Reddit reviews Green Stuff (4"Strip) RPR 75006
We found 4 Reddit comments about Green Stuff (4"Strip) RPR 75006. Here are the top ones, ranked by their Reddit score.
4" strip
We found 4 Reddit comments about Green Stuff (4"Strip) RPR 75006. Here are the top ones, ranked by their Reddit score.
epoxy putty like milliput or green stuff or even JB Weld. First use a bit to make an imprint of the pattern of the plastic (use some plastic wrap so it doesn't stick to the car, or if you're a pro, use a mold release agent, or vaseline on the car part, press the putty on the plastic and let it harden) then fill the hole with some of the putty and use the pattern mold you made to press it flat.
Should come out pretty close. You may need to remove the part to put tape behind it to help keep the putty from squishing through the holes too much.
I was able to assemble my entire core set plus 11/12 expansions with these items:
https://www.amazon.com/gp/product/B0006N6ODS/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
and
https://www.amazon.com/gp/product/B01D1JYXKO/ref=oh_aui_detailpage_o06_?ie=UTF8&psc=1
The clippers are still going strong and the files work nicely. I have no mold lines or excess glue on my minis and I filled in some gaps with green stuff:
https://www.amazon.com/Green-Stuff-Strip-RPR-75006/dp/B001BR8AU8/ref=sr_1_10?ie=UTF8&qid=1498688095&sr=8-10&keywords=Green+stuff
You can usually find it a bit cheaper. Hopefully, that helps!
MAGNETIZED!!!
Seriously do it. It is not that hard. I used a thin drill bit and very carefully drilled out holes on the minis to put the magnets. then I used green stuff in the hole and did a thin coat over the hole, so the magnet stays there. They are pretty strong. I will make a video when I get home to show you.
the air will dry it out and make it very hard to work with. its like $8 so id just get some more. no need to make working with it harder than normal for $8. http://www.amazon.com/Green-Stuff-Strip-RPR-75006/dp/B001BR8AU8