Reddit reviews BLACK+DECKER RTX-B 3 Speed RTX Rotary Tool with Storage Case
We found 13 Reddit comments about BLACK+DECKER RTX-B 3 Speed RTX Rotary Tool with Storage Case. Here are the top ones, ranked by their Reddit score.
Includes: RTX Speed Rotary Tool; 5 Accessories; Storage Bag; User Guide; WrenchExclusive Flip-Lock spindle lock system for quick and easy accessory changes, eliminates need to hold down awkward button.Universal collet system accepts all standard rotary tool accessoriesPowerful, high torque motor (twice the power and torque of the leading competitor) completes jobs faster, won't bog down under load3 speed (12,000/24,000/30,000 RPM) for maximum precision in all applications
Amazon sells a nicer black and decker for only $30 http://www.amazon.com/Black-Decker-RTX-B-3-Speed-Rotary/dp/B000MUSLCC
Less attachments, but I used one for ~5 years before I lost it
Just get a black and decker or harbor freight model, they all do the same thing and most are compatible with most dremel brand tooling.
This is what I use and have cut a lot of metal with it, still holding up.
http://www.amazon.com/Black-Decker-RTX-B-Rotary-Storage/dp/B000MUSLCC/ref=sr_1_1?ie=UTF8&qid=1341409647&sr=8-1&keywords=black+and+decker+rotary+tool
Honestly, get a Black and Decker RTX. I had a Dremel for 15 years, LOVED it. IT's a fucking fantastic tool, probably the most used in my garage, (which includes a table saw, chop saw, router and table, RO sander, finishing sander, multiple drills, circ saw, etc. etc. etc. I have a lot of tools).
But then it died, and my sis got me an RTX. It's got a more powerful motor than even the most expensive current Dremel, (two point something amps, IIRC). It's got a really nice hands-free bit changing mechanism. It's infinitely variable, (Even though it says "3 speeds) in speed up to the max.
I've used current wired and wireless dremels, (get a wired one, by the way...much more juice), and my RTX beads them hands DOWN.
First thing that amazed me was the instant spin up time. With that powerful of a motor, when you switch it on, it's instantly doing 35,000 RPM. It's nuts. Don't let the low price make you think it's cheap. It is one SOLID tool.
Black and Decker RTX http://www.amazon.com/Black-Decker-RTX-B-3-Speed-Rotary/dp/B000MUSLCC/ref=sr_1_1?ie=UTF8&qid=1372710581&sr=8-1&keywords=black+and+decker+rtx
Takes all the dremel accessories and is cheap.
If you don't mind, I'd actually advise picking up one of these: http://www.amazon.com/Black-Decker-RTX-B-3-Speed-Rotary/dp/B000MUSLCC/ref=sr_1_1?ie=UTF8&qid=1416532678&sr=8-1&keywords=Black+and+Decker+dremel
The motor is higher quality and higher amps than a Dremel, so it lasts longer, and wont burn it's self out if you start using it. Uses all the dremel accessories too! :)
Yes tiny details can be hard! Depending on how small it's going to be, my suggestion would be to use a nail file and/or a dremel. Epoxy may not be needed for small things like that.
No worries happy to help.
As far as a dremel goes, I got this and this to take Dremel tips. It works amazing.
More like 30, a million is a bit of stretch too, I'd prefer an angle grinder myself.
http://www.amazon.com/Black-Decker-RTX-B-3-Speed-Rotary/dp/B000MUSLCC/ref=sr_1_6?ie=UTF8&qid=1376520055&sr=8-6&keywords=dremel
Make sure to get one with variable speeds. I use mine a lot, so the finer control comes in handy. If you just need a tool that will get the job done, Black & Decker make the 3 speed RTX-B for about $30 and it works great.
More important in this case though is to have a proper plastic cutting/shaping tool. The trick with plastic is removing the material without melting all of it. They make special cutting bits for wood and plastics, which honestly I wish they'd made a lot sooner. It'll still melt some of the softer plastics if you go too fast but is miles ahead of the high-speed steel cutters..
I use a black and decker dremel knockoff. It's bulkier, but seems pretty well built and is about half the cost. Works with dremel accessories too. https://www.amazon.com/Black-Decker-RTX-B-3-Speed-Rotary/dp/B000MUSLCC
I use a Dremel 4000, but you can probably get away with some Black and Decker for most jobs.
If you're doing straight cuts, I actually just use a fine tooth saw to make the cuts, sand down with sandpaper, and let the paint cover up everything else smoothly.
Wear a mask when cutting the plastic up and work in the garage.
I got a Black and Decker rotary tool last October and its amazing, variable speeds up to 30,000 rpm. it was a gift but purchased from target for around $29.99+Tax Than picked up a 249 piece attachment kit from harbor freight for $21.99+ tax
So far it has handled every task I've had from sanding wood pipes to carving channels for air flow. Even a few sculptures. The links below is exactly what I'm working with.
http://www.amazon.com/Black-Decker-RTX-B-3-Speed-Rotary/dp/B000MUSLCC
http://www.harborfreight.com/249-piece-rotary-tool-accessory-set-93243.html
It's not quite $15, but I have one of these and it's built like a tank and really powerful for the price.
https://www.amazon.com/Black-Decker-RTX-B-3-Speed-Rotary/dp/B000MUSLCC