Best powersports mufflers & baffles according to redditors

I love my 550 and over time I've added a bit to it:

• Dillon 550 Tool holder & tools
  
  
• ERGO roller handle
  
  
• Ultramount
  
  
• Case & bullet output system
  
  
• Skylight LED
  
  
• Bullet tray
  
  
• Bin Barriers
  
  
• Primer Track Bearing Plate w/Ball Bearing upgrade
  
  
• Perfect Powder Baffles

It is an '82 XS400 special. It ran from 77 to 82. I have drag bars, but left all the cables the original length. The horn bracket got flipped upside down so I could access it/install a new one. I made a bracket that attaches to the bar running down in front of the engine to hold to LED fog lights, run by an auxiliary switch. Painted and wrapped the headers and have emgo shorty mufflers. Emgo pod filters, and a puck-style filter for the breather tube nipple. Led tails, led indicator lights, Upgraded headlight. Point of note on the headlight, mine was a sealed beam halogen. So to add a new bulb you have to buy an aftermarket reflector housing from candlepower.

EDIT: Also forgot Oury grips, cafe mirrors, new fuel lines, fuel filter and vacuum tube.

http://www.amazon.com/gp/product/B007CA6E56/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B002GTKAHQ/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B003T0ITF6/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B00HAQGO20/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B00230QCIY/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B006VFL0SO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B00HDYB3P2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B000N5UVME/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B0022ZUJGG/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B000UKKSTI/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B00HJEGQQ2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B007ZGKKMA/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B009SK7N8K/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B005ETCIO8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Gorgeous looking bike, have fun!

I went with Competition Werkes exhaust with the baffle and their tidy tail kit. Fairly cheap, I think $650 shipped from them. I did see the tidy tail separately on Amazon and Revzilla for about $20 cheaper the other day

https://www.instagram.com/p/BPQSXb2j4V-/

I've read all over that tuning for the exhaust on the 13+ years is a pain, but isn't neccessarily required. I havnt noticed any difference in power, but it does pop on decel a ton. Some people complain about hesitation off the line, but I havnt had any issues

The M4 GSXR 750 exhaust will bolt right up and looks and sound pretty damn good for $260

https://www.instagram.com/p/BOvLXpTjo-S/

11-16 SUZUKI GSXR600 & 750: M4 GP Series Slip-On Exhaust - Black (BLACK) https://www.amazon.com/dp/B007C68PNY/ref=cm_sw_r_cp_apa_5fIJybTM02DJ6

https://www.instagram.com/p/BPQOJNYDhpw/

I reused the old turn signals so I wouldn't have to cut the wires. They included smaller ones with splice connectors

I didn't want to go too crazy and drill a bigger hole so I used their plate light and had to splice 2 wires

The fit and finish of the kit is great for the price. A little gap here or there, but it feels solid and everything works

I also got a Supersprox stealth 45T for $100 on Amazon

+2 over stock and makes a bit of difference. Will fit on a broken-in stock chain too.

https://www.instagram.com/p/BPP_VqHjYk6/

Supersprox Stealth Gold 530 45 Tooth Rear Sprocket for Triumph 955 1050 Speed Triple Daytona Sprint https://www.amazon.com/dp/B00HF7XXB4/ref=cm_sw_r_cp_apa_c7HJyb5C9XEJW

My next mod will be a steel braided line for the rear. I noticed that when I took off the chain guard, my chain had touched the brake line and scuffed it a bit. I had to adjust the banjo bolt to avoid it touching again. I'll be replacing that ASAP

I too highly recommend the Two Bros black series. I found mine (titanium version) on Amazon for less than $450. Considerably cheaper than the Arrow slip on, and IMO more aggressive sounding. It is quite a bit louder than stock, and you can get an inexpensive sound suppresor if it is too loud for you. I didn't use any ECU tuning myself, but I did get it remapped at the dealer and have been more than happy with the results.

Not sure the budget BUT my bike came with this exhaust (for a 2005) before it was stolen and I liked the exhaust so much I bought it again! Really gets the throaty V-twin sound out.

They should also have a stainless steel model for a few cheaper which sounds exactly the same of course

Suzuki SV650 High Mount DS70 9” Carbon Fiber Oval Muffler Exhaust Slip On 17 https://www.amazon.com/dp/B071K7BZKS/

To think 18"/stock are another 4" past that....
Says you done goofed up that link.

Google "fiberglass muffler packing" and look for something thin you can try different layers of. Should find something like this.

I run the zeda 88/ cdh 66 pipe and its quite good. Added enough torque that I can pull wheelies now. Needs a muffler to be at a reasonable volume though. https://www.amazon.com/dp/B01N3ONOY9/ That's the muffler I used. Doesnt reduce performance much, and makes it very very quiet.

https://amzn.com/B000N5UVME

I have a very similar setup on mine. Pretty cheap, and easy to install:

https://www.amazon.com/dp/B07PQ6XV29/
and
https://www.amazon.com/dp/B07GS183Q4/

I love that color. Was going to go for that but there was a significant price difference between that and an all black one.

Question, this m4 exhaust I was looking at says universal. Would you happen to know if this will fit our bikes?

JFG RACING Motorcycle 1.5-2" Inlet GP Series Slip-On Exhaust Universal Muffler-Black https://www.amazon.com/dp/B0713PZTYQ/ref=cm_sw_r_cp_apa_i_TkTdBbZETCWMA

I used this muffler from Amazon on my motorized bike and it works great. On your pipe you will need to use a small piece of heater hose and some hose clamps to attach it as your pipe and the muffler have the exact same size entry/exit points. I know this because I have that exact expansion chamber lying around.

​

Also you can cut it down to whatever length you need, in my case I cut it in half and it still works beautifully to keep the racket down.

I've had great luck with Glixal parts...from Amazon. https://www.amazon.com/Glixal-ATKS-038-Performance-Exhaust-Muffler/dp/B01DQYFZVU/ref=lp_12087729011_1_4?srs=12087729011&ie=UTF8&qid=1483575762&sr=8-4
I don't have this...I just have bought a lot of their products, and have been impressed, for the price.

Yea they're just moto gp shorty tips. That's slip on the stock 1 3/4 exhaust. This is where I purchased them https://www.amazon.com/dp/B00LV1FONU/ref=cm_sw_r_other_awd_bAy8wb6PX97MX

All i know is, ive never seen an Akra like this...I'd stay away. I recommend the M4 slip-on or the Akra full system (the slip-on doesn't say it fits the FZ-09, but it might)

Personally, I don't like the look at all. It's also not as throaty sounding as I like. I'd put out the extra $54 and get what I have.

https://www.amazon.com/M4-2014-2016-Muffler-Exhaust-YA6914/dp/B00K36BUGO/ref=sr_1_1?ie=UTF8&qid=1485653104&sr=8-1&keywords=FZ09+M4+Exhaust

Amazon has banana pipes for around 30$ and I noticed a really big difference after I install it. Sounds more like a 2 stroke should and a lot more power. I think this is the one I bought. https://www.amazon.com/CDHPOWER-Chromed-Banana-muffler-design/dp/B06Y65HD7F/ref=mp_s_a_1_11?keywords=80cc+exhaust&qid=1573140941&sprefix=80cc+exha&sr=8-11

The pipe is on Amazon from Radiant.
https://www.amazon.com/Radiant-Cycles-Shorty-Exhaust-2003-2009/dp/B00M9GM3D0?ref_=bl_dp_s_mw_9179962011