(Part 2) Top products from r/razerphone

I use this one but 12000mAH instead.
https://www.amazon.com/iWALK-Scorpion-8000mAh-Recharging-Cables/dp/B06Y34F62W

Love it because it supports quick charge, and since my wife uses an iphone, with this I no longer need to carry different cables when we go out.

Wireless Charger, CHOETECH Qi... https://www.amazon.com/dp/B00C40OG22?ref=ppx_pop_mob_ap_share

This is what I use and it is pretty cheap $13.99

It works perfectly fine for me and I have a plastic and rubber case on my razer phone 2

I have a wireless charger like that Anker one I can't use it to charge my RP2 at all due to coil placement in the RP2.

The flat Samsung Qi Chargers [https://www.amazon.com/Samsung-Certified-Charge-Wireless-Charger/dp/B012AWBN9C/ref=sr_1_4?crid=JH9AVNWXW7T8] however work perfectly fine through the Tudia Merge case as long I place the RP2 correctly.

Yup I do this all the time when I travel. Sentio works pretty well and Project Linda was using it in their demos.
I use this dock. Just know there's no input so you'll have to connect to it with Bluetooth devices. There are some docks that have usb input. I just like to make sure it has power delivery too. I also mount the phone on a fan grip so it doesn't overheat.
https://www.amazon.com/dp/B06XNS7W63/ref=cm_sw_r_cp_apa_i_KsBVCbPKA8D8Z

If you get a display port one, you can shoot 120 for into a high fps monitor too.

I have and love my razer phone. If I didn't have it already however, I would think about the ROG. That's the one with all the peripherals, right? It seems they're setting up for a future with this.

Razer was good to start the trend of higher refresh rates but, as you can find in this subreddit with slow software updates, many users feel abandoned. As if these phones were a gimmick to get ahead in sales and now that that's done, move on to the next sale gimmick. Like when I ordered a new screen protector from Razer (and a controller for my phone), it came with caffeinated water flavor packets that apparently they make now, for gaming.

Anyway, I've been researching here the past little bit. Phones that can use real styluses have to be built for that. Most Android phones aren't and you need a large surface area so the phone registers it as a finger. So those styluses with the big rounded tip are what you need, or the ones with a smaller tip surrounded by a clear disk.

Example pen:
https://www.amazon.com/dp/B00N1BRWLA/ref=cm_sw_r_cp_apa_i_araLDbQPE7Q7Q

https://www.amazon.com/dp/B00I5SW8MC/ref=cm_sw_r_cp_apa_i_HYR3DbPS6M5Z1

That's the closest I could find. It's not a bluetooth one, and it's MUCH newer than mine (but it looks very much the same) . I had a friend give me the one I use almost a decade ago lol.

I picked up Jaybird X3 on clearance at Target. They put out pretty good isolated sound in my opinion, but I'm no audiophile. They hold a connection much better than the Beats I had previously. I have used them for over an hour at a time while mowing the yard and they still had at least 20% left.

https://www.amazon.com/Jaybird-Wireless-Bluetooth-Sports-Headphones/dp/B01M7NCT5O?th=1

I hope I can link it here. It's this.

The WSKEN USB-C is also a reliable magnetic charger. The LED indicator when the device is connected is a nice touch.

https://www.amazon.com/gp/aw/d/B0782DMPH1/ref=psdcmw_2407774011_t2_B01MA6JT6K

No, it was that the port got so wide that it couldn't do USB charging anymore. I don't think the screws would come off.

A couple of janks in the wrong directions. The USB-C port wasn't quite well designed to last. I've taken apart my own Alienware laptop and the TB3 port on the back has a pretty beefy metal bar that screws in to prevent the port from moving around. Based on those inferences I think it's just cause I plugged things into it (like my headphones) often enough to the point that it just wouldn't charge.

I have a Volta magnetic disconnect cable now to prevent my mechanical keyboard, which also uses an unprotected USB-C cable, from having its port snapped off if it gets yanked, as has happened in the past (I managed to solder it back on the first time). I'm currently just using an Anker cable but at some point I'll get more magnetic USB heads and I'll be able to protect my phone port as well.

There's also a different solution to the unprotected port problem, which is to get a wireless charging adapter like that one (has a lot of reviews) which is Qi compatible, but I can't be sure of its charge speed, especially when charging up the beefy battery.

Don’t see any reason as to why Bluetooth doesn’t work, so I can’t help you there but you can try a combination of this and something like this, which can do the Bluetooth stuff for your phone. Not the most elegant solution but it should work for your car.

Edit: for some reason reddit broke hyperlinks completely on both platforms so www.amazon.com/dp/B07LFBCVTY/ref=cm_sw_r_cp_api_i_nhKLDbC061B5P and www.amazon.com/dp/B01EHSX28M/ref=cm_sw_r_cp_api_i_6fKLDbMGM8FX3

Razer Arctech Pro for Razer Phone 2 Case: Thermaphene & Venting Performance Cooling - Wireless Charging Compatible - Drop-Test Certified up to 10 ft - Matte Black https://www.amazon.com/dp/B081LWGR5V/ref=cm_sw_r_cp_apa_i_KDm3DbW8YQZKD

I use this: Cell Phone Holder for Car, Car Phone Mount Holder Cradle Compatible for iPhone Xs XS Max X 8 8 Plus 7 SE 6s 6 Plus 5s 5 4s Samsung Galaxy S6 S5 Note LG Sony Nokia Google Nexus Motorola and GPS https://www.amazon.com/dp/B01N210GDQ/ref=cm_sw_r_cp_apa_i_zv55CbCNMQJMS

Mine works with this USB C to A cable and the USB C to A cable that came with this power bank. That's all I've tried it with.

I'm using this one with a Spigen case, the arms do come close to the volume buttons but it's padded and hasn't caused issues so far: https://www.amazon.com/gp/product/B017N7N0TA/

This adapter also works quite well, and doesn't have the extra USB-C port (which annoyed me because it's something I would never see myself as using/needing.)

Not sure if you live in the US or not but...

​

https://www.amazon.com/Razer-Phone-USB-C-3-5MM-Adapter/dp/B07798HM3H

Samsung 128GB 100MB/s (U3) MicroSD EVO Select Memory Card with Adapter (MB-ME128GA/AM) https://www.amazon.com/dp/B06XWZWYVP/ref=cm_sw_r_cp_apa_i_61SOCbCN6DY0J

This is the one I use. No issues so far!

I really feel bad for you... a type c from laptop still counts for quick charge 4.0+. I almost never used the power brick; oh and the transfer speeds are ridiculous. Keep that in mind when you will buy your next laptop.
Something like this should do
https://www.amazon.com/Cable-Matters-Ultra-USB-C-Black/dp/B00S8GU2OC/ref=sr_1_3?ie=UTF8&qid=1520215471&sr=8-3&keywords=usb+type+a+to+type+c