Reddit reviews I/O Crest 4 Port SATA III PCI-e 2.0 x2 HyperDuo RAID Hard Drive Controller Card Marvell 9230 Chipset

We found 9 Reddit comments about I/O Crest 4 Port SATA III PCI-e 2.0 x2 HyperDuo RAID Hard Drive Controller Card Marvell 9230 Chipset. Here are the top ones, ranked by their Reddit score.

We recommend a fresh Windows install with this cardDrivers are required for this card to function.Chipset: Marvell 88SE9230Installed with a full profile bracket, Low profile included with the packagePort Multiplier FIS-based and Command-based switching supportedSupports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0GbpsSupports RAID 0 and 1 modes, Requires at least a PCIe x4 slot to function4 Internal SATA 6Gb/s PortsCompatible with SATA 6G, 3G and 1.5G Hard DrivesPCI-Express x2 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slotsRAID mode Supported: RAID 0/1/1+0HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiring technology into the chipset.Does not support Hardware RAID using Port MultiplierSupport 3TB and 4TB GPT Hard drivesChipset: Marvell 88SE9230

Check price on Amazon

9 Reddit comments about I/O Crest 4 Port SATA III PCI-e 2.0 x2 HyperDuo RAID Hard Drive Controller Card Marvell 9230 Chipset:

u/Duamerthrax · 3 pointsr/hackintosh

Ok, it's been a while since I researched this. I can tell you that all the cards work though. If I remember correctly, this card is the best for 4 internal ports. This one if you only have a 1x slot available. And this one if you also want some eSATA ports

I have all these cards in my Hackintosh I'm typing on right now without any drivers. They all support hot swap as well.

u/c0deater · 2 pointsr/hackintosh

heres another one at half the price, however it appears to only work with windows... ill keep looking though
edit: forgot link, heres another one alsohttp://www.amazon.com/IO-Crest-Profile-Bracket-SI-PEX40064/dp/B00AZ9T3OU/ref=sr_1_39?s=pc&ie=UTF8&qid=1382827898&sr=1-39&keywords=pcie+to+sata+3

http://www.newegg.com/Product/Product.aspx?Item=N82E16815287028

and another: http://www.amazon.com/IO-Crest-HyperDuo-Brackets-SI-PEX40057/dp/B00AZ9T264/ref=sr_1_47?s=pc&amp;ie=UTF8&amp;qid=1382828245&amp;sr=1-47&amp;keywords=pcie+to+sata+3

heres my amazon search for the amazon links: http://www.amazon.com/s/ref=sr_pg_3?rh=n%3A172282%2Cn%3A541966%2Cn%3A193870011%2Cn%3A3012291011%2Cn%3A284718%2Ck%3Apcie+to+sata+3&amp;page=3&amp;sort=price&amp;keywords=pcie+to+sata+3&amp;ie=UTF8&amp;qid=1382828285

u/lordmycal · 1 pointr/Windows10

I used to have a sata controller that would do what you're talking about. You'd attach the SSD and the hard drive to the same controller and set it up so that the SSD would cache reads. I think it was called HyperDuo...

I think it was something like this: https://www.amazon.com/gp/product/B00AZ9T264/ref=oh_aui_search_detailpage?ie=UTF8&amp;psc=1

This looks like it would also fit the bill for you: https://www.amd.com/en/technologies/store-mi

u/presler · 1 pointr/hackintosh

also have a Z800 hackintosh (x5675, 48GB ram) and would recommend the following that work OOB in Sierra 10.12.6, no extra kexts needed.

Add USB3.0 ports and possible future expansion to a front panel using this
Add Sata 3 (6GB/s) capability to this monster using this.

u/Jibco · 1 pointr/buildapc

Yes, they are. A SATA card simply provides more ports so that more drives can be connected individually. It's possible to set up software RAID, but that can be a pain and is slower. A RAID card actually controls the RAID setup with its own chip. That card you linked would NOT work in a PCI-E slot; it is a slow PCI card which is different.

This card is basically the same as the other Amazon link, but it adds support for RAID 0 and RAID 1. Anything that supports more RAID levels will likely be more expensive. This is a good example.. It supports RAID 0, 1, 5, 10, 50, and JBOD.

u/PearsonFlyer · 1 pointr/radarr

You're going to want something like this: https://www.amazon.com/IO-Crest-2-port-Controller-SY-PEX40039/dp/B00AZ9T264?th=1

This is a hardware issue though, not really related in any way to Radarr.

u/infiniteGOAT · 1 pointr/PleX

After some research it looks like it would be better performance overall if the card was PCI-E 2.0 x2 or x4. The one you linked is x1 and will definitely work but all 4 hard drives connected to it will share the same PCI-E x1 lane (assuming they were all in use at the same time). Looks like this card may be better maybe? -https://www.amazon.com/dp/B00AZ9T264/ref=cm_sw_r_cp_dp_T2_99ADzbJY3M7A2 or https://www.amazon.com/dp/B00ESFEI2E/ref=cm_sw_r_cp_dp_T2_EjBDzbPASSG90

My use case scenario for this server is just to install Unraid and storing several TBs of media for plex streaming (plex server located on same network but different machine btw). So, that being said - in your opinion does the speed difference there even matter for the most part? The drives will all be WD RED. I may add an SSD or two for caching down the road but I would connect those straight to the onboard SATAs if I went that route.

Thanks in advance for helping with all this and sorry if I missed something obvious.

u/jeffrife · 1 pointr/buildapcsales

> LSI 9211

Are there certain specs to look for? Trying to find out the difference between this card and something like this that is a third of the price.

u/LimoncelloOnIce · 1 pointr/Amd

I bought a few of these from Amazon, there are non-RAID versions also.

RAID
https://www.amazon.com/gp/product/B00AZ9T264

non-RAID
https://www.amazon.com/CREST-Drive-Controller-Marvell-Chipset/dp/B00AZ9T41M

Either should work; I have some B350 boards (Gigabyte and Asus, no AsRock), but nothing is setup for 3k series yet, they need flashed. I have a 3600, I can test one and let you know if you want.

Also, does it matter what slot your Syba card is in?