(Part 2) Top products from r/StandingDesk
We found 26 product mentions on r/StandingDesk. We ranked the 68 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
21. FEZIBO Standing Desk Anti Fatigue Mat Wooden Wobble Balance Board Stability Rocker with Ergonomic Design Comfort Floor Mat (Medium, Obsidian Black)
Sentiment score: 1
Number of reviews: 1
【ERGONOMICALLY ENGINEERED DESIGN】The standing mat combine theory of Anti-fatigue with balance trainer remains steady with an 8.5° tilting angle. Keeps your legs, core, and body active to help improve focus, reduce fatigue, and relieve foot tension. Get the real benefit of standing!【INNOVATIVE...
22. Mount-It! Dual Monitor Mount | Double Monitor Desk Stand | Fits 2 Computer Screens 19 20 21 22 23 24 27 Inches | C-Clamp and Grommet Base | Heavy Duty Full Motion Arms | VESA 75 100 Compatible
Sentiment score: 1
Number of reviews: 1
DUAL MONITOR MOUNT: Fits 2 computer screens 13 15 17 19 20 21 22 23 24 27 inches, with a maximum support weight of 22 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. (measure bolt hole distance in millimeters if unsure of size)FEATURES: Du...
23. DANCO Waterproof Silicone Faucet Grease | Silicone Sealant | Plumbers valve Grease for O-rings | 0.5 oz. | 1-Pack (88693)
Sentiment score: 1
Number of reviews: 1
PLUMBERS FAUCET AND VALVE GREASE Ideal for lubricating faucet stems valves and cartridges when repairing a leaky faucetLUBRICANT GREASE Contains high raw silicone content making it better for long term lubricant hold & helps hard-turning faucets work smoothlyNSF 61 APPROVED designed for use as a wat...
24. 3M Under-desk Computer Tower CPU Holder, Width Adjust from 3.5" to 9.3", Height Adjust from 12.5" to 22.5" to Fit Most CPU's up to 50 lbs, 360⁰ Swivel, Steel Construction, 17" Track, Black, (CS200MB)
Sentiment score: 1
Number of reviews: 1
Mounts CPU to underside of work surface on 17 in track for easy access and keep it off the floor or desktop freeing up space360 degree swivel ensures easy access to cables and ports at back of CPUWidth adjusts from 3.5 in to 9.3 in and height adjusts from 12.5 in to 22.5 in to fit most CPU'sSturdy ...
25. HON Metal Keyboard Platform, Black
Sentiment score: 1
Number of reviews: 1
Designed to place your keyboard and mouse pad in the most comfortable, convenient positionKeyboard can be installed at one of four pre-set heights to improve wrist and forearm alignmentPlatform surface is positioned 3" below bottom of worksurfaceThe non-articulating platform glides smoothly on steel...
26. Safco Products Metro Extended Height Chair , Ergonomic, Pneumatic Height Adjustable, Heavily Padded
Sentiment score: 0
Number of reviews: 1
ERGONOMIC, PADDED DESIGN. Safco Metro Extended-Height Chair features a form-fitting contoured back and thickly cushioned seat for all-day comfort.HEIGHT ADJUSTABLE. Pneumatic lever under seat provides easy height adjustment from 23" to 33" for a personalized fit. Seat rotates 360 degrees for ease of...
27. Safco Metro Adjustable Arm Kit, Black
Sentiment score: 0
Number of reviews: 1
CHAIR ACCESSORY. Chair Arms for Safco Metro Extended-Height Chair fit chair model 3442, sold separately.HEIGHT-ADJUSTABLE. Chair arm set features 3" height adjustment range for individual comfort.DURABLE DESIGN. Constructed with tough polyurethane for years of reliability.Manufacturer Limited Lifeti...
28. Vibra-TITE 122 Oil Tolerant Removable Anaerobic Threadlocker, 10ml Bottle, Blue
Sentiment score: 3
Number of reviews: 1
Lock and seal threaded fastenersStop fasteners from loosening from shock and vibrationPerforms better than lock washers, bevel washers and other forms of mechanical locking devicesAlleviates rust-lockPrevent leakage
29. Stanley 31610 SurgeMax Pro 9 Outlet Metal Surge Protector, Black
Sentiment score: 1
Number of reviews: 1
Country of Origin: CHINAThe Package Length of the product is 12.6 inchesThe Package Width of the product is 6.6 inchesThe Package Height of the product is 12.1 inches
30. Linon 29-Inch Barstool With Round Seat
Sentiment score: 0
Number of reviews: 1
Crisp; natural finishSolid wood legsVersatile Design29" seat heightSolid and durable construction
31. Loctite 1330799 Threadlocker 243 Surface Insensitive-Medium Strength Tube, Blue, 6-ml
Sentiment score: 1
Number of reviews: 1
DESIGN. Ideal for fasteners between 1/4-Inch to 3/4-Inch (6 mm to 20 mm).APPLICATION. Rocker studs, rocker adjustment bolts, bolts on valve and cam covers, oil pans, disc brake calipers, intakes and alternators, pulley assemblies and much more.Fit type: Vehicle SpecificSECURE. Locks and seals while ...
32. MonMount Dual LCD Monitor Stand Desk Clamp Holds Up to 24-Inch LCD Monitors, Blue (LCD-194BL)
Sentiment score: 0
Number of reviews: 1
Designed by MonMountHolds up to 24 Inch Wide LCD MonitorsFully adjustableVESA 75mm and 100mm CompatibleEasy to install with Desk Clamp
33. MultiTable The Original ModTable Hand Crank Standing Desk Adjustable Height Table Frame (Black)
Sentiment score: 1
Number of reviews: 1
Over 35,000 Sold Worldwide since 2010Highest rated reviews on AmazonHuman powered with minimal carbon footprintLonger lasting with fewer parts to wear out. As seen on TV.Two turns of handle raises and lowers your desk one inch (That's half of the industry average)
34. FURINNO Just 3-Tier End Table, 1-Pack, White/White
Sentiment score: 1
Number of reviews: 1
Simple stylish design yet functional and suitable for any roomMaterial: Engineered particle board, PVC Tubes.Featuring reversible two-tone both side lamination for one product two color options.Fits in your space, fits on your budget. Sturdy on flat surface 5-minutes no tools no hassles assembly.Pro...
35. MonMount LCD-194B Dual-Screen Monitor Mount with C-Clamp Desk Mount (Black)
Sentiment score: 1
Number of reviews: 1
Designed by MonMountHolds up to 24 Inch Wide LCD MonitorsFully adjustableVESA 75mm and 100mm CompatibleEasy to install with Desk Clamp
36. VIVO Single LCD Monitor Desk Mount Stand Fully Adjustable/Tilt/Articulating for 1 Screen 13" to 27" (STAND-V001)
Sentiment score: 1
Number of reviews: 1
FITS 13" TO 27" SCREENS - Single monitor mount fitting most screens 13” to 27” in size and 22 lbs in weight with 75x75mm or 100x100mm backside mounting holes. Mount to your desk with heavy duty C-clamp or optional grommet.ARTICULATION & HEIGHT ADJUSTMENT - Adjustable arm offers +80° to -90° ti...
37. VIVO Single Laptop Notebook Desk Mount Stand - Fully Adjustable Extension with C Clamp (STAND-V001L)
Sentiment score: 1
Number of reviews: 1
COMPATIBILITY – The ventilated 14” x 12” tray is designed to fit most laptops and supports weights up to 22 lbs. Mount to your desk with heavy duty C-clamp or optional grommet mountFULL ARTICULATION – Adjustable arm offers 15° tilt, 180° swivel, 360° rotation, and height adjustment along ...
38. Vertdesk 30" x 60" Electric Adjustable Height Desk (Hardrock Maple with Black Base)
Sentiment score: 1
Number of reviews: 1
Push button control for easy height adjustmentLarge height adjustment range of 28" to 46.5"Standard lifting capacity of 200 lbs.Quick and quiet adjustment speed of 1.1" per secondSturdy even when at standing height with strong cross bar
39. VIVO Black Fully Adjustable 13 to 32 inch Single Computer Monitor and Laptop Desk Mount Combo, Stand with Grommet Option, Fits up to 17 inch Laptops (STAND-V002C)
Sentiment score: 0
Number of reviews: 1
COMPATIBILITY - Single monitor mount fitting most screens 13” to 32” in size and 22 lbs in weight with 75x75mm or 100x100mm backside mounting holes. The vented tray holds laptops up to 17”. Mounts to your desk (up to 4" thick) with heavy-duty C-clamp or optional grommet mount.FULL ARTICULATION...
Yea it sure was stressful trying to make the right choice. I have pages and pages of notebook paper with option/cost comparisons, review notes, my own thoughts etc. It looked like a crazy person trying to shop or something lol.
Read the instructions and watch/follow the installation video on their site. The video was a lot more helpful than the instruction manual. Setup is pretty easy but be sure to listen when they say how to tighten your bolts. A lot of them you will start the thread on 4 screws then tighten them down in a rotating cross-pattern like you would do with car lug nuts or when tuning a drum head. Make sure when you do tighten the screws they are snug.
Per the recommendation of some, I also used a Blue Medium strength Oil tolerant
Non-Permanent thread locker on all the machine bolts. I used Vibra-tite 122 since it was the cheapest of the 3 big brands. Looks like it out of stock on Amazon but Loctite and Permatex both make a version as well. Loctite is #243 found here. I got the Oil and material insensitive types because the bolts do come with a slight oil and I was unsure of the exact metal makeup. I let the desk sit for about 4 hours after I finished building to let the threadlocker cure some. The full cure time is 24hrs. The result is an extremely stable desk while sitting and standing alike. Even trying to push on it at 43inch height and it is hard to get it rocking. Definitely doesn't even come close to messing with your work.
O I understand the space issue. 72in is really my max and it fits just perfect in my office. There is a clearance 48in maple laminate top still available that will save you ~$50 or so.
No problem at all and I'm happy to answer any questions you have. I know how hard it is to find some good info on these things and it is a huge investment. Hope you enjoy the desk. I know I sure am! :D
I wanted to share a couple pictures of the desk set up and also some of the accessories I purchased. My expirience with Fully was great. I got the Jarvis3 with Walnut veneer in a72x60 size. The frame was delivered about 3 days later and the desk top about a week after purchase. The quality is everything I expected! This thing is heavy and stable at all heights. I love this desk!
Pics:
https://drive.google.com/file/d/1E7Vi_PN-sxrfnujw9ZgXZTnQwUT8dTyeLA/view?usp=sharing
https://drive.google.com/file/d/1LBK9sdiy9oULc-dOgY7ElnAcd45jkCCloQ/view?usp=sharing
https://drive.google.com/file/d/1L56J3IP3A9cVEiPSgyNNANwCjJIY4P3blA/view?usp=sharing
https://drive.google.com/file/d/1N0TaD-U1OJlcw7mq8sihXH_obmELsdRv6A/view?usp=sharing
https://drive.google.com/file/d/1Mw-c-78JU_MAIraOlL56jLZuFK-l0lQMDA/view?usp=sharing
Accessories
I decided to get the keyboard tray and accessories from Amazon. The keyboard tray is probably going back because it is difficult to move back and forth.
Keyboard Tray Here: https://www.amazon.com/gp/product/B01M2319VR/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
The Anchor: https://www.amazon.com/gp/product/B00P31BMHG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Wiretamers: https://www.amazon.com/gp/product/B01BVYW7UY/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
VESA adapter for old Samsung Monitor: https://www.amazon.com/gp/product/B071YFDQKS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Dual Monitor Mount: https://www.amazon.com/gp/product/B018MSDG84/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Clips for wire management: https://www.amazon.com/gp/product/B071L91LBH/ref=oh_aui_detailpage_o03_s02?ie=UTF8&psc=1
Long Power strip: https://www.amazon.com/gp/product/B0036DEC48/ref=oh_aui_detailpage_o03_s03?ie=UTF8&psc=1
Bankers boxes are incredibly useful.
I plan to get something better to hold my laptop eventually. But the lid on the box holding my monitor was slooowly beginning to cave, so getting a monitor stand was priority #1.
If you're curious, this is the end table I'm using as a monitor stand. It happened to be the perfect height for me.
Not as swanky as one of those $1000 adjustable height desks. But it works for me.
Not sure what your budget is but you can buy standing desk frames. The frames allow you to install your own table top. Take a look at:
http://www.geekdesk.com/geekdesk-v3-frame-only
http://www.amazon.com/dp/B005MR5YA2?psc=1
Like i said, it will depend on budget but this is one option.
I have a 34” wide screen mounted to my standing desk, and I use a dual monitor gas shock articulating arm system (the other monitor is a vertical 27”)
The main issue I see with it is that the monitor is so wide that it’s hard to keep it perfectly straight, it has a weird “center of balance” which makes it rotate on the mount very easily, I can only imagine this would be even more pronounced for you.
Id probably recommend a single monitor mount for you.
This is the standard one;
VIVO Single LCD Monitor Desk Mount Stand Fully Adjustable/Tilt/Articulating for 1 Screen 13" to 27" (STAND-V001) https://www.amazon.com/dp/B00B21TLQU/ref=cm_sw_r_cp_api_i_fudoDbWEGEV6Q
This is the articulating one, which may give you rotation issues (although maybe it’s just me).
VIVO Height Adjustable Single Monitor Arm, Fully Articulating Counterbalance Pneumatic Desk Mount | Universal VESA Stand for Screens up to 27 inches (STAND-V001O) https://www.amazon.com/dp/B01NH0HTM5/ref=cm_sw_r_cp_api_i_qvdoDbEBCE68Y
Pretty sure it’s a VertDesk.
https://www.amazon.com/gp/product/B0010SY3L8
Is this the holder you were looking at? I have a SmartDesk 1 and I drilled this into the back-right side and it works perfectly. If you PM me, I will send you a picture of it when I get home from work.
Fully extend the legs in the up position.
Apply some lubricating grease - lightly.
Use something similar to this: https://www.amazon.com/dp/B000DZFUPC
Lower and raise a few times. See if that helps.
If it doesn't work, Ryan is always stalking the forum and can sell you a new frame.
P.S. Also, don't just google "lubricant". At least not from work.
I think if you get a higher desk you'll find you still lean in on the laptop monitor. I don't like the desktop converters that you link to personally. I always find them awkward to use regularly. I have clients with them and avoid those cubes when possible.
Like others have suggested, get an external keyboard and mouse. Then get yourself either a laptop stand that will bring the screen up to a better height for you, an external monitor that will give you a bigger screen/better height, or a stand that will hold your laptop and an external monitor giving you two functional screens.
It's rock solid and would definitely purchase it again.
HON 4028P Underdesk Oversized Keyboard Platform/Mouse Tray, 30 x 10, Black https://www.amazon.com/dp/B001MS6T1I/ref=cm_sw_r_cp_apa_i_ARroDb480D5P3
Here's the link to the actual product page on Amazon without the affiliate link. Here's the direct link to Amazon with OPs affiliate link but skipping the Twitter nonsense.
Also, here's the Camelcamelcamel link, showing this is normally $70, so this is actually a great deal.
I would get something like this https://www.amazon.com/Conntek-Gauge-Outdoor-Extension-Cords/dp/B00GGGNKUY
12 guage should be fine but i wouldnt go lower!
I've been using the Safco chair with arms to pretty good effect. It's not the most comfortable chair in the world, but I consider that a pro because it motivates you to stand up after a decent amount of time.
Don't get too comfy a chair for sitting at standing height. I did that at work and now I end up sitting 100% of the time instead of using it for breaks. I'm considering a wooden stool for my home setup:
https://www.amazon.com/29-Inch-Barstool-With-Round-Seat/dp/B0048V7FGO/ref=sr_1_7?ie=UTF8&qid=1496884988&sr=8-7&keywords=wooden+stool
using this https://smile.amazon.com/gp/product/B00FOTABWY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I have the pole to the right near where one of the under desk frame pieces makes a T.
I then switched the monitor and laptop arms, so the monitor is in the center of the desk with the long arm.