Reddit reviews Loctite 504469 Silver-Grade Anti-Seize Stick, 20-Gram
We found 2 Reddit comments about Loctite 504469 Silver-Grade Anti-Seize Stick, 20-Gram. Here are the top ones, ranked by their Reddit score.
Heavy-duty, temperature resistant, petroleum-based lubricant compound fortified with graphite and metallic flakeWill not evaporate or harden in extreme cold or heatUse during assembly to prevent seizing, galling and corrosionGreat for removal of spark plugs, cylinder head and exhaust head boltsNo modification required
Not just from prusa, pick and choose. URLs for examples.
Digital caliper, 12" https://www.amazon.com/gp/product/B000EJUBBU/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Extra brass nozzles.
Hardened steel nozzle, 0.4mm to 0.6mm for printing abrasive exotics (wood, glow in the dark, carbon fiber etc)
Print removal tool https://www.amazon.com/gp/product/B00VB1U886/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
Locktite blue bolt-fixer (Walmart, Home Depo, Lowes etc) to stop bed sensor from moving.
High temp anti-seize for nozzle threads https://www.amazon.com/gp/product/B0053ZS1Z8/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
Raspberry Pi 3, 5v Pi 2A Power wart, Micro SD card, & Webcam for octoprint monitoring.
Relay board for Pi/octoprint to power up & down printer remotely. https://www.amazon.com/gp/product/B0057OC5O8/ref=oh_aui_detailpage_o04_s02?ie=UTF8&psc=1
1lb of silica gel to keep filament dry.
Filaments, various.
Fire extinguisher rated for electrical fires.
Dedicated smoke alarm.
It's not difficult, you just need the tools to pull your current handguard off and remove the barrel nut (because most handguards comes with their own proprietary barrel nut). Then you'll thread on your new barrel nut, tighten it down to roughly 30ftlbs, install the new handguard, and you're done.
You'll probably need an AR15 armorers wrench, anti-seize/grease of some sort (I like Loctite Anti-Seize, but some people have heartburns over what to use. Something is better than nothing), and a torque wrench. And probably also another inch-lb torque wrench.
As for the quality of the handguard, I've never used that one, so I can't speak for it.