Reddit reviews Glass Bottle Cutter, AGPtEK Bottle Cutter Cutting Machine, Wine Bottles Beer Bottles Cutter Glass Cutter Cutting Tool
We found 3 Reddit comments about Glass Bottle Cutter, AGPtEK Bottle Cutter Cutting Machine, Wine Bottles Beer Bottles Cutter Glass Cutter Cutting Tool. Here are the top ones, ranked by their Reddit score.
Super Easy and Convenient: Check the detailed description below. The bottle cutter features sharp blades to cut perfect score line. Take 4 STEPS to make your own artwork.Cut Any Straight Round Glass Bottles: The length/height slide adjustment for making the cut is 2" to 8.3"(leaving you with cup 2" on up to 8.3").The width spread between the cutting die and support roller is 0.5” to 2”.Smoothly Cutting: The results will amaze you,clean breaks nearly every time.The cutter owns 3 cutting blades in a disc, each blade is made of sharp and hard metallic steel.Long Lasting: The durability has been tested by 50000 times cutting and still works great.Even thick champagne bottles break easily and smoothly.Helpful Hints: You may can't get a perfect cut at the fist use,so we have the E-BOOK for you to read. If you have any further questions, we are always here to solve your problems.
We wanted to do candles in wine bottles for our centerpiece but our venue won't let us do uncovered flames. As a workaround we decided to go with something like this where the candles are inside the bottle.
Of course this meant cutting the bottoms off of nearly 100 bottles, which meant
exploiting our friends for free laborhours of work delabling, washing, scoring, and cutting the bottles.The whole process was pretty smooth, but pretty labor intensive. The scorer worked like a charm but it takes a bit of practice to get a straight score. Still we did lose about 12 bottles but we had plenty of extras as we've been begging our friends and families for all their discarded wine bottles for the last year.
If this is something you're interested in for your wedding here are the tools we used:
https://www.amazon.com/AGPtek-Bottle-Machine-Cutting-Bottles/dp/B0155WMTGU/ref=sr_1_3?ie=UTF8&qid=1475268871&sr=8-3&keywords=bottle+cutter
https://www.amazon.com/Bottle-Cutter-Genround-Machine-Cutting/dp/B01EG6TP9A/ref=sr_1_4?ie=UTF8&qid=1475268871&sr=8-4&keywords=bottle+cutter
The one in the second link works slightly better but they were both decent. Basically all you have to do is score the bottle ONCE around in a straight line, then dunk it in hot near boiling water then ice water back and forth. After a dunk or two it splits right along the line.
I Cut the bottom off of 50+ wine bottles for wedding table decorations. The best method we came up with was using a glass cutting tool here
We tried a blow torch to heat the cut and it dip it into an ice bath. It was ok. What worked best was low boiling water and an ice bath. Place the bottle in up to the cut and then dip into water. Gave a nice clean break. The cut doesn't need to be deep at all. The shallow cuts broke better because we didn't put as many micro cracks into the glass.
How did you get your bottles cut so clean? I tried the Kinkajou cutter and the this one but I can't get consistent results. Any tips?