Reddit reviews TaoTronics Portable Bluetooth Transmitter for TV Wireless Audio Adapter Connected to 3.5mm Audio Receiver, Paired with Bluetooth Headphones, aptX Low Latency, A2DP Stereo Music Transmission

Zune's USB doesn't output audio, nor does it let you browse the file system. Or at least, it won't without the Zune software on PC, which means car stereos won't detect it.

Your best bet is maybe some kind of headphone jack to Bluetooth adapter like these

https://www.amazon.com/TaoTronics-Bluetooth-Transmitter-Receiver-Simultaneously/dp/B01EHSX28M/

https://www.amazon.com/TaoTronics-Bluetooth-Transmitter-Connected-Transmission/dp/B074QLB1Y7/

I use the TaoTronics Bluetooth transmitter. They offer a lot of different versions of it, but this is the one I went with.

https://www.amazon.com/gp/aw/d/B074QLB1Y7?psc=1&ref=ppx_pop_mob_b_asin_title

Does your monitor have an audio-out jack? Many of them do.

If so, you could likely plug a Bluetooth transmitter into the jack, to turn the audio output into a Bluetooth signal that a Bluetooth speaker could receive.

I'm not necessarily recommending that specific model, just using as an example, and you're going to want to do a little research on compatibility (not sure what - if any - limitations an Echo has as acting as a BT speaker).

But this is likely the way to go, assuming your monitor does have audio out, and that you're connecting the Roku to it via HDMI.

And, of course, there's nothing Roku-specific about this setup, so it would work for any device that sends both audio and video to that monitor.

Unfortunately no.

However, if you want to send audio from your TV to your Bluetooth headphones, you can use one of these:

https://www.amazon.com/TaoTronics-Bluetooth-Transmitter-Connected-Transmission/dp/B074QLB1Y7/

Headsets must be PS4 specific to connect directly.
Workaround: TaoTronics Portable Bluetooth
This is a $20 dongle that allows you to use any bluetooth headphones to connect to your TV. Not super eloquent, but gets the job done if you need to game quietly.

Thanks for posting this info. I've had continuous issues watching movies with my Bose QC 35. I got so tired of all the disconnects, that I started just plugging in the 3.5mm cable.

I got this dongle and the Bose QC 35 works 100% with it, connected to the 3.5mm plug on the PB.

https://www.amazon.com/gp/product/B074QLB1Y7

It's just sad that I need this cheap dongle to use BT audio reliably...

The version of the bluetooth on the Bike is important. Both my wife and I ride with X3's and have never had an issue. How old is your bike? It *may* be an issue with the version of bluetooth on the Gen of bike you have, trying to work with newer versions on your X3's. We have a bike we purchased in October and both can be using our X3's at the same time, but the bike always keeps whoever started the ride paired and never has an issue.

Many folks with the issue above have used external bluetooth transmitters on older gen bikes to resolve the issue. I have one I use on airplanes so I can use my X3's there too. These have worked well for us on planes, but never tried on the peloton.

Good luck!

You can get a Bluetooth transmitter for about $20 that'll let you use your existing Bluetooth headphones. Drawbacks are it adds extra bulk, and it's another thing to have to keep charged

https://www.amazon.com/dp/B074QLB1Y7/ref=sspa_dk_detail_0?psc=1&pd_rd_i=B074QLB1Y7&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=f52e26da-1287-4616-824b-efc564ff75a4&pf_rd_r=DBQK0Y8GE6H77F3GJPWK&pd_rd_wg=Paqwm&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=PaR1Q&pf_rd_i=desktop-dp-sims&pd_rd_r=8fbf66a3-d9ba-11e8-8f8d-3f9a1c609712

You could buy a Bluetooth adapter like this one. https://www.amazon.com/gp/aw/d/B074QLB1Y7/ref=mp_s_a_1_1 and go out the headphone jack, or one that is usb like this one. https://www.amazon.com/gp/aw/d/B009ZIILLI/ref=mp_s_a_1_1

Personally I hate using the Alexa and my windows 10 machine, I can ask Alexa to disconnect but windows 10 won't let go and keeps reconnecting until I turn Bluetooth off. I would go with the headphone adapter.

Got this and it did the trick!

https://www.amazon.com/gp/product/B074QLB1Y7/

I think the key is getting something with the A2DP standard and not the newer aptX standard.

Do your implants show up as a paired device in bluetooth settings? If so, you can go in there and disconnect them from the iphone. Then you turn on the genki or other bluetooth adapter and it should auto-pair to whatever it was last connected to. When you're done and you power down the bluetooth adapter, it should let you just hit connect again on your phone to start using them there. No need to go into pairing mode or anything.

I have a hearing problem that requires me to wear headphones most of the time. I use this adapter in handheld mode and then my TV has a headphone jack on it for when I want to play on the big screen. I don't notice any latency. https://www.amazon.com/gp/product/B074QLB1Y7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Buy one of these https://www.amazon.com/TaoTronics-Bluetooth-Transmitter-Connected-Transmission/dp/B074QLB1Y7 and duct tape it to your ipod

I’ve got you covered fam: TaoTronics Portable Bluetooth Transmitter for TV Wireless Audio Adapter Connected to 3.5mm Audio Receiver, Paired with Bluetooth Headphones, aptX Low Latency, A2DP Stereo Music Transmission https://www.amazon.com/dp/B074QLB1Y7/ref=cm_sw_r_cp_api_i_DupWCbD37QQS7

cheapest solution, is a wired headset

https://smile.amazon.com/Telephone-Cancelling-Microphone-Earphone-Headphone/dp/B01BAJ3VOQ?sa-no-redirect=1

​

no promises but I think I've got something workable and cheap, unfortunately you'll probably need your Bluetooth headset connected 24/7 & you'll need to wire a switch to pick up and disconnect the line. You can determine if that is worth the trouble.

​

https://www.headsetbuddy.com/3-5mm-headphone-to-rj9-rj10-rj22-phone-adapter/

https://smile.amazon.com/TaoTronics-Bluetooth-Transmitter-Connected-Transmission/dp/B074QLB1Y7?sa-no-redirect=1 (you'll have to check around to make sure your transceiver will work with your mic

​

This phone will pair a bluetooth headset

https://smile.amazon.com/Panasonic-KX-TG9581B-Link2Cell-DECT_6-0-1-Handset/dp/B00NCUVOAK?sa-no-redirect=1

​

​

Since your TV has no audio outputs, your only option is to pull the audio from the sources you are plugging in to the TV. If you are only using HDMI inputs, you can get a HDMI switch with audio output. Something like this will get you audio out and then you'd also need something like this to transmit the audio over bluetooth.

https://www.amazon.com/dp/B074QLB1Y7/ref=cm_sw_r_sms_apa_i_wraBCbMWHSZKS

This is what you want. Takes 3.5mm jack (aka headphone jack) and broadcast bluetooth.

Technically speaking it would be a 1/8" headphone jack (AKA stereo TRS (tip-right-sleeve connections)) to bluetooth dongle. Kind of rare because it's one hell of a power sucker, and going from usb to bluetooth is more practical if possible. Nonetheless, here's one I could find on Amazon. I'm just giving an example, this isn't an endorsement.

Looked up Bluetooth transmitter on Amazon and found this. There are many other options on Amazon too if you look it up on Amazon.

Do you mean like this one?

https://www.amazon.com/TaoTronics-Bluetooth-Transmitter-Connected-Transmission/dp/B074QLB1Y7

This is just an example, not sure if it's any good. What you need is a "transmitter", specifically- that means it sends a signal out to other devices. Link

There are also "transmitter/receivers" which work in both directions: Link2