(Part 2) Top products from r/NZXT
We found 27 product mentions on r/NZXT. We ranked the 216 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
21. Works 22-100-41 4-Pin To Fan 3-Pin Cable Adapter44; 14.5 in. Long
Sentiment score: 0
Number of reviews: 2
Convert a PWM fan 4-pin header to a regular cooling fan's 3 pin header so you can plug it to the motherboard's 3 pin fan headerNow you can power a PWM fan from motherboard's 3-pin fan header, or control the speed a PWM fan with a fan controller.PWM 4 pin male to regular cooling fan 3 pin female, 14....
Show Reddit reviews22. SilverStone Technology CP14, USB 3.0 Internal (19-Pin) Header to USB 3.1/3.2 Type-C (20-Pin) Key-A Adapter
Sentiment score: 0
Number of reviews: 1
Supports all motherboards with USB 3.0/ 3.1 19-pin headerAdds internal 20-pin key A connector for supporting corresponding front USB Type-C portUsb 3.0 internal (19-pin) to USB 3.1/ 3.2 internal Type-C 20-pin (key A)Internal Type-C 20-pin (key A) port supports USB 3.1/ 3.2 (Gen2/ Gen1), USB3.0, USB2...
Show Reddit reviews23. NZXT 200MM Silent 700 rpm LED Fan - FS-200RB-RLED (Red)
Sentiment score: 1
Number of reviews: 1
Speed: 700 rpm +/- 200 / Input: 5.04W / Air Flow: 89.5 CFMAir Pressure: 0.98mm H2O / Noise: 20.16 dBA / Bearing: Rifle BearingLife: 40,000 hours / 2 Year Warranty11 Blade Rifle Bearing Fan / Sleeved CablesLED On/Off SwitchSpeed: 700 rpm +/- 200 / Input: 5.04W / Air Flow: 89.5 CFMAir Pressure: 0.98mm...
Show Reddit reviews24. Tornado 00520 Large J-Hook
Sentiment score: 1
Number of reviews: 1
Mount to drywall or a wall stud with the same fastener, Working Load Limit: 40 lbExtended length plate design distributes weight evenly for superior holding powerNotches on plate allow for easy leveling and alignment with other hooksRubber coated hook provides added visibility, safety and gripA spik...
Show Reddit reviews25. Phobya Adapter Cable, 4-Pin Molex to 4-Pin (PWM), 30cm, Sleeved, Black
Sentiment score: 1
Number of reviews: 1
Connectors: 4-Pin to 4-Pin Molex and 4-Pin PWM fan connectorBlack sleeve, black connectors, black heatshrinkDimensions: Molex to Molex 7cm, Molex to 4-Pin PWM 30cm
Show Reddit reviews26. StarTech.com 3 ft. (0.9 m) Right Angle USB to Mini USB Cable - USB 2.0 A to Right Angle Mini B - Black - Mini USB Cable (USB2HABM3RA)
Sentiment score: 0
Number of reviews: 1
Connect your Mini USB devices with the cable out of the way3 ft Mini USB Cable / Right Angle Mini USB CableUnrestricted access to your Mini USB mobile deviceTransfer data while charging your Mini USB device without the cable getting in the wayReduce stress on a mobile device connectorCompatible devi...
Show Reddit reviews27. SilverStone 140mm Fan Filter with Magnet for Case Fan/Power Supply Fan and Panel Air Vent FF141B (Black)
Sentiment score: 0
Number of reviews: 1
Fine filter provides great dust reduction properties.Convenient embedded magnet design for easy installation.Convenient embedded magnet design for easy installation.Fine filter provides great dust reduction properties.
Show Reddit reviews28. Grifiti Fat Wrist Pad 12 Inch Wrist Rest for .75 Inch Thick Small Mechanical Keyboards, MacBooks, Laptops, and Notebooks (Wide 12 x 4 x .75)
Sentiment score: 0
Number of reviews: 1
Wrist Pad only. No keyboard or laptop included! This is our Grifiti Fat Wrist Pad 12, which is a NEW size! We now make this 3.5-4 inches wide x 12 inches long x 0.75 inches tall to fit small mechanical keyboards, MacBooks, laptops, and notebook computers.This is a really nice non-skid base made of s...
Show Reddit reviews29. Phobya 3-Way PWM Splitter Cable (Power 3 PWM Fans from a Single Connection!)
Sentiment score: 1
Number of reviews: 1
Connectors: 1x 4-Pin PWM male, 3x 4-Pin PWM femaleBlack sleeve, black connectors, black heatshrinkLength: 30cm
Show Reddit reviews30. PRIMOCHILL Anti-Kink Coils 1/2in.- White
Sentiment score: -1
Number of reviews: 1
Made of strong and durable PVCPackaged in pre-cut 40" lengths1/2in. size will fit 1/2in. OD TubingInexpensive mod for a fresh new look
Show Reddit reviews31. Bgears Cooling Fan Adapter 140mm-Black Black
Sentiment score: 1
Number of reviews: 1
Convert 140mm to 120mm mountingConvert 120mm to 140mm mountingThe Fan Adapter funnel design will channel airflow through the 120mm ventilation hole on the chassis.4 screws included
Show Reddit reviews32. DEMCiflex Computer Dust Filter, Standard 140mm Square, Black Frame, Black Mesh
Sentiment score: 1
Number of reviews: 1
Extends the life of hardware by reducing dust and associated heat issuesMounts with magnetic frameFilter material made from high precision medical grade synthetic meshEasy to install and maintai. No glue, screws or tools neededSize: Standard 140mm Square
Show Reddit reviews33. NZXT Vulcan Enthusiast M-ATX Case with Handle VULCAN M-ATX (Black)
Sentiment score: 0
Number of reviews: 1
Durable Non-slip finished top handle for portabilityFits at least 350mm video cards like the ATI 5970Wire routing holes and extruded side panel provides extra space for cable managementDual 5.25-inch slots and four 3.5-inch slots (internal and external)MODEL: Vulcan Series; CASE TYPE: mATX Chassis; ...
Show Reddit reviews34. NZXT CB-6V 250mm Individually Sleeved 6-Pin VGA Extension Premium Cable (Black)
Sentiment score: 0
Number of reviews: 1
Individually sleeved in a black enclosure to provide a sleeker look that seamlessly integrates into the case's interior.6-pin PCI Express VGA extension cableImprove cable managementLength: 150mm (5.91 inches)
Show Reddit reviews35. Bigelow Tea Novus 7136 Plastic Polish Kit - 2 oz.
Sentiment score: 1
Number of reviews: 1
Great for cleaning and restoring CD/DVD, motorcycle windshields, automobile headlamps, boats, airplanes, aquariums and all acrylic productsCompact kit that fits in your glove compartment, saddle bag or carrying caseCleans and removes scratches instead of filling it inHas helped millions win the war ...
Show Reddit reviews36. Cooler Master MegaFlow 200 - Sleeve Bearing 200mm Blue LED Silent Fan for Computer Cases
Sentiment score: 1
Number of reviews: 1
High air flow for maximum cooling performance.Quiet operation with low RPM.RoHS compliance for protecting the environment.Compatible with Cosmos S, ATCS 840, HAF 932, HAF 922 and Storm Sniper (No LED On/Off function support).
Show Reddit reviews37. Samurai!, the Unforgettable Saga of Japan's Greatest Fighter Pilot
Sentiment score: 0
Number of reviews: 1
Show Reddit reviews38. VELCRO Brand ONE-WRAP Cable Ties | 100Pk | 8 x 1/2" Black Cord Organization Straps | Thin Pre-Cut Design | Wire Management for Organizing Home, Office and Data Centers
Sentiment score: 1
Number of reviews: 1
WIRE ORGANIZING SELF BUNDLING TIES - Get organized fast with these simple to use, self-fastening thin ties that will contain and store cords and wires quickly and safely; Secure large cords and bulky cables with ease for a neat finishWIRE AND CORD MANAGEMENT - These bundling ties are ideal fasteners...
Show Reddit reviews39. LEDGlow 4pc Red LED Interior Footwell Underdash Neon Lighting Kit for Cars & Trucks - 7 Unique Patterns - Music Mode - 8 Brightness Levels - Auto Illumination Bypass Mode - Universal Fitment
Sentiment score: 0
Number of reviews: 1
LEDGlow 4pc 9" Red LED Interior Kit Adds Custom Red Accent Lighting the Footwells & Under the Dashboard of Any Car or TruckControl Box Features 8 Solid Illumination Modes with Various Brightness Levels, 3 Fading Modes, 3 Strobing Modes, 2 Scan Modes, 1 Sound Activation Mode that Reacts to Music Play...
Show Reddit reviews
Thanks for the contest, Rob! Here are pictures of my wonderful NZXT Vulcan, with the following specs:
Type|Item|Price
:----|:----|:----
CPU | Intel Core i5-2400 3.1GHz Quad-Core Processor | N/A
Motherboard | Dell Foxconn mATX H67 motherboard | N/A
Memory | G.Skill Sniper 8GB (2 x 4GB) DDR3-1333 Memory | $48.99 @ Newegg
Memory | G.Skill Sniper 8GB (2 x 4GB) DDR3-1333 Memory | $42.99 @ Newegg
Hard Drive | Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive | N/A
Hard Drive | Western Digital Caviar Black 1TB 3.5" 7200RPM Internal Hard Drive | $100 pre flood
Video Card | EVGA GeForce GTX 560 Ti - 448 Cores 1.25GB Video Card | $279.99 @ Amazon
Case | NZXT Vulcan Black MicroATX Mid Tower Case | $68 @ Newegg
Side Fan | NZXT 200mm silent red LED case fan | $19.99 @ Amazon
Power Supply | Corsair 600W ATX12V Power Supply | $59.99 @ Newegg
Optical Drive | Unknown Dell DVD+RW | N/A
| | Total
| Prices include shipping and discounts when available. | $619.95 + $600 for the original Dell Vostro
| Generated 2012-03-17 20:15 EDT-0400 |
The long story:
So as you can see from the parts list I started off with a prebuilt Dell Vostro 460 that at the time I thought was banging. I had unfortunately bought it mere weeks before discovering r/buildapc because I had never built a computer before. Well it turns out that the GPU that it came with - GT 420 - was fine enough to play Starcraft 2, but was barely able to render Skyrim and BF3 on low settings.
So after reading r/buildapc for a while, I slowly started upgrading piece by piece starting with the ram (I know 16 gb is ridiculous, the second kit was for another computer that I ended up not using) and added an old hard drive I had.
I then wanted to do some legit gaming, so I splurged and bought a GTX 560ti 448 core and an appropriate PSU upgrade. Installing everything was no problem, but it turns out that the Vostro 460 (and most other Dell prebuilts from what I can see) have NO intake fans. They are all cooled with passive airflow from vent holes on the front and side.
Welp I was gaming at ultra settings, but it turns out my GPU was running at 90 degrees celcius when doing so! I wasn't going to let my awesome card melt so I bought a 120mm fan and a Dremel tool to do some "modding". I carved out a hole on the side of my Dell directly over the GPU and attached the fan as a side intake fan. It dropped my temps to 85 degrees while gaming. Ugggg still not good.
I finally manned up and researched mATX cases, and found the NZXT Vulcan. At the time I only chose it because it is a sweet looking case. I transplanted my entire Dell mobo and everything else over to the new case (along with a huge 200 mm side fan cause goddamnit I'm not lowering my graphics settings). This process made me super nervous, but I managed up until I realized that prebuilt computers have a proprietary front panel connector pinout on the motherboard.
I had no idea where to plug in the Vulcan power connector on the mobo. Hours of Googling turned up very little information, and I finally figured out that I could look at the old case's power button and trace the two cables back to the pins on the motherboard. Bam! I guessed which side was positive (it turns out this doesn't really matter) and the computer powered on!
From now on I will never be buying a prebuilt again because I essentially built this whole computer piece by piece via part upgrades (except the CPU). The Vulcan is an amazing case that I have already told a few friends about who are looking to build for D3. I have a feeling my future builds will all be mATX and most likely in more Vulcans lol (unless NZXT releases a newer mATX case). My favorite part of the case is the built-in fan controllers -- this is a ridiculous quality of life feature that I can no longer live without going forward. Rob also provided great support on a matter I had with my case.
I now happily game on a computer that has the soul of a Dell Vostro, crushing ultra settings at a nice 70 degrees (this card runs hot as hell apparently).
TL;DR Bought a prebuilt Dell before finding r/buildapc, ended up spending a ton to upgrade everything piece by piece including an NZXT Vulcan case. Am now wiser for the experience and will master future builds.
Thanks for the tip! You just saved me a couple of bucks!
Also, for the PWM splitter, I saw these
https://www.amazon.com/JBtek-Black-Sleeved-Splitter-Computer/dp/B01GZPEQW6/ref=sr_1_13?ie=UTF8&qid=1519908850&sr=8-13&keywords=pwm+fan+splitter
https://www.amazon.com/Rosewill-Splitter-Duplicator-Converter-Adapter/dp/B01N0XQ7XC/ref=sr_1_3?ie=UTF8&qid=1519908850&sr=8-3&keywords=pwm+fan+splitter
https://www.amazon.com/Phobya-3-Way-Splitter-Single-Connection/dp/B004CLFOK4/ref=sr_1_4?ie=UTF8&qid=1519908850&sr=8-4&keywords=pwm+fan+splitter
Which of them would be the best one?
Bump for Demcifilter, I got one for my s340 elite and it works great, nice, very fine mesh.
Specifically this one, https://www.amazon.com/dp/B003U3TP6Y/ref=cm_sw_r_other_apa_BTisybYD74S0W
it's magnetic so it sticks to the case nicely.
You could try something like Novus Plastic Polish (change the .com to .de , .co.uk , or whichever you prefer using in Sweden). Honestly not sure if it will remove those fine scratches though or if even using it with a microfiber cloth would make it worse. May be worth a shot though if you don't want to pay to have a replacement shipped.
If it doesn't work/gets worse, I'd recommend mnpctech's replacement window. High quality acrylic that won't scratch nearly as easily. They do international orders via email and paypal so I'm not sure how much it would end up being for you...
If you have the room you can possibly use a 120mm to 140mm fan adapter. This should help: Bgears Cooling Fan Adapter 140mm-Black Black https://www.amazon.com/dp/B0043GMY1U/ref=cm_sw_r_cp_api_lZLazbP7VRWAX
That fan is a MegaFlow 200mm Blue LED fan. You can get it here at Amazon for $15. Thanks for the reminder that I need to flip it into exhaust :P
You probably will not be able to get the nice cable clips, but there are velcros out there...
https://www.amazon.com/VELCRO-Brand-Black-2-Inch-91140/dp/B001E1Y5O6
The S340 elite offers some nice cable clips...
I used this until I got mine. Not the prettiest, but it works.
Tornado 00520 Large J-Hook https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_cp_apa_ommryb6GKKK7C
It's a garage ladder hook lol
Thanks for the reply, would this work? Phobya Adapter Cable, 4-Pin Molex to 4-Pin (PWM), 30cm, Sleeved, Black https://www.amazon.com/dp/B004X2XBMA/ref=cm_sw_r_cp_apa_1QZ-Bb2CEDYE6
If so, what does that do again what where would I plug it into?
How about a right/left angled cable? Something like this.
You might also try contacting NZXT directly. I'm not familiar with Threadripper motherboards, but if yours has a fairly standard layout, then NZXT should be able to provide some assistance.
The hue+ doesn't have UV I don't think, or atleast mine doesn't or I can't find it anywhere. Anyways if you're alright with the cathodes these should do the trick for your UV needs http://www.amazon.com/LOGISYS-CLK12UV-inch-Cathode-Light/dp/B000JQ17WK
Gonna need one of these if you want to connect it.
Silverstone CP14
You need an adapter to do so, like this one, http://www.amazon.com/Cable-Adapter-4-pin-Female-Sleeved/dp/B00AR3B77A
ya exactly your going to need some adapters to implement those fans into your build with the grid+. I went ahead and supplied a link to as an example http://www.amazon.com/Cable-Adapter-4-pin-Female-Sleeved/dp/B00AR3B77A/.
http://www.canadacomputers.com/product_info.php?item_id=031618
http://www.amazon.com/Vulcan-Enthusiast-M-ATX-Handle-VULCAN/dp/B003IPOYGK
http://www.ncix.ca/products/?sku=53700
http://www.canadapost.ca/shopper/items/3400549/NZXT-Vulcan-mATX-Mini-Tower-VULCAN
You mean this or this?
I used this (http://www.amazon.com/gp/product/B000UVCK9S/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1)
I soldered on a molex plug because it just runs off of 12v.
Naw. Interstellar's on the list, but that's mostly because Christopher Nolan would probably be a terrible fucking author. And I saw The Wind Rises partly because this is one of my favorite books.
sorry to disappoint you, it is merely a Grifiti Fat Wrist Pad