Reddit reviews BUD Industries NBF-32016 Plastic ABS NEMA Economy Box - Electrical Box for Indoor Uses - Industrial Box in Light Grey Finish with Solid Door Construction. Conduit and Fittings
We found 7 Reddit comments about BUD Industries NBF-32016 Plastic ABS NEMA Economy Box - Electrical Box for Indoor Uses - Industrial Box in Light Grey Finish with Solid Door Construction. Conduit and Fittings. Here are the top ones, ranked by their Reddit score.
Safe Economy Box: plastic indoor electrical box provides superior protection as it is certified to IP66 of IEC 529. Listed to NEMA 1, 2, 4 and 4x specifications, industrial economy box conforms accurately to the safety standardsApplications: heavy-duty economy box is a suitable choice for project boxes or internal junction box applications. Ideal for indoor uses, NEMA economy box can be employed for a variety of applications, ranging from industrial equipment to medical devicesDurable Industrial Box: crafted from high-quality plastic, wall mounting box is highly sturdy. Included gasket provides protection from dirt and water ingress for smooth functioning. Stainless steel hardware ensures resistance to corrosionWall Mounting Enclosure: economy box is easy to install and comes with stainless steel wall mounting brackets and other hardware for external mounting. For the internal mounting, industrial enclosure features an internal plate and mounting bossesSpecifications: solid in construction, industrial box with light grey finish measures 11-51/64 in. (l) by 7-55/64 in. (w) by 5-7/64 in. (h) externally and 11-11/64 in. (l) by 7-3/16 in. (w) by 4-13/16 in. (h) internally
So here's my project I've been working on for the past couple of weeks. I'm sure you can adapt this to a 2 motor lift setup (just add 4 more relays), or to another AC motor appliance. Here are the links for the key parts from Amazon:
Remote -$10.00
Relays -$7.00 x 4
Power Switch -$6.55
Box -$18.50
The whole thing came to about $75 and that's compared with $400 for a commercial one.
Edit: added the links for the parts
Edit 2: Correction to diagram
/u/SpaceDurr did a full write up of his first bucket build, but the attached box is this
I attached one of these to the exterior of my house: https://www.amazon.com/BUD-Industries-NBF-32016-Plastic-Economy/dp/B005UPANU2. Weather stripping between the box and wall. Then ran a ~1.5" section of PVC through a similarly sized hole in the wall. I used threaded PVC so I could put flange inside the box to keep it tight against the weather stripping. Oh, yea, sealing the PVC to the siding with some silicone sealant (spray foam would work too, just didn't have any on hand).
http://imgur.com/LZ6mnZx (yes, I know, I still need to connect that arrestor to a ground rod)
Haha cool. I thought it looked familiar. I just spent the last few days ordering a bunch of parts including boxes.
I almost ordered the one you have, but decided on one with a hinged lid and latches. https://www.amazon.com/gp/product/B005UPANU2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.google.com/webhp?q=nema+enclosure#q=nema+enclosure&safe=off&tbm=shop
Lots of options for cheap, also check Amazon/eBay.
$20, but not sure if big enough:
https://www.amazon.com/BUD-Industries-NBF-32016-Plastic-Economy/dp/B005UPANU2/ref=sr_1_1?ie=UTF8&qid=1491863938&sr=8-1&keywords=nema+enclosure
I used these
Box - https://www.amazon.com/gp/product/B005UPANU2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Box Insert - https://www.amazon.com/BUD-Industries-NBX-32916-PL-Plastic-Internal/dp/B005UPE83U/ref=pd_bxgy_328_img_2?_encoding=UTF8&pd_rd_i=B005UPE83U&pd_rd_r=38ca7968-edbf-11e8-8842-7d002f82d6fa&pd_rd_w=A8lwS&pd_rd_wg=QT89F&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=6725dbd6-9917-451d-beba-16af7874e407&pf_rd_r=JFVRZXED3FN2MWQ13E95&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=JFVRZXED3FN2MWQ13E95
​
Works great. There are no punch outs or anything so I drilled my own holes and used these water proof strain reliefs. https://www.amazon.com/Lantee-Cable-Gland-Waterproof-Connector/dp/B07BGVV8N1/ref=sr_1_3_sspa?s=hi&ie=UTF8&qid=1542826797&sr=1-3-spons&keywords=waterproof+gland&psc=1 Just make sure your cables will fit through the gland nuts.
This is the one I used: https://www.amazon.ca/BUD-Industries-NBF-32016-Plastic-Economy/dp/B005UPANU2/ref=sr_1_2?keywords=weatherproof+box
I have an Eve remote temp/humidity sensor in the box, and it doesn't hit more than 33C on hot days (it's not in direct sun). You could always add a small PoE fan and cut out a hole (add a screen) in the back.
EDIT: You'll also need some of these: https://www.amazon.ca/Zilong-Waterproof-Adjustable-3-5-13mm-Glands/dp/B076C83P21