Reddit reviews Fosmon A1602 RCA Splitter with 3-Way Audio, Video RCA Switch Box + RCA Cable for Connecting 3 RCA Output Devices to Your TV

Rca splitters or selectors. Super cheap ones on Amazon, or shell out a bit more for a nicer one.

Like this: Hosa YRA-104 RCA to Dual RCAF Y-Cable https://www.amazon.com/dp/B000068O4Y/ref=cm_sw_r_cp_apa_JOz7xbWBZ5BPZ

Or: Fosmon Technology 3-Way Audio / Video RCA Switch Selector / Splitter Box & AV Patch Cable for Connecting 3 RCA Output Devices to Your TV https://www.amazon.com/dp/B00HNCPR92/ref=cm_sw_r_cp_apa_yPz7xbR6BCQ6B

Nicer: Four Input Source Tabletop Control Switch Box Internal Pc Board Design Metal Case https://www.amazon.com/dp/B0056EK7Q2/ref=cm_sw_r_cp_apa_-Qz7xbAK8CJFZ

Done new afraid to get one made for AV, there's no difference. You just won't use the video rca jack.

Use one of these. Run it backwards ;)

Something like this:

https://www.amazon.com/STEREO-Manual-Speaker-selector-available/dp/B073GWCRP3/ref=sr_1_3?ie=UTF8&qid=1509721642&sr=8-3&keywords=audio+switch&dpID=31Rn3KyybiL&preST=_SX300_QL70_&dpSrc=srch

https://www.amazon.com/Fosmon-A1602-Splitter-Connecting-Devices/dp/B00HNCPR92/ref=sr_1_7?ie=UTF8&qid=1509721642&sr=8-7&keywords=audio+switch&dpID=519o-1mxIFL&preST=_SY300_QL70_&dpSrc=srch

Your stereo only has a single set of RCA inputs? I would not go the splitter approach. You want a switch instead

Or maybe you don't need to run another audio cable across the room

You don't need a mixer unless you want to play the piano and the turntable at the same time. You can simply plug whichever one one you're using into the receiver, and unplug the other.

This is a bit of hassle, so you can buy something like this switch to switch between the TT and the piano.

Since you have a receiver, you're looking for passive as opposed to active speakers. Since you're playing the piano, you'll want accurate sound reproduction, so studio monitors would be a good choice.

With decent speakers, you don't need a subwoofer to play the piano. You might want one for your music. There aren't really any speakers that don't need a subwoofer - it always helps. (I don't have one because the 5.5" drivers in my speakers give enough bass for what I listen to, but I would get one if I listened to more EDM for example.)

3.5mm switches will be tough to find, as the ONLY place that's really used is in headphones or old computers. Use something like this


Something like this is also an option also using 3 3.5mm to RCA adapters, you just won't use the video portion.

Active speakers are typically designed to be used by one device. That's their main benefit...you don't need a full receiver to connect them to...you can just plug them directly into whatever audio source you want and be done.

If you want to use powered speakers with multiple inputs, you need to figure out how to switch between the multiple inputs. One option is to just run both into one input using Y-splitters. That means you'd have your computer and your turntable plugged into the same inputs at the same time.

This is the cheapest solution...but obviously you'd want to avoid playing both at once.

You could also buy an actual switch as well:

https://www.amazon.com/Fosmon-A1602-Splitter-Connecting-Devices/dp/B00HNCPR92/ref=sr_1_1?ie=UTF8&qid=1493661472&sr=8-1&keywords=rca+input+switch

So that solves the speaker portion, but not the headphone side. So you still need a headphone amp (since it appears those speakers do not have headphone outputs). So you could get another switch and essentially have the ability to switch the inputs (turntable v computer) and then on the other side a switch to change the outputs (powered speakers v headphone amp).

At that point, however, you may want to consider going back to a good ol set of passive speakers and a proper receiver that would include multiple inputs and headphone out for you. (Or, alternatively, get powered speakers that include a headphone jack).

Oh that's easy then! You can get splitters like this where you can just flip back and forth between the inputs when you want. Some others may come with a remote.

If you really want to just have both always on I believe you'd need a mixer like this one but they are more expensive than a simple splitter.

No TV is going to have more than one RF port. You can either daisy-chain the RF adapters for the consoles (I'd try this, and stick with it as long as the image doesn't look any worse), or you can get an RF switch. I've only ever seen 2-port RF switches. https://www.amazon.com/RCA-VH71-B-Slide-Switch/dp/B00009W3F2/

For composite, some TVs will have more than one, but an easier solution is to just get a composite switch box. These are incredibly common, and can probably be found at a local store. You can get them in anywhere from 2-5 inputs pretty cheap. Here's a 3-input one: https://www.amazon.com/Fosmon-Technology-Selector-Splitter-Connecting/dp/B00HNCPR92/

As for PVMs, they do not have TV tuners in them, and therefore do not take an RF input. You can connect any standard VCR, however, and this will enable you to input RF into the VCR and output this signal to the PVM as composite video.

Something like this https://www.amazon.com/gp/aw/d/B00HNCPR92/ref=psdcmw_597546_t1_B00J6W8D0C

You'll only be able to use one at a time though.

I use this (https://smile.amazon.com/gp/product/B00HNCPR92/ref=oh_aui_search_detailpage?ie=UTF8&psc=1). I use a 3.5 to RCA cable for my headphones. My speakers use RCA. I have it taped to the underside of my desk.

I'm using this thing from Amazon. It feels exactly as cheap as it costs, but it does the job!

1. https://www.amazon.com/Optimal-Shop-Output-Selector-Splitter/dp/B00NWJQSM0/ref=sr_1_1?s=electronics&ie=UTF8&qid=1505857961&sr=1-1&keywords=rca+audio+switcher
   
   https://www.amazon.com/Fosmon-A1602-Splitter-Connecting-Devices/dp/B00HNCPR92/ref=sr_1_11?s=electronics&ie=UTF8&qid=1505857961&sr=1-11&keywords=rca+audio+switcher
   
   
2. I have only had bad experiences with Schiit products and their customer service. My Modi 2 broke and Schiit refused to replace or fix the issue even though it was still in warranty. They have bad QC and overprice a majority of their products. They do market very well to this sub and Headfi though.

You already have a Modi right? I would just leave that connected to the PC and pick up an SMSL 793ii and use that with the PS4. If you want to keep using the Magni as the amplifier then I would get a FiiO D03K or SMSL 192-Pro and a stereo RCA switcher like this. Otherwise, yeah you'd be looking at selling the Modi you have and picking up the uber version instead unless you have some other use for two Modis.

Okay, so the issue here is that you're not sending a digital input to the DAC from the iPad. In my opinion, take the L on being able to use both devices through the Modi. What you can do is get an RCA switch where you select what goes into the Magni.

Cheap: https://www.amazon.com/Fosmon-A1602-Splitter-Connecting-Devices/dp/B00HNCPR92/
Expensive: https://www.schiit.com/products/sys

I would just use a 3.5mm to RCA male from the iPad, and RCA cables from the Modi connected to the desktop. Put those into the switch and output to the Magni.

You will get double amplification from the speakers and it's not gonna sound pleasant. You can buy an rca hub/splitter and add it after the preamp instead.

Edit: this would work

I was thinking of something like this

For just a bit more, you could get an actual video switch.

The best way to go about this is to get some sort of RCA stereo switch. You don't need anything fancy. I use this:

Fosmon A1602 RCA Splitter with 3-Way Audio, Video RCA Switch Box + RCA Cable for Connecting 3 RCA Output Devices to Your TV https://www.amazon.com/dp/B00HNCPR92/ref=cm_sw_r_cp_apa_i_34T4Ab1ZHH6BA

You'll go:

Turntable to pre-amp to switch
CD player to switch
Switch to speakers. Then just click the button to whatever source you're using.