Reddit reviews TyCa Industries 2x4 Target Stand Brackets AR500 Steel - 250lb Capacity - Powdercoated - Most Popular Stand On Amazon

We found 5 Reddit comments about TyCa Industries 2x4 Target Stand Brackets AR500 Steel - 250lb Capacity - Powdercoated - Most Popular Stand On Amazon. Here are the top ones, ranked by their Reddit score.

Made from AR500 steel so it won't matter if your aim isn't the best, you can't tear it up!Smart PATENTED design - you provide 3/4" Black Iron, EMT, or PVC pipes for legs, and standard 2x4 for target support bar to complete the standCorrosion resistant semi gloss powdercoat finishVery strong, holds 250 pounds easily. Now has 5/16" holes so pipe legs can be bolted to standCan use any length 2x4 - many targets can be mounted from one set of stands

Check price on Amazon

5 Reddit comments about TyCa Industries 2x4 Target Stand Brackets AR500 Steel - 250lb Capacity - Powdercoated - Most Popular Stand On Amazon:

u/Kuric1 · 11 pointsr/gundeals

Roll your own

TyCa Industries 2x4 Target Stand Brackets AR500 Steel - 250lb Capacity - Powdercoated - Most Popular Stand On Amazon https://www.amazon.com/dp/B00VR6XL16/ref=cm_sw_r_cp_apa_yaF.Bb3VPWMVV

2 - 10 ft 3/4" EMT from Lowe's
1 - 2x4
1 or 2 (depends on 1 or 2 holes in steel) - 1/2" x 4" carriage bolt w/ 2 washers and nut for each bolt and a drill.

2 Lengths of chain w/ s hooks

Or in my case a compression spring

Mine had 1 hole and this is my plate rack

http://imgur.com/a/LJVixjL

u/Captain-Kielbasa · 3 pointsr/longrange

So far the best way I've found without having my target break or drop is using the following:

2"x4" x (however wide you want the stand)
These stand brackets
3/4" black pipe (or galvanized, black just stands out better in my opinion), get whatever length you want the height of your target at, I went with 6' and happy so far.
1/2" bolts to attach to both the 2"x4"
1/2" chain to attach from the 2"x4" to the targets.
I had tried this set here and the 1/4" chain did not hold up after 20+ shots of .308.
These also work pretty well, but if you're shooting larger caliber rifles or handgun and hit them, they will tear a bit. I've hit them with .22lr and 9mm and they pass right through, but the .45acp and .30-30 left some nasty rips in them.
for my silhouette target, I use this when shooting 200 yards, it's on a 2"x4" with a box frame at the bottom, I also thrown a small 25lbs bag of sand on the base to be sure, it's worked amazingly well so far.

u/curzyk · 2 pointsr/ar15

I don't suppose you have a photo of your intended range location?

A steel hanging target is a lot of fun.

Steel gong set https://smile.amazon.com/gp/product/B0112P836O/
Gong stand https://smile.amazon.com/gp/product/B00VR6XL16/
2x4 as cross bar(probably just get a single 10' and have it cut in half)
Steel conduit as legs
Two hook screws
Two lengths of chain, two bolts, six washers, six nylock nuts
Some Rustoleum for color and longer term care

Front of steel: https://i.imgur.com/8p0KUkc.jpg

Top of steel: https://i.imgur.com/stCOm9c.jpg

Note: The offset between the surface of the steel and where the chain mounts to the bolt causes the gong to tilt forward slightly, which allows for more reliable downward deflection.

u/thejones16 · 1 pointr/guns

I'm looking at going this route potentially with these stand braces off Amazon:

2x4 Target Stand AR500 - Powdercoated - Most Popular Stand On Amazon https://www.amazon.com/dp/B00VR6XL16/ref=cm_sw_r_cp_awd_CVI9wb9Q36NE4

A 2x4 and some steel tube and you'll have a stand that will be pretty damn durable.

u/Tummynator · 1 pointr/gundeals

Great deal

How does your saw horse bracket compare to this?

Patented 2x4 Target Gong Stand AR500 Steel - 250lb Capacity - Powdercoated - Most Popular Stand On Amazon https://www.amazon.com/dp/B00VR6XL16/ref=cm_sw_r_cp_apa_Ocsezb95Z102K