ref=sr_1_2?ie=UTF8&amp;qid=1381729999&amp;sr=8-2&amp;keywords=heavy+arms
Is this the new Nu in question?
Thanks just ordered it and it will be my first ver ka. It’s like $40 off on amazon
Bandai Hobby Nu Gundam Version Ka "Char's Counterattack" 1/100 - Master Grade https://www.amazon.com/dp/B0091O17LM/ref=cm_sw_r_cp_api_i_4i1ACbD041P6Y
Just ordered this too
Bandai Hobby MG 1/100 Sinanju Stein Ver. Ka Model Kit Action Figure https://www.amazon.com/dp/B00APB7930/ref=cm_sw_r_cp_api_i_ln1ACbZY5DJ48
OP what have you done to me
Is it this one? https://www.amazon.com/Bandai-Hobby-Gundam-Version-Counterattack/dp/B0091O17LM
http://www.amazon.com/Bandai-Hobby-Gundam-Version-Counterattack/dp/B0091O17LM I'm planning on putting the LED in this guy once I get him (He's on his way) because the lit up eyes would just look great on him. I love gunpla just because the designs are cool and it's a step closer to the reality (Besides the 1:1 scale) To where I can believe that it's possible for gundam to exist in the near future. Also it gives a personal touch to you figures instead of saying "I bought it and now it's posed here" I can say "I built this and look how great it looks and how much time and effort I put into this."
Usualy Toy Shop Japan Hobbyone are great to order from if you don't mind ordering straight from Japan. They usually have the cheapest prices on Amazon, have a lot of things stocked regularly, and they ship registered SAL (has tracking info) which most others who sell from Japan don't. I have been using them for awhile now, and they ship fairly fast too considering it's from Japan. I usually get things at the two week mark here in California.
If you're looking to order straight from the states then you're going to have to pay a bit more than you would from Japan.
Hope this helped =)
Did you try Amazon?
MG Sazabi is a beast of a kit, and it's just barely under $100 on Amazon at the moment.
Any version of the Unicorn Gundam is a good pick, though I'm not sure on Prime availability.
HG Kshatriya with Prime is ~$60.
Maybe a variation on the Sinanju? Stein, Ver. Ka, or Animation Color
Usually on amazon: https://www.amazon.com/dp/B00B596V26/ref=cm_sw_r_other_apa_qhpoxbDPS9WRE OVA model of it. Or on robots 4 less: http://robot4less.com/sinanju-ova-ver-1100-mg?search=Sinanju
HLJ seems to have a pretty good price -- I would wait until they get it back in stock, if you can agree to their shipping cost. I looked on Amazon and it's $90.53 with free 2 day shipping if you have amazon prime.
HLJ's markup isn't too bad. I walked into a Yodobashi camera (a big-box electronics/hobby/home retailer like Best Buy on steroids) in Tokyo and the cheapest I've seen the Sinanju OVA version is like 5200 yen.
https://www.amazon.com/Bandai-Hobby-Gundam-RX-78-2-Action/dp/B00CRSXK4Q
https://www.amazon.com/Bandai-Hobby-Gundam-Master-Action/dp/B002BRUGI6/ref=sr_1_5?s=toys-and-games&amp;ie=UTF8&amp;qid=1485290673&amp;sr=1-5&amp;keywords=master+grade+gundams
these are just my personals as they are fairly light weight in terms of armor and weapons but they do great. i especially recommend the 3.0 but its abit fragile but it poses, articulates and has alot of movies pieces.
MG Jesta. Amazing articulation, can use an LED, Just an all around amazing grunt suit kit. Also Amazon has it on sale with Prime for only $47. This really is a no brainier :D
http://www.amazon.com/Bandai-Hobby-Jesta-Model-Kit/dp/B00B596V6W/ref=sr_1_1?ie=UTF8&amp;qid=1405955484&amp;sr=8-1&amp;keywords=mg+jesta
Or if you want a great upgrade to an old school kit, get RX-78-2 MG 3.0, $45 with prime.
http://www.amazon.com/Bandai-Hobby-Gundam-RX-78-2-Action/dp/B00CRSXK4Q/ref=sr_1_3?ie=UTF8&amp;qid=1405955604&amp;sr=8-3&amp;keywords=mg+jesta
https://www.amazon.com/Bandai-Hobby-Gundam-RX-78-2-Action/dp/B00CRSXK4Q
What's your budget? If it's high, get him the HG Neo Zeong or the Sazabi Ver. ka. If he likes to add modifications, detailing and a challenge check out the Ex-S Gundam.
It's currently at $90 on Amazon.
As for the Gatling Guns, those are a third party add on. Made by Playwright
The Sazabi on my shelf is the MG Sazabi Ver. Ka
I started without watching too. Super hooked now. Please help.
My starter suggestions:
Right now all of these are available at pretty good prices with Prime shipping from Amazon.
Happy building!
http://www.amazon.com/dp/B00FKL6E4K/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&amp;colid=2AQNVMZUNZZKG&amp;coliid=I1GNQPC1Q47BX6
I like to paint these snap together gundam models and this is one of my favorite designs.
for art!
Thanks for the contest.
ohh ok that makes more sense and is much more reasonable. I was thinking something more along the lines of this
Which models? I own this gunpla, though I don't have it with me at the moment. Gunpla are fun.
It's not the size of the 1/144 scale, its the size of the pieces - once again, its not inherently hard, it just can be tricky.
Since you're thinking of ordering RG Freedom and Strike Freedom, might I suggest HGCE Aile Strike or any of the variations.
All of these kits are based on a new mold created in 2014 (as opposed to the original HG SEED Aile Strike made 2002). They're all definitely great for beginners and are at a good price point.
I could also suggest the Build Burning, as /u/Mirarii already has, though you'd be trading play options for 2 sets of effect parts (blue and orange) - Build Burning Gundam has zero weapons (which may not be a problem for you).
***
I noticed your updated list has an Action Base 1. Those are typically for 1/100 scale.
You had the Action Base 2 before which is for 1/144 scale: you should switch it back.
didn't check
probably ~double the price though which would mean $300
and I doubt it's eligible for prime
EDIT: I checked the pricing. Cheapest is $338+free shipping. The 140 one has like $400 shipping lol
http://www.amazon.com/gp/offer-listing/B00KCHRSJM/ref=olp_page_1?ie=UTF8&amp;condition=new
Desktop View for those who are curious.
This kit looks great, and it IS great! I have it on my shelf, and it's really solid, although it doesn't stand out much.
I think Jobby's torso issue is only his kit, or at least I haven't heard about it until now- That part is incredibly solid on my kit.
You can get this kit on Amazon!
Barbatos (HG 1/144)
http://www.amazon.com/Bandai-Hobby-Orphans-Barbatos-Iron-Blooded/dp/B0129DW0WG
I did paint the sword and the red marks rather than use stickers as well as the gold accents and panel lines and did the usual matte top coat.
Almost finished with my G Self as well just need the top coat.
My first ever kit: HG Barbatos ($13)
Other easy (and cheap) kits I'd recommend:
HGUC RX-78-2 ($11)
HG Gusion ($13)
HG Graze Kai ($11)
I'd start with those, and based on the suggested products, just go from there! Really, I just like to buy kits based on what I think looks coolest. The HG kits are all pretty beginner-friendly, so it's really up to you!! Hope this helps!! And if you haven't already, subscribe to r/gunpla. It can be a fickle-bitch-of-a-sub when it comes to upvotes (which can be discouraging for new posters), but more often than not people there are more than willing to offer helpful advice. And if you have any questions, feel free to PM me. That goes for anyone reading this who's interested in possibly getting into the hobby as well. Good luck and happy building!
Both of those are great. I've heard the Gundam Planet nippers are a bit better, but I don't think it's a huge difference.
Certainly.
Tamiya side cutters: http://www.amazon.com/dp/B000J47Z4G/ref=sr_ph?ie=UTF8&amp;qid=1454130412&amp;sr=1&amp;keywords=tamiya+side+cutter
Gundam Planet Nippers: http://www.amazon.com/Gundam-Planet-Premium-Nipper-Plastic/dp/B012TMXDAU/ref=sr_1_1?s=toys-and-games&amp;ie=UTF8&amp;qid=1454130468&amp;sr=1-1&amp;keywords=gundam+planet+nipper
That was easy.
For the gundam that he likes, depending on your budget...
HG Wing Zero (~$30):
http://www.amazon.com/Bandai-Hobby-Endless-Gundam-Custom/dp/B0006N148I/ref=sr_1_3?ie=UTF8&amp;qid=1407976011
MG Wing Zero (~$50): http://www.amazon.com/dp/B0004EAFWK/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&amp;colid=26F7AFGMYHONY&amp;coliid=I19JHH8DW71UF9
PG Wing Zero (~$170):
http://www.amazon.com/Bandai-Gundam-Custom-Perfect-Grade/dp/B0009GVE7S/ref=sr_1_2?ie=UTF8&amp;qid=1407976011
Note that the PG is considered one of the worst perfect grades, I'd personally go with the Master Grade if you plan on getting him a kit rather than just tools/accessories.
I got this one https://www.amazon.com/dp/B0004EAFWK/ref=nav_timeline_asin?_encoding=UTF8&amp;psc=1
and this one https://www.amazon.com/dp/B0006N149M/ref=nav_timeline_asin?_encoding=UTF8&amp;psc=1
my two favorites 15 years ago
I reccomended cool gunplas that familiar like this
If I remember it right, ver. EW kits are Katoki's redesigns based on Endless Waltz manga, not the OVA/movie. I guess they're very close to original anime designs there.
EW movie versions usually have 'Custom' or 'Kai' suffix.
Don't be sorry man. I'm feeling just like you. It had been years since I had build the 1/144 models I got from toys r us as a kid.
it's the master grade wing zero kit. I got it from a local store but I've seen it on Amazon and Gundam USA store.
Usa Gundam store :
https://www.usagundamstore.com/products/bandai-hobby-wing-gundam-zero-version-ew-1-100-master-grade
Amazon:
https://www.amazon.com/Bandai-Hobby-Wing-Gundam-Version/dp/B0004EAFWK/ref=mp_s_a_1_1?keywords=master+grade+wing+zero&amp;qid=1575140321&amp;sr=8-1
Finally got a useful "spam" email from Amazon, here are some of the kits that appear to be on sale.
MG Sandrock - $42.64
MG Heavyarms - $42.40
MG Deathscythe Hell - $48.90
MG Wing Zero Custom - $43.66
MG Shenlong - $41.49
MG Deathscythe - $41.79
MG Wing Ver.Ka - $47.95
MG Wing - $44.29
MG Buster - $47.50
MG Nu Ver.Ka - $72.07
What YOU would like:
Dr. Who PJs!
I own both 11 & 10's PJ set, and I love it. They are fun, cozy, and also quite fashionable. In the $25-$30 range, it's not too expensive, considering it's a set. Hope you enjoy it.
As for me, a geeky toy like this gundam would be fun to build :)
No It was more closer to this:
https://www.amazon.com/Zoids-Japanese-Kotobukiya-Model-RZ041/dp/B003UTUEVI/ref=pd_bxgy_21_img_2?ie=UTF8&amp;psc=1&amp;refRID=7BT66VT66NKGZJQG6TFG
I dont know if thats was that exact model but the one i had would make noise and i think also light up. its been along time sense i last saw it, ill probably try to go find it, but yeah.
Edit: After some more googling found the exact model i had, selling on Ebay
I picked that up in Japan from the kotobukiya store.
Zoids Japanese Kotobukiya Model Kit RZ041 Liger Zero https://www.amazon.com/dp/B003UTUEVI/ref=cm_sw_r_awd_LWcDub0Z3XJXX
Are they similar (scale model kits)? Looks very detailed and fun to put together if they are.
edit: Well lookie what I found
https://www.amazon.com/Zoids-Japanese-Kotobukiya-Model-RZ041/dp/B003UTUEVI
Amazon is your best bet honestly. You'll pay more for the kit + shipping from JPN.
https://www.amazon.com/Zoids-Japanese-Kotobukiya-Model-RZ041/dp/B003UTUEVI/ref=sr_1_1?ie=UTF8&amp;qid=1504797582&amp;sr=8-1&amp;keywords=Liger+zero
Sounds good. I've been wanting to build this for the longest time >.< http://amzn.com/B003UTUEVI . now I just need to find time. I have PG unicorn to do.
I think the best kit to start of would be the original RX-78-2 (first link) the a other links are kits I believe you would admire for a starting point.
It is shipped from Japan, not sure where you live so you might need to pay custom fee or not. I live in NY and I have not paid custom fee's for my amazon purchase from Japanese sellers.
http://www.amazon.com/Gundam-RX-78-2-HGUC-144-Scale/dp/B00030EU4Y/ref=sr_1_2?ie=UTF8&amp;qid=1420120071&amp;sr=8-2&amp;keywords=gundam+hguc
http://www.amazon.com/Bandai-Hobby-MS-06b-Custom-Model/dp/B0041F084S/ref=sr_1_9?ie=UTF8&amp;qid=1420120071&amp;sr=8-9&amp;keywords=gundam+hguc
http://www.amazon.com/Gundam-RX-178-Mk-II-Titans-Scale/dp/B00030EUB2/ref=sr_1_15?ie=UTF8&amp;qid=1420120071&amp;sr=8-15&amp;keywords=gundam+hguc
https://www.amazon.com/gp/product/B0041F084S/ref=oh_aui_detailpage_o06_s00?ie=UTF8&amp;psc=1
Link to one I purchased.
The Astray is $51.49 right now if you have prime- ordinarily it's $65. I haven't built one myself, but I've never heard anything bad about it. People generally rave about its flexibility, if anything.
http://www.amazon.com/Bandai-Hobby-Gundam-Model-Astray/dp/B0042VJ018/ref=sr_1_1?ie=UTF8&amp;qid=1397012446&amp;sr=8-1&amp;keywords=mg+astray
Should be this one!
https://www.amazon.com/Bandai-Hobby-Gundam-Model-Astray/dp/B0042VJ018
Besides the price is there any difference between this and this? One of them says Kai and the other one says Revise.
Hey folks, I just recently found out about these amazing looking mecha's.
I've never built anything like this before, but I'd really like to get into it.
Also would prefer to paint my own,
been looking at this
http://www.1999.co.jp/eng/10319728
or this
http://www.amazon.com/Bandai-Hobby-Gundam-Model-Astray/dp/B0042VJ018/ref=pd_sim_21_3?ie=UTF8&amp;dpID=51BH3GVlTfL&amp;dpSrc=sims&amp;preST=_AC_UL160_SR108%2C160_&amp;refRID=0YS2GXRZNKXKJW85BV0Q
What would I have to do to paint on top of the factory paint?
The unboxing videoes I've seen online make it look really complicated, tons of small parts etc. Is this just something I need to learn through trial and error or?
Tools ?
Sorry about all the questions lol
I think these might be more of a challenge. Hope the links work. http://www.amazon.com/Bandai-Hobby-Sazabi-Version-Model/dp/B00EOEBG2Y/ref=sr_1_1?ie=UTF8&amp;qid=1449005374&amp;sr=8-1&amp;keywords=sazabi+ver+ka http://www.amazon.com/Bandai-Unicorn-Gundam-Ver-Ka-Master/dp/B005QKF860/ref=sr_1_9?ie=UTF8&amp;qid=1449005374&amp;sr=8-9&amp;keywords=sazabi+ver+ka http://www.amazon.com/Bandai-Hobby-Sengoku-Astray-Gundam/dp/B00HD4ILWK/ref=sr_1_2?ie=UTF8&amp;qid=1449005701&amp;sr=8-2&amp;keywords=Sengoku+Astray+Gundamhttp://www.amazon.com/Bandai-Hobby-Gundam-Model-Astray/dp/B0042VJ018/ref=sr_1_12?ie=UTF8&amp;qid=1449005374&amp;sr=8-12&amp;keywords=sazabi+ver+ka
lol my bad.yeah i mixed up the wing zero with the wing.i meant the mg wing gundam.
this kit:
http://www.amazon.com/Bandai-Hobby-Gundam-Action-Figure/dp/B004KJ41F2/ref=pd_sim_21_12?ie=UTF8&amp;dpID=41Bxuo7BQBL&amp;dpSrc=sims&amp;preST=_AC_UL160_SR160%2C160_&amp;refRID=1NSFW98PCKPTNXK80Y4C
So could you explain the difference between these two versions?
https://www.amazon.com/dp/B004KJ41F2/ref=cm_sw_r_other_awd_dUbHwbVC5A09C
https://www.amazon.com/dp/B00030EUTY/ref=cm_sw_r_other_awd_wXbHwbGT0ES4S
This is a second to the first post I made. Here's some examples of the specials I was talking about that pop up.
http://www.amazon.com/Bandai-Gundam-Unicorn-Banshee-Master/dp/B0071QGXHU/ref=sr_1_5?ie=UTF8&amp;qid=1380737796&amp;sr=8-5&amp;keywords=wing+gundam+ver+ka
http://www.amazon.com/XXXG-01W-Gundam-scale-Model-JAPAN/dp/B004KJ41F2/ref=sr_1_2?ie=UTF8&amp;qid=1380737796&amp;sr=8-2&amp;keywords=wing+gundam+ver+ka
http://www.amazon.com/Bandai-Gundam-Sandrock-Master-Grade/dp/B005ED3PAU/ref=pd_bxgy_t_img_y
The shipping times are AWESOME, and FREE with prime!
I'm also planning on buying one and from what I looked into, first image is an earlier version, around 2004.
bigger image You can see the year if you zoom in.
and the 2nd image is a newer version, maybe 2010+ since the other ew are at around 2012.
There's a review in amazon about it that lists the difference, not sure if this is true or accurate though.
I'll see if anyone else says anything about this as I want to know too if there are any major differences in each but that's what I know about these 2 for now.
Welcome to hobby!
First and foremost, if you've never built gunpla, or a model kit in general be sure to check the links on the side to get you started.
As for suggestions for a kit, I'd recommend getting an HG kit from your favorite series. You're bound to find your favorite suit in HG form. That being said; if you don't have one or still want suggestions I'd recommend:
All these are excellent kits in my opinion and have pretty good parts separation so they won't need a ton of panting(except the Build Strikes...their boosters need a lot of work). They're also relatively cheap. I used amazon as a general site since they have good prices generally and are even better if you have amazon prime. But you are free to find your stuff elsewhere.
As for completion times from start to finish? Its hard to say since everyone builds at different paces and touch ups can range from just panel lining + stickers, to panel lining+painting all the details instead of stickers and painting those details not covered by stickers at all + topcoat. In my case a High Grade, assuming it doesn't need a ton of painting, will run me 6-7 hours. But I'll panel line line, omit the stickers and paint everything I can, then top coat. So I'd say be prepared to take at least 3-4 hours depending on your building pace and nub management. Add 1 or 2 hours for detailing.
Hope this helps.
It's not necessarily beefy, but what about the Gran-Daddy gundam himself? RX-78-2 http://www.amazon.com/Bandai-Hobby-Gundam-RX-78-2-Action/dp/B00CRSXK4Q/ref=sr_1_2?ie=UTF8&amp;qid=1417067802&amp;sr=8-2&amp;keywords=Gundam+MG
Or try the Sandrock http://www.amazon.com/Bandai-Gundam-Sandrock-Master-Grade/dp/B005ED3PAU/ref=sr_1_24?ie=UTF8&amp;qid=1417067871&amp;sr=8-24&amp;keywords=Gundam+MG
Good luck in choosing your kit!
It would be this one if you buy from Amazon.
He is only like $35 on Amazon and is Prime also, not bad at all right now. It wasn't that fun of a kit, the shield and shoulder pieces were the only thing that was "unique." Although you have to put on mega decals lol (the shoulders in particular have a stupid amount of decal on them as you can see in my pictures lol).
both of them are RG, and I picked them up on Amazon, as there aren't any local dealers near me Freedom here, and
Exia here
The biggest part of japanese culture for me growing up (Other than cars) has been Gundams! So I submit one of my favourites: The Freedom
Wow. Actually I'm building a similar one, the 05 Freedom
http://www.amazon.com/gp/product/B005JABU82/ref=oh_o00_s00_i00_details
The 1/60 looks so much more ornate - I'd be all over that if I knew what I was doing.
Hi,
I am new to gunpla and was looking to get the heavyarms MG kit and found 2 that I think are the same but with very different prices.
https://www.usagundamstore.com/products/mg-1-100-gundam-heavyarms-ew-ver
and
https://www.amazon.com/Bandai-Gundam-Heavyarms-Master-Grade/dp/B006F9CFWQ/ref=sr_1_1?keywords=gundam+heavyarms+mg&qid=1567495174&s=toys-and-games&sr=1-1
Is it normal that there are such big price differences between the same set? or are they not the same set? usagundamstore seems a legit store ( even the reddit has it listed as a place to buy ).
This one, I'm guessing.
Yeah I have the MG EW of that same kit and my god is it totally different. Here is the Amazon page for it. I didn't pay $40 for it though, but its worth that price.
I am hoping someone can help me here, as it has been a long time since I have watched Gundam Wing. I am looking to build all the main Gundams from Wing. I found [this] (https://www.amazon.com/Bandai-Gundam-Heavyarms-Master-Grade/dp/B006F9CFWQ/ref=sr_1_1?ie=UTF8&amp;qid=1501597334&amp;sr=8-1&amp;keywords=gundam+wing+heavyarms), I am assuming that the EW means Endless Waltz, but I always remember the EW version looking like this. Am I just remembering things wrong?
Researching the best possible colors of paint for my Nu Gundam Ver. Ka..
I'd recommend the Sinanju OVA Ver. or the Nu Gundam Ver. KA because I've heard they both look really good and are fun to put together.
Personally I think the MG Nu ver Ka is an excellent kit that anyone would be excited as hell to get.
I think I'm somewhere between your taste and mechanized flaming eagle wings. This first one is especially a blend between spacecraft aesthetic and medieval armor, but it doesn't exactly fit the bill as being a realistic war machine.
http://www.amazon.com/gp/product/B00APB7930?colid=3RMXBH3PKYJGI&amp;coliid=I1O66RJ8F39X9C&amp;ref_=wl_it_dp_o_pC_S_ttl
http://www.amazon.com/gp/product/B008KZ5B2E?colid=3RMXBH3PKYJGI&amp;coliid=ISV2S0P4G7A8P&amp;ref_=wl_it_dp_o_pd_S_ttl
http://www.amazon.com/gp/product/B0091O17LM?colid=3RMXBH3PKYJGI&amp;coliid=I34HD7IS9IX5AA&amp;ref_=wl_it_dp_o_pC_nS_ttl
http://www.amazon.com/Bandai-Hobby-Version-Sinanju-Animation/dp/B00B596V26?ie=UTF8&amp;keywords=sinanju&amp;qid=1465330289&amp;ref_=sr_1_1&amp;sr=8-1
http://www.amazon.com/Bandai-Hobby-Freedom-Version-Building/dp/B01BD3NJ8C?ie=UTF8&amp;fpl=fresh&amp;redirect=true&amp;ref_=s9_simh_gw_g21_i1_r
http://www.amazon.com/Bandai-Hobby-RX-93-2-Gundam-Counterattack/dp/B00KRVJBFW?ie=UTF8&amp;keywords=hi%20nu%20ver%20ka&amp;qid=1465330281&amp;ref_=sr_1_1&amp;sr=8-1
there is 3 suggestions. 2nd comes out Friday. Price range is about 50 - 75 dollars.
or hell, if you can sneak a few pictures of kits he already has (to give us an idea on what type of kits he might like). if that is above your desired price range lemme know, I can go into the lower price tier of model kit.
Looks like its down to 73 now, but it was 80 when I got it on amazon
I believe I have finally decided on my first Gunpla, the HG Age II Magnum and want to make sure the items I have added to my Amazon cart are ideal or not for a beginner/future use for HG and MG kits. The list is as follows:
I know that this sub has a list of tools and tutorials, but because I'm trying to budget, I was thinking no more than $100 would be ideal for me to start with. Since I'm beginning with HG models, I don't think I need a full set of Gundam markers, but if it's needed/required/highly suggested, I might pick them up as well.
So I have read and seen that top coating and panel lining are essential for MG models to make them pop. Are they just as essential for HG model kits? Looking at pictures of the Age II Magnum I'm planning on getting from Amazon, it doesn't seem to have a lot of indents for panel lining. Of course, I could be wrong and be blind as a bat. If I don't do any sort of panel lining, is it still a good idea to add a top coat regardless?
Also, how soon can one get into MG kits? I was originally going to jump straight into either the MG GM Sniper II or the RX-78-2 Ver 3.0 but after doing some research over the past few days, I've decided I'll be doing a few HG's to begin with as I haven't built model kits since I was like 7 or 8 with my dad. I'm thinking after the Age II Magnum, I was thinking about getting either the HG Double O Diver or the HG 00 Shia Qan[T]. Maybe after I complete the 3 HG's I've listed, is it possible to jump to the the GM Sniper II?
TL;DR:
The PG looks to be the Strike Freedom
Second from left is the Sazabi Ver. Ka
Far right is one of the Unicorns, maybe Full Armor? Not sure about far left or second from right.
I can relate to that. I've never really had a SAL package go missing or get damaged, but its worth the peace of mind to go for the more expensive options on more valuable purchases.
I actually purchased my Sazabi Ver Ka locally (even though it was 60$ more expensive) because I was mortified that the box would get dinged up due to its sheer size, so I wanted it to travel as small a distance as possible.
Sorry, I meant to say MG (Master Grade):
Bandai Hobby MG Sazabi Version Ka Model Kit (1/100 Scale) https://www.amazon.com/dp/B00EOEBG2Y/ref=cm_sw_r_cp_apa_i_-GOPDbSXK9MWN
Bandai Hobby MG Sazabi Version Ka Model Kit (1/100 Scale) https://www.amazon.com/dp/B00EOEBG2Y/ref=cm_sw_r_cp_apa_AM1NAb889NPRG
Update: its now almost $90
As a few others have mentioned, the MG Sazabi Ver. Ka is the companion kit to the Nu Ver. Ka. Right now it is $85 on amazon, which is $15 above your price range. However, $85 is a great price for the kit considering the lowest price it has been on amazon was $74. As a side note, I have to say the Sazabi Ver Ka is one of the best kits I have ever built.
Another option is the Hi-Nu Ver. Ka. It is an alternate version of the Nu Gundam (the one that you linked). From what I understand, the Hi-Nu is an amazing kit, and is currently $73 on amazon.
Keeping in the same set of kits, you can get several SD kits. They are smaller cuter versions of the full kits and are much cheaper and easier to build. Plus getting three of them will cost about $40. Here are the links:
Nu Gundam SD
Sazabi SD
Hi-Nu Gundam SD
I hope this helped. If you can find out more about which series they like, we can offer more suggestions.
You definitely have better options
With 10-20 bucks, you can get a great HG kit. HG (high Grade) kits are much more fun and are generally much better in quality. May i suggest one of these:
----: http://www.amazon.com/dp/B00IAGUS7G/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&amp;colid=354ZD0WDE1CHP&amp;coliid=IKLBTEST96E20
----: http://www.amazon.com/Bandai-Hobby-Amazing-Model-Scale/dp/B00E3JH52K/ref=sr_1_2?s=toys-and-games&amp;ie=UTF8&amp;qid=1420200253&amp;sr=1-2&amp;keywords=hg+zaku
----: http://www.amazon.com/Bandai-Hobby-Gundam-Fenice-Action/dp/B00FKL6E4K/ref=pd_sim_t_3?ie=UTF8&amp;refRID=04P9J2F778V4ZT3CWPWB
Also, it's a really good idea to check online reviews.
It was purchased as New http://www.amazon.com/gp/product/B00FKL6E4K/ref=oh_aui_detailpage_o00_s00?ie=UTF8&amp;psc=1
I actually went to a con like that today for the first time, it was a cool experience tho I went to a small one.
Many people dress up and cosplay but they're not in character, some don't even like it when you take random pictures of them without permission, but you they love if you compliment them and if you ask for a pic they will get in character.
Some people are really crafty, others paid for their cosplay and had someone do it, some others just didn't even try :P
you can buy cool stuff, I bought a few new Gundams today and there was a $300 dollars one that I was really tempted to get.
I've got this guy waiting on me for when I get home! https://www.amazon.com/dp/B0129DW0WG/ref=cm_sw_r_cp_apa_JICfAb21FM6G1
Hi there! Great gift idea. My gf actually picked out my first kit for me recently and chose a HG Barbatos model for my studio. Definitely would recommend that. http://www.amazon.com/Bandai-Hobby-Orphans-Barbatos-Iron-Blooded/dp/B0129DW0WG
From a pure aesthetic perspective, the MG Shin Musha Gundam is fucking DOPE! Nothin screams wifey material more than buying yo man a robot samurai lol... Def next on my buy list. http://www.amazon.com/Bandai-BAN153804-Shin-Musha-Gundam/dp/B0018P09QQ
I think this matches better
Just grab a Barbatos and a Graze. I think I'm going to start another graze now myself =P
Or if you want to apreciate how far bandai has come with the kits, grab a Barbatos and The old HGUC Gun Cannon or RGM-79 kit
Well, good news, you can get them in HG! :)
&#x200B;
https://www.amazon.com/Bandai-Hobby-Orphans-Barbatos-Iron-Blooded/dp/B0129DW0WG/ref=sr_1_1?keywords=hg+barbatos&qid=1555211105&s=gateway&sr=8-1
&#x200B;
https://www.amazon.com/Bandai-Hobby-Barbatos-Blooded-Orphans/dp/B018TGV2TE/ref=sr_1_9?keywords=hg+barbatos&qid=1555211105&s=gateway&sr=8-9
Hey everyone!
I'm as new as it gets. So, I made a shopping list after doing some research on everything that I think I need to start. I'll place the links to all the items in the lines below. Everything is on Amazon because... well why not?
Gundam
Glue
Marker
Tweezers
Knife
Cutters
Mat
More Markers!
*Krylon Matte Finish
Am I missing anything?
I'm not familiar with the anime but how does this one look?
Gundam
It's a HG 144 Size
I recently upgraded to the Gundam Planet Nippers side cutters and highly recommend them. These really cut and not just pinch the plastic to give that clean cut. The result is less cleanup with the Xacto blade.
https://www.amazon.com/Gundam-Planet-Premium-Nipper-Plastic/dp/B012TMXDAU/ref=sr_1_1?ie=UTF8&amp;qid=1469408203&amp;sr=8-1&amp;keywords=gundam+planet+nippers
I have been using these, and have only used them a couple of times
https://www.amazon.com/gp/product/B012TMXDAU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&amp;psc=1
Here is the MG Freedom 2.0- Bandai Hobby MG Freedom Gundam Version 2.0 "Gundam Seed" Building Kit (1/100 Scale) https://www.amazon.com/dp/B01BD3NJ8C/ref=cm_sw_r_cp_apa_E9lAzbHWFDMMV
Here is the MG Strike Freedom kit in the photo- Bandai Hobby Strike Freedom Gundam Seed Destiny Mobile Suit Model Kit (1/100 Scale) https://www.amazon.com/dp/B000JCES5W/ref=cm_sw_r_cp_apa_.-lAzb6Q0GKQJ
I don't know anything about these models- can they be played with at all, or are they only for display? Thinking as a gift for my 9 year old, who will want to play with it.
Referring to models like: https://www.amazon.com/Bandai-Hobby-Freedom-Version-Building/dp/B01BD3NJ8C/ref=sr_1_23?keywords=gunpla+kit&amp;link_code=qs&amp;qid=1570492231&amp;sourceid=Mozilla-search&amp;sr=8-23
Total noob here about to dive in scared on my first-ever build with a Master Grade kit. Just had to have this love at first sight.
Is a tool set like this a smart buy over getting the main essential ones separately?
If not, could you guys kindly recommend a list of half-decent quality tools that would fit a budget of $20-30 (or possibly for a bit more if absolutely necessary for a quality build)?
Thanks guys.
http://www.amazon.com/Bandai-Hobby-Sazabi-Version-Model/dp/B00EOEBG2Y/ref=sr_1_1?ie=UTF8&amp;qid=1417304074&amp;sr=8-1&amp;keywords=sazabi+ver+ka
Here you go :D well it's not really a store but better than nothin :D
https://www.amazon.com/gp/product/B006F9CFWQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&amp;psc=1