Best automotive reservoirs according to redditors
We found 12 Reddit comments discussing the best automotive reservoirs. We ranked the 5 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 12 Reddit comments discussing the best automotive reservoirs. We ranked the 5 resulting products by number of redditors who mentioned them. Here are the top 20.
Ruien Universal 350ml Oil Catch... https://www.amazon.com/dp/B06XKCRH1R?ref=ppx_pop_mob_ap_share
2 inch 90 degree bracket(home depot). 2 sets of nuts/bolts for mounting can>bracket>car
Assortment of Hose Clamps
3 Ft of 12 mm vacuum hose, i just bought this assortment, ull probably need it for other stuff anyway: Upgr8 Universal 4mm/6mm/8mm/12mm Inner Diameter High Performance Silicone Vacuum Hose Kit (Black) https://www.amazon.com/dp/B00BQ0UHQK/ref=cm_sw_r_cp_api_i_dkaEDbCCP9XST
althought u could use the hoses that come with the catch can kit. i just knew the ones i had were better quality
You’ll need some bigger heater hose (i had laying around) to make that 12mm hose fit to the pcv valve
And you’ll also need a fitting that steps down the T hose to the 12mm hose (could also find at home depot)
As my comment above says, i just piggy backed off the oem breather system as imo looks better and is easier lol. literally unhooked the t hose from the pcv valve (hockey puck). hooked one 12mm hose into t hose and ran to the can. Hooked one 12mm hose to pcv valve and ran to can.
Where i mounted it, you’ll need to tuck your relays into the engine harness slide thing. taking off ur intake will make this a breeze. im pretty active so if u need any help just lmk but i did this in less than 2 hours
Get one! %110 worth it! I have a 156K DE and have used one for the last 50k, Ive collected probably a total of 1 qt of blow by that would of went into the intake and all in the head/valves. The one I use is $25 and works perfect! Just get new oil hosing from a near by auto parts store. https://www.amazon.com/EVIL-ENERGY-00590RD-Universal-Reservoir/dp/B07F3B7683/ref=pd_sbs_263_6/147-2855243-3371127?_encoding=UTF8&pd_rd_i=B07F3B7683&pd_rd_r=5dc4e788-7699-11e9-919b-4f0ed8ac280f&pd_rd_w=wtqUT&pd_rd_wg=55Il6&pf_rd_p=588939de-d3f8-42f1-a3d8-d556eae5797d&pf_rd_r=YMKG6FN9VG4RFRR8MN67&psc=1&refRID=YMKG6FN9VG4RFRR8MN67
I have been working on this over the past 2 years. This will be my 4th HvZ game using this rig. We normally have a game in the fall and then in the spring. I got the idea when the magstrike saved my bacon and I wanted to fix the small bladder issue. The speed of them was awesome but pumping it every time was a pain. I looked up some other mods and didn't see anything I liked. I decided I didn't want to the noise of an air compressor so I went with a large backpack mounted tank.
The magstrikes don't fire much stronger than a stock one. I shot them with a stock magstrike and matched them pretty close. Since basically its just a magstrike with a huge bladder, there wasn't much argument against it. I had the mods come personally over to check it out before hand. The fact that I continue to improve on it and make sure it's safe has earned me respect and I even have people referred to me for help to keep them within reasonable limits.
I've worked up a master part list for you with links of where to get most of it too:
---
Parts List
Subtotal: $109
---
Clothing/Storage
Subtotal: $53
---
Air Tank Parts - All fittings are 1/4" NPT
Subtotal: $158.45
---
Lighting
Subtotal: $83
---
Tools
Subtotal: $60
---
Unknown Prices/Misc Pieces
Estimated Subtotal: $10
----
Grand Total: $473.45
This includes all the parts currently being used in the mod. It doesn't count the two magstrikes I broke/parted out from experiments, other gun parts, extra fittings and all my tools I purchased to build the stuff. Most of this was broken up into small purchases over the past 2 years. $5 fitting here. $50 order there. I also purchased mostly things I could use outside of just HvZ like the bike light, ammo pouches, etc so it's not all wasted on nerf stuff.
thats what you need to use. however its digital and you need analog, so you need a digital to analog converter.
i dont know what country you're in (im guessing Europe somewhere?) but something like this would do:
http://www.amazon.co.uk/dp/B009ZR7IB8/
to clarify you connect the end that says coaxial to SPIDF out on the TV with this kind of cable
https://www.sonos.com/graphics/rn/FAQ2095/10.png
and the adapter you already have to the audio out on the adapter.
It would be another little box that will probably need power, but your other option is an Optical TosLink to Analogue Stereo DAC... Cheapish ones go for £10 here in the UK... It'll take care of component or headphones.
Like This :
http://www.amazon.co.uk/eSynic%C2%AE-Digital-Optical-Coaxial-Converter/dp/B009ZR7IB8/ref=pd_sxp_grid_pt_0_0
(Click on the 2.1 & 3.5mm Output Version)
If you buy one I would try and get a small skinny one. The one I bought was too big and the in/ out lines were opposite and made it hard to install.
The one I bought:
Ruien Polish Baffled... https://www.amazon.com/dp/B06XK9PTP7?ref=yo_pop_ma_swf
I just ran a line from the pcv to the “in” on the catch can then from “out” into the intake. Mounted in to the power steering bracket. Considering doing something with the rear line as well but everyone seems decisive with how to install a catch can.
As a note on the older headsets, like the X12, I found more success in using a RCA to Optical adapter like this, and a spare optical cable to link it all up. You'll obviously need the Chat Adapter to get chat audio to come through, but both my friends use this setup with their X12s and they haven't had any problems.
Xbox one only has digital audio output. HDMI and SP/DIF (Optical). If you wanted to run an Analog audio device, you would need a DAC (Digital/analog converter).
Something along these lines maybe? http://www.amazon.co.uk/eSynic%C2%AE-Digital-Optical-Coaxial-Converter/dp/B009ZR7IB8
I bought a set of regular (but Chinese fake "red top") coils from Amazon for $80. They work great. You should pull a coil and see if oil is in the plug well since that's super common. Easy to replace the valve cover gaskets which cause that. You should check the half Moon gasket on the driver side for leaks which is common and change it at the same time. That's a little more involved since it requires a special tool to compress the cam chains tensioner and lift it up. Kits tend to be bundled with the tool but you gotta be careful with it because they are cheap plastic and can break.
I wouldn't recommend the catch can I bought since it is a leaky POS. The one that comes with the kit looks like good quality but it's quite expensive.
Ruien Polish Baffled Universal Aluminum Oil Catch Can Reservoir Tank Black https://www.amazon.com/dp/B06XK9PTP7/ref=cm_sw_r_cp_apa_elTNBb467G8NG
Ignition Coil Pack Set of 4-1.8T... https://www.amazon.com/dp/B01HABEZO8?ref=yo_pop_ma_swf
That catch can looks much better and those are the coils I bought.
Not saying you didn't buy one for that price, just think you overpaid.
I have something like https://www.amazon.com/gp/aw/d/B06XK9PTP7/ref=mp_s_a_1_3?ie=UTF8&qid=1525709875&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=oil+catch+can&dpPl=1&dpID=51fIvXSdmuL&ref=plSrch
Cost 30$ish when I bought it