Best jewelry making wire according to redditors
We found 47 Reddit comments discussing the best jewelry making wire. We ranked the 26 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 47 Reddit comments discussing the best jewelry making wire. We ranked the 26 resulting products by number of redditors who mentioned them. Here are the top 20.
So is this stuff G-Plat?
They already make a bunch of different things like this for crafting jewelry:
http://www.amazon.com/gp/product/B0068RQ85K/
http://www.amazon.com/Beadsmith-Twist-Curl-Wire-Coiling/dp/B005K0M396/
http://www.amazon.com/gp/aw/d/B002ATQU30
You could likely find these at an art supply store as well.
It's pretty much this. <-cake topper tutorial, but the same idea.
The wire I used is very malleable, so you only really need pliers for sharp corners or tight loops and cutting. The trick is to not bend and re-bend any pieces. The more you mess with a bend, the more risk you have of making it look funky and not smooth.
Get the effect in camera with nylon wire
Here ya go! No problem at all
Modern Findings(TM) 18 ga Square... https://www.amazon.com/dp/B07F6QQPLR?ref=ppx_pop_mob_ap_share
I love this, what a great gift. My only suggestion would have been to use the thick high temp wire for the nose ring. You stick in the wire while the clay is damp and the thicker high temp wire can easily go to Cone 10
Oddly enough, I purchased on Amazon but it can be picked up at your neighborhood Hobby Lobby Store.
Beadalon 316L 26ga
silvers cheap, i copped about 20 feet of it in thin gauge wire back in april and i still have some left. definetly a good investment.
http://www.amazon.com/Gauge-Silver-Round-Wire-Thinnest/dp/B004OZIFJ0/ref=sr_1_25?ie=UTF8&amp;qid=1415038753&amp;sr=8-25&amp;keywords=.999+fine+silver
now if the price of river gold would come down a bit id be ECSTATIC
http://www.amazon.com/gp/product/B001R8I5T2?psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o00_s00
Fantastic looking. If someone is set on doing something similar there is this:Artistic Wire 26-Gauge Bare Copper Wire, 30-Yards. You'd want your guage in the high 20's at least.
Thanks for the reply I was just confused because I had a friend who can feel energy tell me he could feel energy from both sides of the pendant.
I do have another question since you have been making SBBs, do they have to be made out of copper? Because I have some wire that is copper, but coated in a non conductive material like this for example https://www.amazon.com/Beadalon-Artistic-30-Gauge-Silver-30-Yards-x/dp/B003WLXH4U will the SBB coil still be functional?
Also do things like real gold wire, sterling silver, and guitar strings work as SBB coils?
Here is the desktop version of your link
Beadsmith DA2610-COP 12-Gauge Aluminum Craft Wire, 39-Feet, Light Copper https://www.amazon.com/dp/B00J3MK3GW/ref=cm_sw_r_cp_apa_i_7zI0Db7ZT3CFX. Most likely this
Something like this?
Craft County 10 Yards of 30 Gauge Cloth Covered Wire - for Jewelry Making, Ornament Crafting, and Wire Sculptures (White) https://www.amazon.com/dp/B07NSGNJ64/ref=cm_sw_r_cp_apa_i_s.VADbHGZGPGT
Should I get Half-Hard Temper or Soft Temper?
Guys I just ordered my first rda and I am thinking about ordering prebuilt coils and I found these on amazon wondering if they will work for me cus it is a really good deal 80 coils for 10$...I vape out of my tanks at 50-55 watts if that helps! Let me know what you think and here is the link
Prebuilt Handmade wire 8 in 1 Heat Resistant with 80 Pieces Premade Wire for DIY Craft Use https://www.amazon.com/dp/B07L3NZVZB/ref=cm_sw_r_cp_apa_i_qsOIDbR6429FB
Outus 10 Pieces 0.3 mm Bare Copper Wire Jewelry Beading Wire, Mixed Colors https://www.amazon.com/dp/B01JCREGCO/ref=cm_sw_r_cp_apa_f.XBybPNEJE1F
I bought that and used the silver wire. You literally cant even see it its so small. Lol but its strong for what its used for. I drilled small 1mm holes and wrap them around to hold it. I feel like adhesive would give out after months. Especially in the hot and humid where I am.
I recommend wire. .3mm.
Maybe you can make something with thin, plain, flat silver strips: http://www.amazon.com/Bezel-Wire-Cloisonne-Silver-005/dp/B005G05UG8
I've got both of those! I find LR Vivi Nova heads work better. The Vivi Nova in general has wicking issues, and I think the higher resistance heads just have too much surface area and the wick can't keep up. Even at the same wattage, I tend to get more dry hits on the HR heads. As for the Nova itself, it has wicking problems. If you vape it hot, prepare to tilt it constantly to keep the coil wet and stop dry hits. It also mutes the flavor.
That said, I still like my Nova, and just got my mini nova yesterday. I'd suggest it, just know that it isn't perfect, but it is cheap.
For rebuilding it, you need silica or cotton wicks, a resistance wire (32 or 34 gauge nichrome or kanthal), and a non-resistance wire (I suggest using this silver, you NEED the silver or you'll burn the silicone). Check YouTube to find out how to build it.
Here’s a listing of all the included material
eBoot 30 Pieces Photoresistor Photo Light Sensitive Resistor Light Dependent Resistor 5 mm GM5539 5539 https://www.amazon.com/dp/B01N7V536K/ref=cm_sw_r_cp_api_i_-wV6CbC6051BJ
Beadalon Artistic Wire 30-Gauge Bare Copper Wire, 30-Yards https://www.amazon.com/dp/B0048927RI/ref=cm_sw_r_cp_api_i_vEV6CbC9KF2ZQ
MCIGICM 200pcs 2n3904 npn Transistor, 2n3904 Bipolar (BJT) Transistors NPN 40V 200mA 300MHz 625mW TO-92-3 https://www.amazon.com/dp/B06XRBLKDR/ref=cm_sw_r_cp_api_i_UEV6Cb66Z0SC2
3mm Diffused LED Diode Assortment Kit - Pack of Assorted Color LEDs and Resistors (1000 pcs) - Red, Green, Yellow, Blue and White Light Emiting Diode Indicator Lights from Plusivo https://www.amazon.com/dp/B07GBFJ823/ref=cm_sw_r_cp_api_i_dFV6CbWBSS5AD
hey guys, I recently picked up some 22gauge 316L stainless steel wire and it's had a funky taste to it since ive started vaping it. At first I thought it was a burnt wick but the cotton wasnt singed at all and Ive been using temp control with it. Ive tried 2 different builds and stainless steel just tastes different than kanthal and nichrome to me.
[heres the wire i bought] (http://www.amazon.com/gp/product/B001R8LLW0?psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o00_s00)
, im not sure if this is meant for vaping but can someone help me out? ive only been vaping it for about a day so maybe it needs to break in?
This is what I've been using. Works super well and is 316L.
I don't know about op, but I picked up some plain 22g 316l beadlon wire from amazon for about 10 bucks at 32ft. Beadalon Round Wire 316L Stainless Steel 22 Gauge, 10-Meter https://www.amazon.com/dp/B001R8LLW0/ref=cm_sw_r_awd_6gdsub0YQ1X67
317L is used in welding so if you have a welding supply store near you it is possible to find it there. Personally i use 316L, if you can wait you can grab some from fasttech or there is always Amazon. Beadalon 26g 316L.
Since LV was sold out of 316 when I ordered my cuboid, I ordered this. It's obnoxious that it doesn't have a spool, but other than that, it's been working fairly well.
I ordered mine from an eBay seller that has since sold out. origin Vape has the UD branded wire in stock. They are a reputable site but there are probably better deals out there. Many people use the Beadalon brand sold at craft stores.
Safe? Doesn't say uncoated but other people have used it.
Here ya go. You might have to do a search for other gauges but that's the exact listing I bought mine under
Couple 26 gauge still left on Amazon still