(Part 3) Top products from r/MarvelLegends

Jump to the top 20

We found 24 product mentions on r/MarvelLegends. We ranked the 95 resulting products by number of redditors who mentioned them. Here are the products ranked 41-60. You can also go back to the previous section.

Next page

Top comments that mention products on r/MarvelLegends:

u/versus_mode · 2 pointsr/MarvelLegends

Welcome to the club! I just started about a year ago, with Spider-Gwen and Scarlet Witch, but got super into it when the Venom wave came out. Focusing mostly on X-Men, Spiderverse, and core MCU stuff. So in case it was in question, these last couple of weeks have been pretty damn amazing for me, and many others.

As far as display ideas, one of the most affordable and widely used display shelves for figures is IKEA's Detolf display cabinet for $60.
https://www.ikea.com/us/en/catalog/products/10119206/

I came pretty close to getting it myself, but the only thing that stopped me was the fact that I'd want to display my figures along a longer lineup rather than the more compact squared space provided by the Detolf. Instead, I went with a traditional Billy/Morliden Bookcase, which goes for $140. But you can get it as just a Billy bookshelf without doors for much cheaper, $70.
https://www.ikea.com/us/en/catalog/products/S59292025/

I just went with the doors option because I only planned on having figures on the top 3 shelves, and wanted to store random books or boxes of incomplete bafs/other unused figures

The last thing I'm looking into is shelf lighting. I want my figures to really stand out, and light kits go for about $25-$30 online. Considering something like this, though a small handful of reviews don't think this specific set is bright enough.

https://www.amazon.com/Under-Cabinet-Lighting-Bookshelf-UL-listed/dp/B00URLTUXU/ref=asc_df_B00URLTUXU/?tag=hyprod-20&linkCode=df0&hvadid=167156299330&hvpos=1o1&hvnetw=g&hvrand=13487189436651044644&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9028165&hvtargid=pla-311113412869&psc=1

​

A final tip before I go; in addition to ebay, sites like Mercari, Letgo, OfferUp, and even Craigslist have occasionally helped me get figures for cheap.


Good luck out there! And please share your collection whenever you set it up. :)

u/zodd06 · 1 pointr/MarvelLegends

https://www.amazon.com/Molotow-ONE4ALL-Acrylic-Metallic-127-306/dp/B0080ZVV1O/ref=sr_1_13?crid=1WJIRDHPNFJ33

​

the molitov markers are pretty good for that.

whatever paint you use just make sure it's acrylic.

​

if the hand is really stuck you just need more heat and to slowly work it out, but don't do too much too fast at once because you don't want to melt or modify the part.

boiling water for 5-10 seconds at a time until you start to feel that it's getting a little rubbery. it takes time and patience. you have to slowly "work it" out. you can also try a hair dryer or a heat gun (be careful with a heat gun, it will def melt plastic fast, so temper it.) . if possible maybe try somehow to concentrate the heat on the wrist joint but not so much the hand. if you can get that joint to expand it might come out easier. if the part gets too rubbery from too much heat and starts to stretch and you try to pull it out just stop and let it cool off.

​

good luck.

u/Beadpool · 2 pointsr/MarvelLegends
  1. It’s going to be hard to match skin tones. You’ll just have to experiment. Maybe watch some videos on glazing and wet blending. Just a couple techniques that might help get two close colors to transition a bit more seamlessly.

  2. Number of layers depends on how thin the paints are and which colors you’re painting over. When starting, it’s always best to take it slow. If the paint looks good enough to cover in one layer, it’s most likely not thinned enough. Don’t rush it. Let the paint dry thoroughly before applying an additional coat.

  3. https://www.amazon.com/Testors-Spray-Lacquer-Clear-Coat/dp/B009FF6DN4
    Depends if you want a glossier or dull finish, but something like this should be fine. Read reviews & directions. Shake well. Ventilate. Start spraying away from figure, then sweep over figure. Light coats and let dry THOROUGHLY before thinking about another layer. Mess this part up and it’s hard to go back.

    Hope this helps!
u/bdking1997 · 1 pointr/MarvelLegends

Marvel Ant-Man and The Wasp Titan Hero Series Ant-Man with Titan Hero Power FX Port https://www.amazon.com/dp/B072MZ45BT/ref=cm_sw_r_cp_apa_i_WS0vDb6HN4RA0

u/DarkCelestial · 2 pointsr/MarvelLegends

This is a good one
Disney Infinity 3.0 Edition: MARVEL Battlegrounds Play Set https://www.amazon.com/dp/B016LGYSRC/ref=cm_sw_r_cp_apa_i_jZOlDb46T7J76

u/StubbornKindOfFellow · 4 pointsr/MarvelLegends

Get this Superman figure. It's currently $12, but sometimes you can get it real cheap. I got it used on ebay for only $5. But it comes with this accessory that fits perfectly on Cyclops.

u/Erod1527 · 2 pointsr/MarvelLegends

This stuff. Holds its shape well and is plenty long enough. Depending on how long you want the web, take two stems or fold one in half to leave a small open loop on one end to fit around the wrist peg, and then twist and weave it together to make it look like a web line.

https://www.amazon.com/DECORA-Gauge-White-Floral-Package/dp/B010NLWZNA/ref=sr_1_9?keywords=White+Fabric+wire&qid=1567293625&s=gateway&sr=8-9

u/fatguymontaine · 3 pointsr/MarvelLegends

Sweet! I got it about a year ago from Amazon.com. To my knowledge there’s only the two versions. I believe it was this seller. It’s definitely the same box mine came in.

u/digitalherps · 2 pointsr/MarvelLegends

My best holy grail find is -> Spider-man 2099

https://www.amazon.com/Marvel-Legends-Infinite-Spider-Man-Action/dp/B00Q87Y5XW

Had been looking forever for him and finally found him at a fancy walgreens in a college town years ago.

u/JoesusTBF · 4 pointsr/MarvelLegends

The brand is Combination of Life, I buy them on Amazon.
https://www.amazon.com/dp/B01CSB0EI6

u/Avid-Collector · 3 pointsr/MarvelLegends

I use this for right now.
https://www.amazon.com/dp/B001KN12PI/ref=cm_sw_r_em_apa_i_7IiqDb6SEM09A

Top drawer for accessories (blaster effects, symbiote attachments, etc)
2nd for only weapons (guns. Lots of guns, swords, etc)
3rd for heads, hands and head accessories (ex: starlord headphones or jubilee sunglasses, etc)

Until I need bigger for more accessories I get.

u/dsq24 · 2 pointsr/MarvelLegends

I saw a tutorial where they used apoxie sculpting clay.
It’s this one here.

u/PrimeConduitX · 1 pointr/MarvelLegends

SH Figuarts Hulk is the best looking MCU Hulk in my opinion. But, I know how expensive it is and how risky it is to buy loose. I recommend the Diamond select as an alternative which is a tad cheaper but might find it even more cheaper loose on ebay

​

https://www.amazon.com/DIAMOND-SELECT-TOYS-Marvel-Select/dp/B006WYKZX0

u/AxoronMarvel · 1 pointr/MarvelLegends

Marvel Spider-Man 6-inch Legends Series Evil Adversaries: Marvel's Electro https://www.amazon.com/dp/B010SFU0PG/ref=cm_sw_r_cp_api_i_y1ysDbYNGR2B9