Reddit reviews Isolate It: Sorbothane Vibration Isolation Circular Pad 50 Duro (.25" Thick 2.25" Dia.) - 8 Pack
We found 13 Reddit comments about Isolate It: Sorbothane Vibration Isolation Circular Pad 50 Duro (.25" Thick 2.25" Dia.) - 8 Pack. Here are the top ones, ranked by their Reddit score.
HARDNESS: These are available in 30, 50, and 70 durometers. The softer durometers have lower weight load ratings.VERSATILE: With a size range of 0.25"x 1" to 1" x 4" and load rating of 4.3lbs to 500lbs, they help absorb impact and noise in numerous applications.USES: They can be used as feet, stops, spacers and protectors in many different applications and industries.QUALITY: The unique urethane material won't crack, dry, scratch or mar surfaces and comes with a durable Sorbothane surface to maintain their structural integrity.INSTALLATION: Simply position the Sorbothane vibration isolation circular pads and press it into place.
Quality is basically the same on the prints that I have done. I'm finishing a project right now but then I will print another benchy.
Isolate It: Sorbothane Vibration Isolation Circular Pad 50 Duro (.25" Thick 2.25" Dia.) - 8 Pack https://smile.amazon.com/dp/B0042U8P9C/ref=cm_sw_r_cp_apa_i_OUXCCbQTEHRBE
From the pic, looks like the feet are connected to the shelf pieces but not the desk itself. That's a good choice in case you ever need to adjust move the stands.
You might consider ordering some sorbithane pads to place between the feet and desk, to make them anti-skid and to eliminate any vibrations caused by uneven contact. Check Amazon, it should be fairly inexpensive.
Edit: https://www.amazon.com/gp/aw/d/B0042U8P9C/ $18.90 plus free shipping with Prime
You can help with the vibration by putting her bed and yours on sorbothane pads. Sorbothane is the brand name for really really soft rubber which will stop vibrations being transmitted through it.
You can measure "air vibration" with a microphone. Sound = vibrating air after all.
You can use an app on your phone to measure floor and ceiling vibration using its accelerators.
I put Sorbothane pucks under the stock feet and that damped out a lot of the vibrations/noise. https://www.amazon.com/gp/product/B0042U8P9C/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1
Note that that is exposed Sorbothane (looks and feels like a gummy bear) and can stain a surface. Just put Saran Wrap under it or 3D print a little cup to set them in.
Not very loud, after I put these under it: http://www.amazon.com/Isolate-It-Sorbothane-Vibration-Isolation/dp/B0042U8P9C/ref=sr_1_1?ie=UTF8&qid=1383223221&sr=8-1&keywords=isolate+it
I think my bookshelf speakers are slightly larger than average, basic 2 way speakers with a 6.5 inch midrange. My subwoofers are pretty big and heavy.
For normal listening and movies it isn't bad. But if you play something with really heavy bass the vibrations become noticeable. I'm still conflicted about the setup myself but I am not unhappy.
I purchased some cork from home depot to try to reduce vibrations and it is okay but not great
I think the next step is possibly some type of Sorbothane. Apparently it is amazing for isolation BUT you need to do calculations based on the weight of your speakers to determine exactly how much you need to use.
http://www.amazon.com/Isolate-Sorbothane-Vibration-Isolation-Circular/dp/B0042U8P9C/ref=sr_1_1?ie=UTF8&qid=1451966315&sr=8-1&keywords=isolate+it
Another alternative I am looking at is purchasing a set Isoaccoustics. They look like a gimmick but they got pretty good reviews, and they would also raise my bookshelfs to ear level.
http://www.amazon.com/IsoAcoustics-1004209-ISO-L8R155-Medium-Pair/dp/B008GOP79G
Post back if you end up with some solution. I'd love to hear it as I am in the same predicament.
That dresser is absorbing a lot too. You need stands or put some these sorbothane pucks under them.
Look up "speaker isolation pads". For example:
https://www.amazon.com/VIBRATION-ISOLATION-RIBBED-DAMPENING-QUANTITY/dp/B06XBQ1Q7P/
https://www.amazon.com/Isolate-Sorbothane-Vibration-Isolation-Circular/dp/B0042U8P9C/
I used http://www.amazon.com/Isolate-It-Sorbothane-Vibration-Isolation/dp/B0042U8P9C/ref=sr_1_1?ie=UTF8&qid=1410734079&sr=8-1&keywords=isolate+it%21+isolation+pads
I've had success with these: http://amzn.com/B0042U8P9C. I don't have a subwoofer, but my Play:5 was making stuff rattle, and these fixed that. YMMV.
Is it in high power mode? Also, what is your MK3 sitting on? I've noticed that hollow topped desks (like lack tables) seem to resonate and make the printer even louder. I put some sorbothane feet under my MK2, and that really made a difference. If you also put a heavy piece of stone under the MK3, that should help too. Doing both would probably help even more.
The other thing I did to reduce the sound of my printer was to replace all of the linear bearings with Igus style bearings. Those bearings are drop-in, so it was pretty easy to switch. They have made a huge difference. I used to be able to hear my printer from my bedroom, now all I can hear is the fan (time for a noctua).
Edit: spelling
Do you recommend an entire pad, or just using something like these just for the corners? Now I'm thinking about wallmounts where the speaker is sitting on a plane and using the sorbothane discs in the corners.
Take off the spikes and use these.