Best automotive air dams according to redditors
We found 28 Reddit comments discussing the best automotive air dams. We ranked the 17 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 28 Reddit comments discussing the best automotive air dams. We ranked the 17 resulting products by number of redditors who mentioned them. Here are the top 20.
I found a cheap one on amazon for $150
Amazon Link
ikon front lip
Fog lamps with brackets : https://www.amazon.com/dp/B01FL8DPWU?ref=ppx_pop_mob_ap_share
Light stalk : https://www.amazon.com/dp/B00AWO7XOK?ref=ppx_pop_mob_ap_share
C-shaped DRL around the fog lights: https://www.amazon.com/dp/B014P7LPEI?ref=ppx_pop_mob_ap_share
Sequential LED Turn signals with DRL : https://s.click.aliexpress.com/e/5veD22k
9005 LED High Beam : bad link
H11 55W HID Low Beam : bad link
7440 7443 LED Brake/Tail Light : https://www.amazon.com/dp/B07GTKLF32?ref=ppx_pop_mob_ap_share
7440 LED Turn Signal (rear) : https://www.amazon.com/dp/B07Q8RZRZV?ref=ppx_pop_mob_ap_share
194 LED License plate/used as side markers in the front/a couple other places : https://www.amazon.com/dp/B07BT23WVC?ref=ppx_pop_mob_ap_share
194 LED side marker bulbs (not used but the correct ones if you want yellow, I liked the white and it was what I had when the originals burnt out but didn't ever change them from the above link) : https://www.amazon.com/dp/B01KY7GCXW?ref=ppx_pop_mob_ap_share
License plate smoke : https://www.amazon.com/dp/B007LICQ9M?ref=ppx_pop_mob_ap_share
Grille : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F254096211721
K&N 33-2480 Air Filter : https://www.amazon.com/dp/B00CR9WVPE/ref=cm_sw_r_cp_api_i_VfS6CbNBD59AQ
Front Bumper Lip Splitter : https://www.amazon.com/dp/B07B45Z54R?ref=ppx_pop_mob_ap_share
Side skirts : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F391544070112
And the rear diffuser : https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F113007041503
I had my rims done by a local company, they are the factory 16" painted gloss black. My mazda emblem is actually a long story, but essentially it is just scuffed up with sand paper ready to be painted but I liked the look and stuck it back on the way it is. I have also installed car play, and 3D printed a shift knob. The factory bose system was a little lacking and put a small under seat sub in to help fill the sound, but am still not happy with it, so that's a future project.
It does require drilling underneath the bumper btw
Front Bumper Lip Compatible With 2015-2018 Subaru WRX STI | S207 Style Black PU Front Lip Finisher Under Chin Spoiler Add On by IKON MOTORSPORTS | 2016 https://www.amazon.com/dp/B07JD3LFRB/ref=cm_sw_r_other_apa_i_lvKODbG6QRCTH
Also Amazon
https://www.amazon.com/gp/product/B01LYTXHMW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
​
This one. Super cheap and easy to put on. and pretty damn durable. Ive scraped it a couple times and its held on like a champ.
[](Rear Bumper Lip Fits 2006-2012... https://www.amazon.com/dp/B00PQ9U0UK?ref=ppx_pop_mob_ap_share)
It’s far from a Perfect fitment, fyi. Mine is 3M taped/screwed on and plasti dipped for now but it l plan on moulding it in and painting the bumper
I think its this, cut down about 2 inches in the mid.
http://www.amazon.com/Subaru-Impreza-V-Limited-Bumper-Spoiler/dp/B01BEEKTWO/ref=cm_cr_arp_d_product_top?ie=UTF8
heres an older thread I found some info in. https://www.reddit.com/r/subaru/comments/3190a3/my_na_after_a_fresh_tint/
The authentic one has a license plate holder.
The eBay version is cheaper, but it's a rep, so it may have fitment issues.
There is an alternative eBay version that is just the lip portion, as well.
Here is an Amazon rep of the front lip portion only.
If you can, get the authentic version, because for $25, you can get it colored matched.
If you get the reps, you still have to pay for painting, which can cost hundreds.
Front Bumper Lip Fits 2015-2019 Subaru WRX STI | HD Style Black PU Front Lip Finisher Under Chin Spoiler Add On by IKON MOTORSPORTS
https://www.amazon.com/gp/product/B071WVQNK3/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Honestly just Amazon. https://www.amazon.com/GZYF-Splitter-Spoiler-2016-2018-Plastic/dp/B07KJYBV44/ref=mp_s_a_1_4?keywords=Civic+si+splitter&qid=1573327758&sr=8-4
It's not super high quality, plastic similar to the bumper. But I used my own bolts and fasteners to attach and it looks super clean to me.
I don't, sorry. Here is what I think it is, but it doesn't have instructions or anything.
https://www.amazon.com/dp/B07B45Z54R/ref=cm_sw_r_cp_apa_i_t14hDbT5QPRRA
E: looks like you will have to drill holes.
Maintenance first. Get everything checked out. I can almost guarantee you that it has been tinkered with by the previous owner. Make sure there aren't any spun rods or anything like that. Check for rust if you or the car are from an area that salts roads. After that then worry about mods.
V-spec lips look nice though
thanks man! here's the link its only like 20 bucks with amazon prime. fitting it wasnt bad, clean the underside of the car reeeeeeaaaaaalllyyyyy well and if its not an ambient temp of like 70 degrees Fahrenheit use a heat gun to warm up the bumper and the 3m glue. other than that it holds well while you form it. (i had to cut two small pieces out to form it around the curves in the front there. no biggie though. i would also recommend using the screws it comes with to help in the areas of the greatest stress. it may sound like a lot but i didn't want to leave anything out lol
Here's the one I purchased. $40 for the lip + $30 for shipping
https://www.amazon.com/NEW-90-97-Mazda-Miata-Bumper/dp/B019BFCOIU/ref=sr_1_1?ie=UTF8&qid=1491839237&sr=8-1&keywords=miata+front+lip
> 2010 impreza
https://www.amazon.com/2008-2010-Impreza-Finisher-IKON-MOTORSPORTS/dp/B0131PZVL8
I'm considering this one: https://www.amazon.com/Mazda-Urethane-Bumper-Spoiler-Models/dp/B00FEXCNH6?ref_=fsclp_pl_dp_2
It's the GV Style front lip on Amazon :)
https://www.amazon.com/Mazda-Urethane-Bumper-Spoiler-Models/dp/B00FEXCKTC/ref=pd_lpo_vtph_263_bs_lp_t_1?_encoding=UTF8&psc=1&refRID=HVH4QC7EWP3V0VCCHSWA
I got mine from Amazon, and it is working out great for me, they are really all the same, just find one for a good price like this
Mazda3 5dr Hatchback MS Style Urethane Front Bumper Lip Chin Spoiler For 07-09 Models by MagicDrift http://www.amazon.com/dp/B00FEXC9WA/ref=cm_sw_r_udp_awd_Am3.tb0D77QN1
The lip surprising adds quite a touch to the car. If you're curious, mine is from Amazon, since I knew it would get scratched and stuff anyway. It's this one here if you wanted to know :)
Google is awesome!
https://www.amazon.com/Mazda-Urethane-Bumper-Spoiler-Models/dp/B00FEXCKTC