(Part 2) Best sump pumps according to redditors

I recommend using a fan that is for blowing up inflatable beds. The one I have has different sized tips on it and works very well for cleaning computers.

https://www.amazon.com/Smart-Air-Beds-Electrical-Black/dp/B00AP5KOCO/ref=sr_1_5?ie=UTF8&qid=1478096415&sr=8-5&keywords=inflatable+bed+pump

FYI - Amazon has the Watchdog for less, but reviews are spotty.

https://www.amazon.com/dp/B000KXZO6M/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=36VYAXRSFNHGD&coliid=ID3FTUIOXMP3U

This one is even less money are far better rated:

https://www.amazon.com/ESP25-Battery-Back-Up-System-Audible/dp/B000HOQZDU/ref=sr_1_1?ie=UTF8&qid=1473792173&sr=8-1&keywords=back-up+sump+pump+battery

You’ve got 8-12’ of water that’s being pumped upward. When the pump shuts off that water succumbs to gravity and tries to go back into the pit. To prevent that, and short cycling your pump, you have a check valve which only allows the water to go in one direction. But when it does it’s job, you’ve got about 8-20lbs of water slamming against it, causing the thud and shaking.

This is normal. You can get one of these or similar if you want a quieter experience.

Interesting idea. It's a lot cheaper than a wifi sump-pump monitor that's for sure.

Only issue I can think of for that is that it won't go off if you get a sewer drain backup into there (if you have a drain on the floor), or a water heater leak etc.

Mondi 1585x pump. 2 Brinks 6 event timers, one for lights, one for pump.

So on 2nd picture I spotted model number - JPS225V

https://www.homedepot.com/p/Everbilt-0-25-HP-Pre-Plumbed-Sink-Tray-System-Sump-Pump-THD1035/205616019

First thing it says: Great for washing machines, air conditioners and more

However the reviews aren't the best to say the least. But it looks like a regular shitty Everbilt pump in an enclosure. I had a pedestal one shit the bed on me when my hot water tank sprung a leak and it seized due to hot water (plastic impeller came off the shaft). I don't know if you do laundry on hot settings but that's something to ponder about.

I'd take a look if you can open it and swap out the pump itself for something like this to stay on the safe side and also I'd get a $5 water leak sensor.

https://www.amazon.com/gp/product/B000X0DEDC/

https://www.amazon.com/Instapark-Battery-powered-Detection-Batteries-Included/dp/B01IWTCLHA/

yes

http://www.amazon.com/Zoeller-Mighty-mate-Submersible-Sump-Pump/dp/B000H5PYR2/ref=sr_1_1?ie=UTF8&qid=1426310131&sr=8-1&keywords=zoeller+m53

or

http://www.amazon.com/Zoeller-507-0008-Pre-assembled-Battery-Backup/dp/B002N6VHXI/ref=sr_1_8?ie=UTF8&qid=1426310188&sr=8-8&keywords=zoeller

2nd the suggestions on a battery (or water powered) backup. One thing to keep in mind is to make sure you get one that is sized appropriately for the amount of water you need to move.

I've had this for a little over a year now and it has run quite well on two occasions where the main pump was out
Liberty Pumps 441 Battery Back-Up

Have you tried running vinegar through the system? A similar thing happened to mine and that fixed it right up. It could just have some buildup in it that may be slowing the water flow down enough that the flow transducer isn't getting activated. Has the filter been checked?

You can get a cleaning kit on amazon but I would just buy a couple of washing machine hoses, a submersible pump and a 5 gallon bucket to save about $75. There are vids on how to perform the process on youtube.

Here's a link to a cleaning kit (which you'll need anyway, it's an easy process that you'll need to do at least once a year).

http://www.amazon.com/Tankless-Water-Heater-Cleaning-Kit/dp/B007C4U9QW/ref=sr_1_1?s=hi&ie=UTF8&qid=1412342368&sr=1-1&keywords=tankless+water+heater+cleaner

He could always put in something like this.

Candidly, if it was me, I would install a freestanding laundry tub that drained into the sump basin and discharge the clothes washer into the laundry tub.

Sorry for being a bit off-topic, but if you have a sump pump, consider a backup. There's intentionally zero automation in this setup, but I have a completely analog water-powered backup pump. Even if the power is out, as long as city water pressure is maintained, my basement should stay dry.

Something like this:
https://youtu.be/1w8n0L3uUCE

Edit: Link should be: https://smile.amazon.com/Basepump-750-EZ-Water-Powered-Backup/dp/B009NINP70/

Here is another pump that I've used. https://www.amazon.com/Little-Giant-WRSC-6-Drainosaur-Combination/dp/B0018LB522/ref=sr_1_1?ie=UTF8&qid=1480304283&sr=8-1&keywords=506065

i cannot say for sure, but mine does. here is a link to the sump pump basin etc that i use for reference

https://www.amazon.com/ZOELLER-Sump-Pump-115V-Model/dp/B00C6XTKM8/ref=sr_1_13?qid=1550601194&refinements=p_89%3AZoeller&s=kitchen-bath&sr=1-13

​

depending on your setup, you probably have a few condensate lines from hvac or french drains feeding the sump pump basin. assuming your water level can be maintained, and doesnt back flow, you should be able to see and hear the pump engage if setup properly.

I've used cheap fish tank pumps and what I've found is that they pump the water so slowly that it doesn't really speed up the cooling process. What I use now is a sump pump: https://www.amazon.com/gp/product/B01AT15I9W/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

This thing is awesome and its only 40$. I also created a keg/carboy cleaner using the same pump based off of a DIY here:
http://www.homebrewtalk.com/showthread.php?t=300441

How would I tell if a pump will shut off when it doesn't detect water? this one showed up when I looked in the sump pump category, so would it do the trick? I'd love to just drain it somewhere else, but I'm pretty sure the sheer amount of water it produces would drown most plants, and I just don't have anything around that would be low enough to drain into properly that wouldn't still need to be emptied pretty frequently. The drainage hole is maybe six inches above ground level, so I don't really have a lot of room to maneuver it before the water just starts getting backed up.

How about this one? Moves about 6 gallons a minute:

https://www.amazon.com/dp/B01LZ8RP40?psc=1

Thank you for the help! I inherited this pond when I moved in...but I believe this is what I have. https://www.amazon.com/Laguna-4000-Clear-Flo-Kit/dp/B00T3L4KNU/ref=sr_1_fkmrnull_3?keywords=laguna+4000+clear+flo+kit&qid=1554230131&s=gateway&sr=8-3-fkmrnull

Here is a picture of the pond. https://imgur.com/a/KrOkpmV
Sub Pump I use is: https://www.amazon.com/Superior-Thermoplastic-Submersible-Utility-10-Foot/dp/B07HYX2XGX/ref=sr_1_fkmrnull_5?keywords=Superior+Pump+91250+1%2F4+HP+Thermoplastic+Submersible+Utility+Pump+with+10-Foot+Cord&qid=1554230544&s=gateway&sr=8-5-fkmrnull

Fish enjoy hiding behind the rocks as they are just lined by the wall. Makes it super hard to get them out.

I appreciate all the help and suggestions.
How do I clean the pond in the future when I have fish in there again? Do I need to do the drain again?

Can you add a video of the flow into the basin?

Is it a submersible pump? Where is the float set? If it keeps kicking on it is because the float is being triggered. Is the float also submerged as a pressure sensitive float? If so that float switch may just need to be replaced.

I used to have submersible pump and hated it. Replaced with something like this.
WAYNE 1/2 HP Cast-Iron Pedestal Pump https://www.amazon.com/dp/B0002YVPRG/ref=cm_sw_r_cp_apa_i_H0lQCbSTCHQ9H

I was thinking if I was in your situation I would replace the first 90 with a tee and put the required plumbing at that point, however, after sleeping on it I realized this simplest solution could be a laundry tub with a pump. They typically have ~10-15 feet of head so you can just cut the pipe between the 45 and cleanout to install a wye and pump to that point. Something like this:https://www.amazon.com/BurCam-300514WH-Laundry-Automatic-Switch/dp/B07W6JPJM7

Most washing machine manufactures state data on their pumps.

Sounds like you've got the sleeve figured out, digging and sealing outside is the right path.