Reddit reviews VHT SP229 Rust Convertor Can - 10.25 oz.
We found 7 Reddit comments about VHT SP229 Rust Convertor Can - 10.25 oz.. Here are the top ones, ranked by their Reddit score.
Rust convertor is a unique product designed to spray directly on rusted areasSprays on clear and turns to a black metalPrevent future rust from formingRust convertor sands to a smooth, even finishThis item is not for sale in Catalina Island
I didn't believe this exists, yet it does.
https://www.amazon.com/VHT-SP229-Rust-Convertor-Can/product-reviews/B002NUABUO/ref=cm_cr_dp_d_hist_1?ie=UTF8&filterByStar=one_star&reviewerType=all_reviews#reviews-filter-bar
Just from lots of reading, use a wire brush or wheel to get rid of as much as you can, then use something like this:
VHT SP229 Rust Convertor Can - 10.25 oz. https://www.amazon.com/dp/B002NUABUO/ref=cm_sw_r_cp_api_i_tOk3Bb27VP13R
First, you could scrape that rust off and wire brush it clean. Then coat it with something like this
That will slow the rusting down a bit.
To run the fan constantly throughout the summer won't benefit you the way you think it will. A ceiling fan or a box fan will give you better results without costing as much money and without shortening the life of your heating system.
If you want to run the fan periodically throughout the summer, I wouldn't jump the terminals, I would upgrade your thermostat to a programmable one and run a new wire to your board. The thermostat I have now will run the fan for 4 minutes every hour the system isn't on. I do this to help keep the air in my house clean since I have a hepa filter.
Plus the fact that you can see some significant savings with a programmable thermostat. I ended up getting a WIFI connected one with an app so I can turn the system on/off from anyplace with my phone. So if we are out over night I can have the system off and turn it off as we are heading back to the house.
The first thing to use is Frame Protector for the inside of the frame. This can be messy so do this first. Next a brass wire brush on an electric drill or better yet on Dremel-type tool. Third thing is VHT SP229 Rust Convertor Can - 10.25 oz.. This stuff is amazing. It will turn your rust to a mineral that can be sanded off. Lastly, prep for paint. You can get in all the nooks and crannies with these and these. Do not try to paint it yourself. You suck at it. Take it to a motorcycle painter and if you ask for clear he will just hang it next to a motorcycle tank or fender and do them both at the same time. Should cost next to nothing if your prep is good.
Edit: sp
Maybe try using a rust converter on it. Sand off most of the rust and use some steel wool to get a reasonable surface. Then spray on a bit of rust converter. It'll turn any remaining rust into a hard, black material that will prevent any future rust from forming. I think it also acts as a clear coat so you may wish to do a bit of sanding afterwards too.
https://www.amazon.com/VHT-SP229-Rust-Convertor-Can/dp/B002NUABUO/ref=sr_1_1?ie=UTF8&qid=1478891966&sr=8-1&keywords=rust+converter+vht
Could try this;
http://www.amazon.com/VHT-SP229-Rust-Convertor-Can/dp/B002NUABUO