Best transparent tape according to redditors

I'll assume that ball is 10cm diameter, so its
radius=5cm
volume=524 cm^3
a penny is 3% copper (density 8,96 g/cm^3 )
and 97% zinc (density 7,14 g/cm^3 )
so total weight is 524cm^3 (8,96 g/cm^3 3% + 7,14 g/cm^3 97%) = 3770g

(it has to be less than that ofc because that ball is not homogeneous)

EDIT: /u/s1th_lord and others asked about the tape. This pack of 32 1200in rolls of tape totals 30480in = 975.36m and weighs 1.63lb = 740g. I'll assume there are 100g of spool etc so 640g of "pure" tape.

It seems OP used tape over every coin, and a penny is 19,05mm diameter, so 1000 pennies = 19,05m of tape.

The weight of tape used then = 19,05m 640 g / 975.36m = 12 grams.

Glue. Yes, there is clothes glue. Well, tape actually: Hollywood Fashion Secrets Medical Quality Double-Stick Apparel Tape, 3 tins x 36 strips Value Pack https://www.amazon.com/dp/B00AR4BLWA/ref=cm_sw_r_cp_api_6DPCAbWDY3BHR

This lip ripping piece of work right here.

First class mail package/thick envelope works absolutely fine with 4x8 bubble mailers. It costs about $2.67 if you purchase the postage through eBay, and you get the added bonus of free tracking and delivery confirmation. When you're shipping more valuable cards, you might want to spring for insurance (pay out of your own pocket if the buyer didn't request it specifically). It's pretty cheap and is a good way to play it safe.

 
Here's the method I've used for shipping hundreds of cards on eBay, with absolutely no problems whatsoever. You'll need the following supplies:

 
#000 4x8 Bubble Mailer
Penny sleeve
Toploader
Team bag
Scotch tape
Packing tape

 

1. Place the card you want to ship upside down in the penny sleeve, then fold the excess bit of plastic back up from the open end of the sleeve. This will keep the card from sliding out of the penny sleeve.
    
   
   
2. Slide the penny-sleeved card into the toploader, starting with the folded end of the penny sleeve. Be sure to keep the penny sleeve folded while you do this. It might be a bit tricky to get the card into the toploader, but it won't fall out of the penny sleeve once you do.
    
   
   
3. Tap the bottom of the toploader against a hard surface a couple times if need be to make sure the card is all the way inside and level. Then, tape a piece of scotch tape and tape up the open end of the toploader. Make sure to use a bit longer piece of tape than you need, and fold on end over itself to make a tab on one side of the toploader. This will ensure that the card won't fall out of the toploader during shipping while making it easier for your buyer to get the card out.
    
   
   
4. Place top toploader inside a team bag and seal it. In the event that your bubble mailer gets wet, this should ensure the card remains undamaged.
    
   
   
5. Print out the order invoice, fold it up, and place it inside the bubble mailer along with the toploader. Seal the bubble mailer, then place a piece of packing tape over the flap of the bubble mailer to ensure it stays shut.
    
   
   
6. Print out your postage. You can use a regular piece of printer paper if need be, but I'd definitely recommend going with an adhesive address label. Better yet, if you'll be shipping in volume I'd recommend getting a thermal printer (I've got a Dymo LabelWriter 4XL that's awesome), because then you don't have to worry about smudging, even if the address label gets damp.
    
   
   
7. Apply the postage to the outside of the bubble mailer. If you're using regular printer paper, be sure to tape all edges with packing tape to ensure it stays in place. Then place a piece of packing tape over the addresses. Again, this step is unnecessary if you invest in a thermal printer.
    
   
   Hope this information helps anyone looking for a worry-free way to ship cards!

I've always used the Hollywood Fashion Tape or, because sometimes I just really need it to hold, duct tape or skin-safe sports tape. Duct tape isn't exactly skin safe for long wear, but it gets the job done.

https://www.amazon.com/Scotch-Removable-Poster-150-inches-109/dp/B00004Z4BR

How big is a roll? There's 1/2 x 450 inch, 3/4 x 1000 inch, 3/4 x 300 inch and probably a lot more.

Surface area of the earth is 196.9 million square miles. That's 7.9 x 10^17 square inches.

If we use the first roll, each roll has 225 square inches. We'd need 3.5 x 10^15 rolls.
If we use the second roll, each one has 750 square inches. We'd need 1 x 10^15 rolls.
The third roll also has 225 square inches, so it'd be the same as the first

How about Scotch Removable Tape or Scotch Double Sided Removable Tape?

Start with one layer and add more until desired effect.

Here

https://www.amazon.com/Scotch-Transparent-Inches-Rolls-2157SS/dp/B003GSB944/ref=sr_1_17?s=office-products&ie=UTF8&qid=1500205547&sr=1-17&keywords=tape

I know it's not a decoration but I need [tape] (http://smile.amazon.com/gp/aw/d/B0000538AC/ref=aw_wl_ov_dp_1_1?colid=RXUSRXI7HI18&coliid=I1W8OL38OMKRZT&vs=1) to wrap presents! :D

These both work:

• https://smile.amazon.com/dp/B0141L81GS
  
  
• https://smile.amazon.com/dp/B00006IF5M
  

Paint : 45 Dollars
https://www.amazon.com/Jolie-Paint-Accessories-Quart-32oz-Gentlemens/dp/B07KFL722B/ref=sr_1_1?keywords=blue+wall+paint&qid=1572963787&sr=8-1


Dual monitor Arm : 35 Dollars

https://www.amazon.com/VIVO-Monitor-Adjustable-Screens-STAND-V002/dp/B009S750LA/ref=sr_1_9?keywords=monitor+arm&qid=1572963822&sr=8-9


Drill a hole in your desk : 0 Dollar

Cable cover : 15 Dollars

https://www.amazon.com/D-Line-Raceway-1D3015W-Electrical-Paintable/dp/B077YD9DG6/ref=sr_1_3?keywords=cable+cover&qid=1572965300&sr=8-3

Cable straps : 8 Dollars

https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK/ref=sr_1_3?keywords=cable+straps&qid=1572965368&sr=8-3

Cable sleeve : 9 Dollars


https://www.amazon.com/Alex-Tech-10ft-Protector-Sleeving/dp/B07FW3GTXB/ref=sr_1_2_sspa?keywords=cable+sleeve&qid=1572965405&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSzhQR1pSSU40Rks4JmVuY3J5cHRlZElkPUEwNjgyMDQ5MkpQU1lMMlhMV0g1RiZlbmNyeXB0ZWRBZElkPUEwODEyODg1Mkw4UEE5T1Q2SkNDRCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

​

Double sided tape : 6 Dollars


https://www.amazon.com/ReLuien-Adhesive-Reusable-Washable-Anti-Slip/dp/B07Y1QWZ5V/ref=sr_1_1_sspa?crid=1OOIXED1G83R8&keywords=double+sided+tape&qid=1572965456&sprefix=double+%2Caps%2C267&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyTkQ1SklLSzBYV1BSJmVuY3J5cHRlZElkPUEwNjM1NjgzMVpPMEZKTjhSUFpNTSZlbmNyeXB0ZWRBZElkPUEwNjU0NTA0MkNKTVNEMzZGWFhSQyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=


Total cost : 118 Dollars


You're right i'm waaaaaay off my estimated price, it's about half the price i thought it would be.


I'm sorry dude I just gave my opinion on how to easily improve the aesthetic of your setup but you clearly don't really care about it, then again why post on this sub reddit then ?

Price History

• Double Sided Tape Heavy Duty Adhesive Mounting Carpet Tape, Removable   ^PureLink
  CamelCamelCamel - [Info] │ Keepa - [Info]
  
  _
  Don't make a Rookie mistake, check the prices.
  ^(Info) ^| ^(Developer) ^| ^(Inquiries) ^| ^(Support Me!) ^| **[^(Report Bug)](/message/compose?to=The_White_Light&subject=Bug+Report&message=%2Fr%2Famazondealsus%2Fcomments%2Fdmcb2r%2Fnano_magic_tape_expires_1031_coupon_codes6wt6o2l%2Ff4z7g6z%2F%0D%0A%0D%0A%0D%0A%0D%0APlease+explain+here+what+you+expected+to+happen%2Fwhat+went+wrong.)**

Surprised someone else hasn't said Scotch tape yet... Clear and adhesion that won't pull up anything.

https://www.amazon.com/Scotch-Gift-Wrap-Inches-Pieces/dp/B017FJJZZY/

Oh I got you. Just saw a lot of special poster tape items online and a lot of reviews said they don't hold stuff up very long. And bigger stuff is even worse. So just wanted to see.

I was on mobile earlier here are the links summer and glitter these are from the US amazon, I couldn't find them on the UK amazon.

As an alternative, there's also fashion tape like this that will hold up socks, though you'd probably have to use several per leg

I second this. Make sure your skin is dry when you put it on and it'll stay all day: https://www.amazon.com/gp/product/B00AR4BLWA/ref=oh_aui_detailpage_o05_s00?ie=UTF8&th=1

Scotch Adhesive Dot Roller Refill, 0.31 x 49 Feet (6055-R) https://www.amazon.com/dp/B0039N3QHO/ref=cm_sw_r_cp_apa_i_Vak8CbQ1WFSAP

If the link above doesn't work. Search Amazon for "3m glue dot"

This scotch tape would be amazing because I use tape for everything. Literally everything.

I went to a cat show today. It was magical. So many cute cats, I couldn't even stand it.

If you're careful when you remove them you can re-use the existing double sided tape. When you go to disassemble the laptop, try to get the feet off with a razor blade by getting as close to the base of the laptop shell as possible. You should see the feet come off with the tape still attached as one piece, as long as you don't crease the feet or get a lot of dirt on the adhesive you should be fine to reuse them. Otherwise, if the adhesive doesn't work out, just buy standard double sided tape and cut it to size, then thoroughly clean off the old tape from both the shell and the feet before applying the new tape.

Alternatively and even cheaper would be a plain easel sketch pad and a roll of removable mounting tape.