Reddit reviews MEGUIAR'S Ultimate Polish
We found 14 Reddit comments about MEGUIAR'S Ultimate Polish. Here are the top ones, ranked by their Reddit score.
Ultimate Polish pre-waxing glaze prepares your car’s surface for wax while offering deep reflections and high glossAchieve a glossy paint finish with conditioning oils that add depth of color and maximum shine before waxing, especially on dark-colored carsQuickly and gently removes fine swirls and towel marks for mirror-like reflectionsSafe on all glossy paints including clear coatsCan be effectively applied by hand or with dual action polisher like Meguiar's MT300 Dual Action Polisher
/u/jwinskowski please feel free to PM me at anytime for this. EDIT: if your tank is MATTE don't use products not designed for it! (Shampoo is fine for either)
TLDR rinse bucket and bucket with soap. use auto products. dont drop your MF cloths.
I'm not familiar with Guzzi's clearcoat so ill play towards the cautious side.
Personally I'd pick up a shampoo/conditioner and a basic wash mit thats microfiber made (attracts dirt better and wont mar your question)
(I can recommend 3D pink shampoo. cheap AND I love it)
next up a light compound (you can use meguiars ultimate compound. cheap inexpensive and hard to mess up) this brings out that POP in paint pretty easy to use with a hand applicator which are also cheap :)
next upppp paint polish. this is VERY subjective. I prefer mckees37 stuff but its more expensive than most like. I can also recommend meguiars ultimate polish. good and inexpensive :)
after wards you'll need a wax. meguiars ultimate liquid wax is a great starter and once again inexpensive. (I prefer trademark extender/policoat form mckees37) easy on easy off if you're taking you're time.
afterwards you can call it quits and bam you're done.
or keep going and seal your paint to keep that POP lasting. I HIGHLY recommend collinite 845 as its inexpensive as hell and STUPID easy to apply!!
also Mckees 37 SIO 2 ceramic coating is even easier but $.
then theres coatings. you can use something like Cquarts or even carpro....I personally juse use SIO2 from mckees37 currently. spray on wash off bam. not as effective but beyond stupid easy.
oh and also pick up some microfiber cloths of your choice. theres no right/wrong for them other than DONT DROP EM AND KEEP EM CLEAN.
links to products named
ultimate megs wax
ultimate polish megs
sio 2 coating 10% off ad warning
trademark extender wax spray
3D pink car soap/shampoo
collinite 845
ultimate compound megs
ultimate liquid wax -bigger AG carried
megs ult polish AG carried
Autogeek also price matches to a fair extent! and IF you're local you can pick up. :D
these microfibers are damn nice but $
I personally use these and they're lit. 16 pack and heavy duty enough to last a while
wash mitt I use
even NEW I can highly recommend clay baring your paint dis or the kit if you're new
oh and IF your brake pads literally ooze brake dust....this stuff takes time but takes care of the dust easily linky smells WAY better than carpro even at a lower concentration :p
/u/solitudechirs thanks for the tag
/u/CG_Ops dat wall o text
You can buy everything online, though it's easier to go to a harbor freight with a coupon if you have one. There are plenty of polishers you can buy online of course, but none are as cheap (at least with decent quality) as the harbor freight model. You can of course buy a much better polisher at your local lowes / home depot however unless you have a lot more use for it it's probably not worth it over the harbor freight one (a good polisher will cost you $200+). Everything else you can find at any auto parts store, or maybe even walmart.
Here's some links
Basic steps:
You are done! In most environments the duragloss will last 6+ months. If you keep your car protected with it, you won't need to do the cutting/polishing again (or at least, not for a while).
The trickiest part of the whole process is the compounding and polishing. Here are some helpful videos.
And that's about it! It's easier if you don't do touch ups, but I figure if I'm going to put this much work in it, might as well get them. And if you do it right (with careful application and then sanding) the touch ups look nearly flawless (most look terrible because people don't bother to sand them flush).
edit: two other tips...
/u/daniell61 is all about that detailing. Here's a recent comment from him
---
do you know if that [bike] is primarily plastic or primarily metal?
for metal polishes (non painted) I can recommend marine 31's metal polish. shit works wonders on oxidized metals!!! (its my go to for non painated)
leather? any car marketed leather cleaner would be fine. I prefer mckees37 or meguiars to be fair.
for plastics I like this. a lot
leahter cleaner here
for learning these microfibers are a good cost effective start and you wont be hurt when they die and you replace them.
I can recommend any mckees37 towels or the rag company microfibers.
this or 3D pink soap (dirt cheap but i love it) is a great soap for washing without stripping waxes!
if you're like me and dont have time to clean...
once you're done. spray this and wash it off and boom bam you're set to go and have a good quality glass silia coating! here
I like mckees products a fair bit ;)
for sake of easy ass waxing I like extender wax but I do also like meguiars quik wax. that stuffs damn cheap but good. sadly its carnuba only :(
---
here's another one
---
TLDR rinse bucket and bucket with soap. use auto products. dont drop your MF cloths.
Personally I'd pick up a shampoo/conditioner and a basic wash mit thats microfiber made (attracts dirt better and wont mar your question)
(I can recommend 3D pink shampoo. cheap AND I love it)
next up a light compound (you can use meguiars ultimate compound. cheap inexpensive and hard to mess up) this brings out that POP in paint pretty easy to use with a hand applicator which are also cheap :)
next upppp paint polish. this is VERY subjective. I prefer mckees37 stuff but its more expensive than most like. I can also recommend meguiars ultimate polish. good and inexpensive :)
after wards you'll need a wax. meguiars ultimate liquid wax is a great starter and once again inexpensive. (I prefer trademark extender/policoat form mckees37) easy on easy off if you're taking you're time.
afterwards you can call it quits and bam you're done.
or keep going and seal your paint to keep that POP lasting. I HIGHLY recommend collinite 845 as its inexpensive as hell and STUPID easy to apply!!
also Mckees 37 SIO 2 ceramic coating is even easier but $.
then theres coatings. you can use something like Cquarts or even carpro....I personally juse use SIO2 from mckees37 currently. spray on wash off bam. not as effective but beyond stupid easy.
oh and also pick up some microfiber cloths of your choice. theres no right/wrong for them other than DONT DROP EM AND KEEP EM CLEAN.
links to products named
ultimate megs wax
ultimate polish megs
sio 2 coating 10% off ad warning
trademark extender wax spray
3D pink car soap/shampoo
collinite 845
ultimate compound megs
ultimate liquid wax -bigger AG carried
megs ult polish AG carried
Autogeek also price matches to a fair extent! and IF you're local you can pick up. :D
these microfibers are damn nice but $
I personally use these and they're lit. 16 pack and heavy duty enough to last a while
wash mitt I use
even NEW I can highly recommend clay baring your paint dis or the kit if you're new
oh and IF your brake pads literally ooze brake dust....this stuff takes time but takes care of the dust easily linky smells WAY better than carpro even at a lower concentration :p
Here are a couple videos that'll help with the use of products.
clay bar
everything clay bar, compound, and polish
As for the products I use/like I personally like the Meguiar's Ultimate compound and polish. However there are a ton of other options that do as well/or better. For clay I use a range of products, but for your use I would say Chemical Guys clay bar kit would probably do what you need.
Just an FYI you don't need to invest in a dual action polisher to compound and polish, it can be done by hand and save more than a couple dollars...but it'll take a while. I'd say start with clay and see where you're at afterwords. If you still have a bunch of paint transfer then go from there. Another thing I've heard will remove paint transfer (i've never tried it personally) is a carnauba wax, so if you have some around you can give that a go first.
If you do need paint work (it probably won't be as severe as a key) but this video will probably help if you want to try and tackle it yourself.
i think those scratches will come out. they dont seem so bad. you can confirm this by running your nail around them and seeing if it catches your fingernail. youll be better off if they dont really catch.
i think i would go with this car kit from meguiars
as well as ultimate compound
and some polish
i would then wash the car, clay the car, scratchx the scratches, plastx the headlights, compound the car, polish the car, then wax the car.
that will definitely do you. if you have more money, check out a bunch of the sidebar lists for more stuff. maximus's pretty much has it all.
edit: and maybe a couple of these mf applicators. i think they are easier to use and spread the product and work it in really well.
Yup. See if you can pick up some Meguiar's Plastx or Ultimate Compound or Ultimate Polish. Depending on the severity of the haze, you may need to start with Ultimate Compound first.
Maybe try using a very light cutting Polish or Compound and buffing it out with a Dual action buffer.
Start with a polish instead. Always least aggressive. M205 if Amazon ships to you or maybe you can find some Meg's Ultimate Polish at an auto shop.
Hey guys i'm new to this detailing scene..but I do hope to learn a lot from everyone! I have an 05' white civic and the exterior isn't terrible, but there's definitely parts where there's medium oxidation and swirl marks. Just overall the paint doesn't feel glossy and smooth, just weathered and feels like metal.
Please let me know if I got the steps correct...any inputs is greatly appreciated!
Thanks so much for all your suggestions and inputs. I hope to learn a lot from all of you.
PS. Extra question, I'm doing a roadtrip after the detail...(stupid i know) but what's a good product to get rid of the bug stains while I'm out on the road?
THANKS!!
hey thanks for the advice i took into consideration what you suggested and ended with this stuff,
http://www.ebay.com/itm/170694956256?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/190381853105?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
and maybe this?
http://www.amazon.com/Meguiars-Ultimate-Polish-16-oz/dp/B004HCOE8Q/ref=pd_bxgy_auto_text_y
http://www.amazon.com/Meguiars-G17216-Ultimate-Compound/dp/B001O7PNNM/ref=pd_bxgy_auto_text_y
Definitely don't do that! That's a paint thinner and could end up way worse.
My first line of advice would be to go to a detailing shop and tell them you know it won't end up perfect but you'd like a quote. It shouldn't be that much since for them this would be a quick fix - it will still be somewhat noticeable but a lot less obvious.
For the DIY method you'll want
http://www.amazon.com/gp/aw/d/B004HCOE8Q/ref=pd_aw_fbt_auto_img_2?refRID=0J677CETDDQ5SWT21DE9
Which you can put on this
http://www.amazon.com/gp/aw/d/B00BUFWL4C/ref=mp_s_a_1_4?qid=1419064284&sr=8-4&pi=AC_SX110_SY165_QL70
What you'll want to do is get some water mixed with dawn dish soap in a bucket and wash the area around the scrape using a microfiber cloth.
Then let it dry.
Next you'll put some of the polish on the pad and go to town on the scrape.
This is what I'd recommend BUT I've never done it by hand so I can't accurately tell you how long it will take. I would start with maybe the first inch or two of the scrape to see how long that takes you.
As long as you're using the pad you shouldn't have the "hand marks" issue the person above mentioned. People put these pads on machines that move a lot quicker than a person would ever be able to.
Here is the desktop version of your link
You can take paint transfer off your car with some polish and an applicator pad:
Polish: https://www.amazon.com/Meguiars-G19220-Ultimate-Polish-fluid_ounces/dp/B004HCOE8Q/ref=sr_1_3?keywords=meguiars%2Bpolish&qid=1556888366&s=gateway&sr=8-3&th=1
Applicator: https://www.amazon.com/Viking-Car-Care-Microfiber-Applicator/dp/B001GJ9JV0/ref=sr_1_3?crid=TF14W8WDIISK&keywords=polish%2Bapplicator&qid=1556888486&s=gateway&sprefix=polish%2Bappl%2Caps%2C131&sr=8-3&th=1
I've used this method before, works great. Just remember to clean the area before and after, and consider adding some wax after.
Perhaps the wax you're using isn't strong enough to protect against the hard water etching. If you're using a carnauba wax, perhaps try switching to a poly wax, like Meguiar's Ultimate Wax. It has a tackier feel to it when it's cured (not slick) so I imagine it forms a thicker, stronger layer of protection over the car.
To fix lots of etching, I recommend getting a DA polisher, porter cable DA is good, here's a whole kit for under $200,: http://www.autogeek.net/poca74pofcop.html?productid=poca74pofcop&channelid=FROOG&utm_source=CSEs&utm_medium=GoogleProductSearch&utm_campaign=CSE&gclid=CJ_twp2IncACFSsV7AodMSwAAA
though I use Meguiar's microfiber DA correction system on mine, a little more expensive but better.
You can try a number of products to "clean" etching by hand. I'd prefer a cleaner polish like Meguiar's Ultimate Compound, a couple meguiar's foam pads, and a quality microfiber. And follow up with an oil-heavy pure polish like Meguiar's Ultimate Polish
Another tip is to avoid letting water dry over your car. If you have a brief shower and your car gets wet with lots of water beads, drive the car around the block, wipe it down with a huge soft microfiber, or use an electric leaf blower to blow the water off. Or get a Metropolitan Master Blaster air dryer https://www.youtube.com/watch?v=dfGSLSTaOB4