Best automotive side marker light assemblies according to redditors
We found 46 Reddit comments discussing the best automotive side marker light assemblies. We ranked the 19 resulting products by number of redditors who mentioned them. Here are the top 20.
![[Ultima] Smoked Lens Dynamic Sequential Blink LED Side Mirror Turn Signal Light Strip Assembly For 2015+ Volkswagen Golf GTI MK7 R VII](https://m.media-amazon.com/images/I/31aTYDHi19L._SL500_.jpg)
[Ultima] Smoked Lens Dynamic Sequential Blink LED Side Mirror Turn Signal Light Strip Assembly For 2015+ Volkswagen Golf GTI MK7 R VII https://www.amazon.com/dp/B07SRD8BL4/ref=cm_sw_r_cp_apa_i_yxooDbYG0F66H
Here are the ones I got. Not hard to install at all! But be careful when trying to take your mirror cover off, cause I chipped my passenger mirror. Nothing too noticeable, but it's noticeable to me.
https://youtu.be/-IcJqSPQ9nw
Here is the video that helped me remove the cover. Other than the cover, it's two t10 screws and a little bit of elbow grease to get the lights out. The package came with a t10 screwdriver and a bone tool, which helped out a ton! It took me about an hour to install both.
For anyone curious
​
Black Matte/with glossifier plastidip front and rear emblems/logo
​
Smoked sidemarkers Here
​
Black Gloss Vinyl Kit from KoolTint :HERE
​
Black Lugs on Order from College Hills Honda
​
Tint: 18% rear, 35% front, 5% eyebrow
That's worth doing if you have an obscure vehicle... If you have something common enough it can be almost as cheap to buy a new headlight assembly.
I have a 19 sport but really wanted an ex for the extras and couldn't get it in time. Seeing it in my color makes me so jelly. That's a clean whip 🔥
As far as chrome delete goes, here are some links you can use if you want. smoked markers, chrome trim blackout, lug chrome delete, black or carbon handles, this site has stickers for the useless buttons, steering wheel, dash, shifter. I went down a rabbit hole.
here’s the ones I bought.
Cheap, 10 minute install, and they have smoked with white LEDs no resistor needed.
I got these: Looked great, fit better than the OEM. https://www.amazon.com/gp/product/B073X69N7D/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
​
I would think that tape would not be an acceptable fix. I don't know what your regulations are there but where I live, if your vehicle came equipped with side markers they must work during a VI.
These are cheap and I would think easy to replace. Looks like they just snap in to place.
I found these magnetic USB cables quite handy for charging the controllers while minimizing the risk of bending the micro USB ports.
Since I also have an Oculus, I bought this HDMI switch so that I don't ever have to unplug and re-plug in the cables (which damaged them in the past, which was hell). If you are going this route, I might next time consider a KVM switch that also switches the USB, though I do not have one to recommend.
Items used:
2.Wire stripping tool
Lightbar and other mods here: https://www.reddit.com/r/XVcrosstrek/comments/cnpnvg/shes_finally_reached_her_final_form_and_dang_does/ewcpvzz?utm_source=share&utm_medium=web2x
​
The grill lights are these from Amazon: https://smile.amazon.com/gp/product/B01I1CHCO0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I have the Weathertech floor liners in mine. Husky and OEM are other options. For the side markers I bought smoked one's off Amazon.
REVi MotorWerks DEPO Smoke Front Bumper Side Marker Light Set + Amber Bulbs FIT for 2016-2018 Honda Civic 2D/4D/5D https://www.amazon.com/dp/B073X69N7D/ref=cm_sw_r_cp_apa_i_nXQUCbDD09KSG
I think most states the side markers just half to be reflective and visible from 500ft. There are also some LED one's that will work with your turn signal but require a fuse tap. Lots of options.
I went with the Procivic wind visors on mine. There's a Mugen type as well. Just depends on what you want to spend on what look. I'm happy with the Procivics.
www.civicx.com is a great place to find info as well.
Here's mine
https://www.civicx.com/garage/black-blue.1850/
Unfortunately, no I these and these for the climate control
Links to components used:
Headlight
Wiring Harness
36v-12v Converter
Tail Lights
heat shrink
Mounting Brackets
You could always buy the Triumph ones... or get the Koso's that are identical. That's what I did on mine. Word of warning, though: the Triumph LEDs are EXPENSIVE. Hence, the pair I bought for the rear are the Koso's. Got the Triumph LED flasher relay, too.
Edit: Linky-pants! https://www.amazon.com/Koso-HE015K14-Thread-Unlimited-Marker/dp/B005EMYPFK
Same here! The fishbowl look is driving me nuts. I just did mine, so my disclaimer is that I don’t know how these will wear, but... I went through this Amazon seller. Good reviews and suggested by a friend who has them.
https://www.amazon.com/dp/B075KTWTF9/ref=cm_sw_r_cp_api_i_QKR7CbXS011VY
These?:
Driver Side Replacement Bumper Signal Light https://www.amazon.com/dp/B006TMKKZI/ref=cm_sw_r_cp_api_ocWhzbR7RMGJF
Passenger Side Replacement Bumper Signal Light https://www.amazon.com/dp/B006TMKL8O/ref=cm_sw_r_cp_api_4cWhzbW3MNVCA
They are led marker lights, they are cheap too, these ones: 10 Pcs TMH 3/4" Inch Mount White LED Clearance Markers Bullet Marker lights, side marker lights, led marker lights, led side marker lights, led traile https://www.amazon.com/dp/B019MH34PO/ref=cm_sw_r_cp_apap_5ANP8hzk5Um75
They do have a little bit of a lense, and I did try to aim them the wide direction aiming out if that makes sense.
I did change them out. These are the ones I picked up from Amazon and I love it.
Here are the light bars I used and button leds also the switches I used
For the price I have absolutely no complaints. There is some sort of residue on them I believe, but that should just clean up. Haven't tried yet. I can get better photos if you want.
They were $26 on amazon when I bought them: https://www.amazon.com/gp/product/B07CQSPL1P/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 There is also a variant for the sedan, and even ones that have LED logo lighting.
Side markers were a little pricey but had the best reviews I saw: https://www.amazon.com/gp/product/B073X69N7D/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 There are some in the $20-30 range.
these!
Get the Amazon ones. Previous owner sprayed mine and they look like shit maybe six months later. I ordered these and they look great.
I just want to make sure this is what I'm looking for. Like I said, the bulb is fine. But I need a new cover.
http://www.amazon.com/TYC-18-5220-00-Toyota-Corolla-Replacement/dp/B002R0YD04/ref=au_as_r?ie=UTF8&Make=Toyota%7C76&Model=Corolla%7C1013&Year=2000%7C2000&carId=001&n=15684181&newCar=1&s=automotive&vehicleType=automotive
It would be cool if you get it to work, but would you install the receiver inside the controller grip?
I use the magnetic usb charging cables on mine. They hang right below where the controllers hang and I can just click them into the usb end and pop them off when I want. Haven't had to remove the ends yet, so hoping they come out easy.
https://www.amazon.com/dp/B01BY2Q59C?psc=1
They charge as fast as the standard usb cable.
These guys- Bullet LED - Amazon
You just need a 3/4” hole to pop em into
Purchased from iJDMtoy through [Amazon] (https://www.amazon.com/iJDMTOY-Right-Marker-2016-up-Hatchback/dp/B01LWLEFOG) with the amber LEDs. A couple of other places sell them as well on ebay. I've seen smoked ones too, those ones look pretty sharp.
I was hoping I could match it to the other side. But I did manage to find something that may have the same brightness and diameter on amazon https://www.amazon.com/gp/product/B01IR3G3S4 hopefully that works if I take it apart.
My old WC wont work (dunno why) with ms s7e but with my s6e.
If im using the Unicorn Beetle case i have to use an other power brick without Fast Charge otherwise it wont charge.
( http://www.amazon.com/dp/B01BY2Q59C?psc=1 )
Wont work for me on s7e but working fine on s6e -.-