Reddit reviews Permatex 80050 Clear RTV Silicone Adhesive Sealant, 3 oz
We found 12 Reddit comments about Permatex 80050 Clear RTV Silicone Adhesive Sealant, 3 oz. Here are the top ones, ranked by their Reddit score.
General purpose, clear RTV indoor/outdoor sealantSeals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl topsWaterproof, durable, and flexible; resists water, weather, and vibrationTemperature Range: -75°F to 400°F (-59°C to 204°C)Suggested Applications: Door frames, vinyl tops, seams and roofs; not recommended for engine gasket, windshield installation, or electrical connection applications
No, similar but different.
http://www.mixglo.com/
Most people recomend applying NOA61 adhesive with a syringe which requires a UV light emitter (like the thing they use at nail salons to dry nails) to dry. I'm going to just try clear silicone adhesive as that requires less equipment. I'll let you know how that goes.
https://www.amazon.com/Permatex-80050-Silicone-Adhesive-Sealant/dp/B0002UEPVI/ref=sr_1_3?s=industrial&ie=UTF8&qid=1503161622&sr=1-3&keywords=Silicone+sealant
Owner of rig here:
Thanks for your suggestions so far, I'm definitely intrigued whether the pump is spreading heat affecting the output tube from the GPU.
I was thinking of adding a silicone adhesive to connections when I rebuild it after the weekend. Does anyone have any experience / tips regarding products like permatex
Have you tried something like this: http://www.amazon.com/Permatex-80050-Silicone-Adhesive-Sealant/dp/B0002UEPVI
If your LED strips are encased in a silicone sleeve, I found that using clear RTV silicone like this works well to attach the sleeve to cloth. I tested all sorts of adhesives and this one holds the strongest.
It will be permanent though. You could use it to attach velcro so you could later remove the LED strip.
Silicone is a good choice, it is transparent and a very light coating will create an airtight seal.
(not the grease) something like https://www.amazon.com/Permatex-80050-Silicone-Adhesive-Sealant/dp/B0002UEPVI
Yeah! And they're easy to work with. You can look up how to do it on YouTube. I also recommend you order some weatherproof/waterproof clear rtv silicone such as this because I don't like the black silicone that comes with the lenses. Lastly, a LPT: if you aren't comfortable or don't own a heat gun, use a standard hair dryer. They produce a lot of heat to help you work with plastics and silicone without the dangers of melting parts and paint on your car.
Hope this all helps!
Yeah, that's fine. Pretty much any kind of silicone adhesive will work. I used the cheaper, clear stuff. https://www.amazon.com/Permatex-80050-Silicone-Adhesive-Sealant/dp/B0002UEPVI
This also works, it just requires a little more patience getting it to be clear of bubbles.
For me, it was part #10 on this diagram:
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=S2000&catcgry2=2005&catcgry3=2DR+S2000&catcgry4=KA6MT&catcgry5=MOLDING+-+PROTECTORS
Philips head screw comes out, and you kind of massage/pull the part out (there's a clip on the other side that you don't have access to. Careful not to bend or break it.
Once removed, I'd pour water under there to verify. If that's the spot, dry it out completely, and Permatex/RTV it liberally at the metal seam and quarter panel:
https://www.amazon.com/Permatex-80050-Silicone-Adhesive-Sealant/dp/B0002UEPVI
Has your car had the quarter panel on that side replaced out of curiosity?
You can also try
Permatex 80050 Clear RTV Silicone Adhesive Sealant, 3 oz https://www.amazon.com/dp/B0002UEPVI/ref=cm_sw_r_cp_apa_zxA7BbVD8X59R
i'm sure they sell it in your local hardware store. The specific kind doesn't matter much, just get silicone sealant. The stuff i'm using isn't even the 'flowable' kind and it works flawlessly.
https://www.amazon.com/Permatex-80050-Silicone-Adhesive-Sealant/dp/B0002UEPVI/ref=sr_1_2?ie=UTF8&qid=1469542253&sr=8-2&keywords=silicone+sealant