Reddit reviews Mod Podge CS11302 Waterbase Sealer, Glue and Finish, 16 oz, Matte

For those looking to purchase the glues.

http://www.amazon.com/Podge-CS11302-Original-16-Ounce-Finish/dp/B001IKES5O/ref=sr_1_1?ie=UTF8&qid=1318916980&sr=8-1


http://www.amazon.com/Liquitex-Acrylic-Gloss-Heavy-Medium/dp/B001UNPE3Y/ref=sr_1_7?s=arts-crafts&ie=UTF8&qid=1318917242&sr=1-7





No referrers.

Finish them with this stuff for waterproofing, and you are good to go.

http://www.amazon.com/Podge-CS11302-Original-16-Ounce-Finish/dp/B001IKES5O

It was actually a pretty easy process.

1. Take guitar apart
   
2. Find an awesome book and rip out a bunch of pages
   
3. Cover the body in this lovely stuff called Mod Podge and start laying the pages all over. Repeat this process until it's completely covered.
   
4. I knew the finish was going to rub off eventually, so I let it dry and sprayed on a bunch of clearcloat.
   
5. Repeat step 4 a bunch of times (I think I put on 6 coats)
   
6. Assemble and voila.

Mod Podge, dude. It's amazing.

Mod* Podge

http://www.amazon.com/Podge-CS11302-Original-16-Ounce-Finish/dp/B001IKES5O/ref=sr_1_2?ie=UTF8&qid=1394679422&sr=8-2&keywords=mod+podge

I have never had a drug or alcohol problem, never smoked, have never been to jail and was in my 20's when I had my daughter. This is a huge win for me and I'm thrilled about it. My father's side of the family all have some serious addiction issues.

I'm new here and would love to try mod podge

Edit:
And thanks for the newbie contest :)

Nope.

Thank you, we used Modge Podge, here is a link;
http://amzn.com/B001IKES5O

Mod Podge

http://www.amazon.com/gp/aw/d/B001IKES5O

Modge podge
https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.amazon.com/Mod-Podge-Waterbase-16-Ounce-CS11302/dp/B001IKES5O&ved=2ahUKEwjNh7LT0uHhAhUMZKwKHfDJB58QFjAJegQIAxAB&usg=AOvVaw2iY6wF4RHodprO46OLQlB6

Mod Podge might be another option, although being in a bathroom, I'm not sure how well it would hold up to moisture from showering. It would be easier to remove later than varnish or shellac.

What's the stalk part of your bouquet made of? Can you mod podge sheet music to it?

Edit:fixed link

I have refinished a few tabletops using this method:

1. Paint the wood (use spray paint or whatever).
   
2. Print the logo on cardstock paper.
   
3. Cut it out.
   
4. Paste it to the wood using Mod Podge.
   
5. Then, seal it using something like this Pour On Finish. You could also use something like a clear acrylic sealer but this will not be as durable.
   
   Good Luck!

https://www.amazon.com/gp/product/B001IKES5O/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

I made this journal. This one in particular is for a friend of mine that is studying in California. I'm gonna give it to her when she comes back home to Georgia this summer (if she decides to come back).

The first journal I made was a Star Wars journal for my sister this past Christmas. It was so cool seeing her face when she realized that the rather plain looking book secretly hid her secretest geek joy.

I need more of this and this so that I can start making more journals. :) I wear a size nine ring.

Modpodge: http://www.amazon.com/arts-crafts-sewing/dp/B001IKES5O

Go here: http://www.caseyswood.com/shoppingcart/zen-cart/index.php?main_page=product_info&cPath=54&products_id=702

And buy ~200+ of those. It'll run you about $20.

Go to Michael's (or similar store) and buy:
http://www.amazon.com/Podge-CS11302-Original-16-Ounce-Finish/dp/B001IKES5O (note the matte finish)

and
http://www.michaels.com/darice-17-compartment-bead-organizer/10091119.html?cm_mmc=Sq1_Search-_-GooglePLA-_-Darice-_-Darice%2017%20Compartment%20Bead%20Organizer&utm_source=GooglePLA&utm_medium=cpc&utm_campaign=Darice&utm_term=Darice%2017%20Compartment%20Bead%20Organizer&utm_content=10091119&srccode=cii_17588969&cpncode=42-25094047-2

Also grab a cheap brush (you'll need it for the mod podge).

After you've printed and punched the tokens, paint a thinish layer of glue on a disc, apply the token, set aside and let it dry. Do... 50+ at a time. Do it while you watch your favorite TV show re-runs or something. Keep the tokens in vaguely first to last order. Once you've attached the last token to a disc, apply a thin layer of mod podge as a seal coat, starting with the first token you did. Apply a total of two sealing coats. Make sure they're thin and applied smoothly. Mod podge can add a texture if you brush it on that way.

Dirt cheap per token (somewhere in the neighborhood of $0.19/token) and they're nigh indestructible.

EDIT: The box is to store your tokens, by the way... I seemed to have forgotten to mention that.

"Mod Podge dries clear in approximately 15-20 minutes and can be sanded to a smooth finish. Apply with brush or sponge applicator. Close container after each use. Clean up with water while wet. Once dry, Mod Podge cannot be removed. Use as a puzzle saver, a sealer glue, a quick finish, a textured finish,or a build-up finish." Non-toxic."

https://www.amazon.com/Mod-Podge-Waterbase-16-Ounce-CS11302/dp/B001IKES5O

I have an alchemist in my group, and so I actually worked on a project like this awhile ago. Here's a few tips from my process.

get yourself a set of cheap cork top bottles. (check the suggested list below the main product as well, there are lots of interesting ones)

Rough them up with 80 grit sand paper. This will make them look weathered, but it will also help paint stick.

mix up some craft paints until you get a nice mud color and water it down quite a bit. Cover the bottles and let it sit for a few minutes till it starts to get tacky. Then use paper to whipe most of it off.

Splash some black specks of paint by dipping a hard bristled paint brush into some watered down black paint and then using your finger to flick the bristles toward the bottle. By now your bottle should be looking pretty grungy.

Once everything dries, paint over it with watered down white PVA glue. This will protect your paint job from chipping.

Make up some nice labels in photoshop or something similar, lookup old apothecary bottles on google image search as source material. Print them to light card stock. Weather them with coffee.

Glue them to the bottles. I've had the best luck with modge podge but use whatever's available.

Finally, go get yourself some "Edible Luster Dust." You can usually find it in grocery stores in the baking isle, but you can also order it online. This is DIFFERENT than edible glitter, use the luster.

Use the luster to make actual drinks. Mix it with something delicious and some food coloring. Don't use anything carbonated or you'll have a mess.

A nice detail is to either seal the cork on with wax, or put some fabric over the cork and tie it there by wrapping some twine around the neck of the bottle and tie on a pewter charm. this girl has a bunch of cool stuff like lions heads, skulls, owl heads, knight helmets, but they're not cheap :X

Anyway, There's a lot you can do to make potions super neat.

That's pretty damn creative! I like the idea of hairspray. Next time you're at the creative/hobby section of a store, there's a product called Mod Podge that would seal/waterproof your awesome design if you're interested.

There are different kinds of said product (matte, glossy, etc.)
Mod Podge Waterbase Sealer, Glue and Finish (16-Ounce), CS11302 Matte Finish https://www.amazon.com/dp/B001IKES5O/ref=cm_sw_r_cp_apa_mJ8RAbHPNZDT1

mod podge?

this is Mod Podge basically watery glue that goes on and seals in whatever is underneath it. its used for scrapbooking and decoupage

edit...some of my dead lighters, so far!. just a little mod podge on printer paper cutouts.

1.) Cut your paper pattern to just a little bit bigger than your surface. I got my paper from paper source

2.) Put down a thin layer of mod podge using a sponge brush. Make sure to cover the entire surface. I use matte, but you can use glossy or whatever you want

3.) put the paper down on the mod podge, being careful not to let air bubble develop

4.) push down the edges, but if they don't stick at this point it's not a big deal

5.) Let it dry for like 30-40 minutes

6.) When it's dry, use an exacto knife to trim the edge to your surface's dimensions. It's very important that the underlying glue already be dry because trying to cut it when it's still wet can tear the paper

7.) If the edges aren't totally glued down at this point, use a small sponge brush to touch them up and let them dry for 30-40 minutes

8.) Finally, with the paper glued down and cut to shape, use sponge brush to spread a thin layer of mod podge across the surface, making sure to spread it evenly. If you use a regular brush, your finish is going to get a much more textured feel to it, so that's why I prefer sponges. Let dry for 1 hour or more depending on how thick you applied the finish

What you see in the picture is already protected with mod podge matte and sealed for waterproofing after initial peeling. Didn't help.

I do papercrafting - a lot of what I do involves hand colouring images but there's loads of digi image sites where you can buy pre-coloured, so it's a lot of cutting and sticking :) A friend has severe asthma to the point where her shakes make it look like she's got Parkinson's and she makes works of art, so any level of dexterity can find a way!

Craft-wise you would be amazed what you can do with some Mod Podge and some old furniture. I managed to make this!

Can't a bitch get some Mod Podge glue up in here?

Thanks! I should have mentioned! Designed in Photoshop. Label size is 3.5"x4.5" for the hefeweizen and 3.5"x3.5" for the other two. Printed on regular copy paper with a laser jet printer. Glued on with a very, very light application of Mod Podge. In a test, this stuff came off relatively easy with some hot water and light scrubbing. It's a diluted white glue used for crafting.

Hi! I've been trying to add to my snake's enclosure this weekend by looking for driftwood after reading this post and now I have questions. Why small wood? The pieces I picked up may be 2-3 inches in diameter and 2 feet long. Should I bake them a little longer?

Also, how do I tell if wood is pine or cedar? If I coated the wood with some sort of Mod Podge-type of sealer, would that be ok, in the off chance that the pieces of wood I picked up were pine or cedar? Thank you so much for your time!!