Reddit reviews NOCO HM327BKS Group 27 Snap-Top Battery Box For Marine, RV, Camper And Trailer Batteries
We found 5 Reddit comments about NOCO HM327BKS Group 27 Snap-Top Battery Box For Marine, RV, Camper And Trailer Batteries. Here are the top ones, ranked by their Reddit score.
Heavy-duty group 27 battery box for 12-volt marine, RV, boat, and trailer batteries.Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation.Built for rugged environments with an impact resistance down to minus 20-degrees Fahrenheit, and unaffected by acid, gas, oil, as well as, UV exposure.Limits battery movement and protects against accidental shorting of battery terminals, as well as, collects battery acid and allows adequate ventilation.Certified and tested to meet United States Coast guard (USCG) code of Federal regulations 183. 420, American boat and yacht Council (ABYC) E-10. 7 specifications, and frustration-free packaging.
> You state that your batteries are in series but that would make this a 24V system and you only have a 12V inverter. I think you meant they are parallel. They appear to be parallel in the photo as well.
Thank you for the observation. I've updated the page.
> Also though you have sealed batteries, they should be isolated from the other electronics incase they burst leaking acid and hydrogen gas.
I was under the impression that AGM batteries did not leak unless punctured or dropped. Would putting each battery in a container like this and let the airflow push the air out of the main container be enough?
> ...the inverter should be a larger fuse though, likely more like 60a if not 80a.
While I was testing the inverter capacity I blew its internal 40 am fuse, So i figured using a 40 am breaker would be enough. if I increase the breaker to 60 or 80 as you described, wouldn't that allow the internal inverter fuse to blow again?
> The wire you have appears to be too small for the inverter amp draw.
I am using AWG10 for these connections. Others have also mentioned that this may not be think enough. Would going to a size 6 be enough?
Thanks very much for your feedback, by the way! I'm still learning but all the comments and suggestions help a lot!
Sure.
Lots of people use this one which is nice because it's got all you need built in plus some fancier features out of the box.
What I use and was talking about previous is something like this and this
Quick question regarding battery storage - what sort of containers are ideal for storing lithium ion/"lipo" batteries? I am currently forced to store them in my living space and it makes me a little nervous since I have no protective bin of any sort.
​
These battery boxes would do nothing for a li-ion battery fire, right? What is the correct alternative?
So you buy a 14$ battery box and pop a fuse on the positive lead.
That is a terrible battery box. The acid will eat the box. They make acid proof plastic battery boxes. With provisions for straps. Just make sure you buy a battery box for the correct size of battery.
https://www.amazon.com/NOCO-HM318BKS-Snap-Top-Automotive-Batteries/dp/B004W5SG6Y/ref=sr_1_2?ie=UTF8&qid=1496187688&sr=8-2&keywords=battery%2Bbox&th=1