Reddit reviews Yorkim 194 LED Bulbs Xenon White 6000k Super Bright 5th Generation, T10 LED Bulbs, 168 LED Bulb for Car Interior Dome Map Door Courtesy License Plate Lights W5W 2825, Pack of 10

Congratulations on getting an ND. If you are getting one with a manual transmission don't look at anything other than the Club or Club Brembo trim levels, as those are the only ones that come with a limited slip differential.

​

If you are going to be buying a used ND, be sure to read over the threads pertaining to roof and transmission issues on the early model cars. The TSB's put out by Mazda also give good guidelines as to what to look for. You should be okay buying a early year used car as long as you look over the known wear points on the roof and check the build date on the transmission.

​

The following is a good basic list of items that any ND owner could install that would be enjoyable upgrades as stand alone upgrades or as a starting point for further modifications dependent on intended use.

​

3M Invisible Bra for the front bumper. Can't stress this enough, this car eats rocks to the face like crazy...

Stubby Antenna, stock one looks like a RC car antenna

Interior dome light and trunk light LEDs

Reverse light LEDs

Side marker and license plate light LEDs

Wheel Spacers if you intend to keep the stock wheels, Stock wheels are very sunk into the wheel well and look strange from the factory.

Sway bars, the stock bars are very thin and allow LOTS of body roll. Of all the parts that I listed, only the front sway bar has a high degree of difficulty to install assuming you have basic mechanical skills.

​

Stock exhaust is very anemic, recommend some muffler choices based on if you are looking for a more refined but quiet exhaust or something louder and more exotic. Don't bother with midpipe unless you are looking at headers as well. Cold air intakes for the ND have been proven to do absolutely nothing via dyno testing.

​

HKS Legamax Premium. More on the quiet side, gets louder with a great refined sound as it breaks in.

https://www.youtube.com/watch?v=a-XdBGS1nwI

​

Roadster Sport Race. Loudest exhaust but still okay to daily drive. Has an exotic sound.

https://www.youtube.com/watch?v=DvK18FsWilE

​

Also, I Just had the Innovated Dynamics spoiler in your picture delivered. FYI, Jose the guy that makes these is known for long delays and not answering emails /phone calls. If you order one of these spoilers don't expect to see it for 4 to 6 weeks. I'll post up some pictures once it is painted and mounted.

​

I have more upgrades done to my 16' Jet Black Mica ND with more planned for the future. DM me if you want to see pictures of my car on IG or if you would like an additional opinion on parts I have not covered in this post.

Yorkim 194 LED Bulbs White 6000k... https://www.amazon.com/dp/B00JRE38EA?ref=yo_pop_ma_swf

Yorkim 31mm LED Bulbs White Super... https://www.amazon.com/dp/B00ZKTXJA4?ref=yo_pop_ma_swf

I use this LED light:

https://www.amazon.com/gp/product/B00WVJR0D8/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

It works very well and it’s super bright. If you do change out your bulb, switch the two corner running lights to LED as well. I used these:

https://www.amazon.com/gp/product/B00JRE38EA/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

Installation was a breeze. You can find install videos on YouTube.

I used THESE ones. Amazon Prime for $9.99.

Very bright, but word for the wise, Do not replace your brights indicator with one of these. I did and it nearly blinded me with blue light when I used the brights. Ended up switching it back out for one of the original bulbs. They are nice in the turn signals however as they're nice and bright, keeping from being an idiot that lets them just run after a turn.

These lights also fit into the shifting plate and the 4WD plate of you've got it. Just enough to do them all vice the brights.

EDIT: I also did a little modification while I painted my instrument cluster of putting aluminum tape around the backside of the tac and speedo to try and reflect the light a little better. It seems to have worked a little but not much.

these

Sure!

194 LED Light bulb, Yorkim® 2015 Newest, 5th Generation, Interior Lights for W5W 194 168 2825 T10 Wedge 5-smd 5050, Replacement and Reverse T10 White Bulbs, Used For Signal Lights, Trunk Lights, Dashboard Lights, Parking Lights, With Great Brightness and Longer Life(Pack of 10) https://www.amazon.com/dp/B00JRE38EA/ref=cm_sw_r_cp_awd_4zGGwb0XX9BSZ

I picked up a 2017 EX-T in December and the very first thing I did was upgrade the lights to LED.

Headlights: H11 bulbs, 6000k to match the DRL

SiriusLED Extremely Bright COB LED Chip 8000 Lumens Headlights Fog Lights Bulb Conversion Kit H11 H8 6000K Xenon White https://www.amazon.com/dp/B01J6YGGZ8/ref=cm_sw_r_cp_apa_pG8KybF2ZQW7H

Fog lights: H8 bulbs, 6000k to match

SiriusLED H8 Size DRL Fog Light LED 30W 6000k Super Bright White Projection Bulb Pack of 2 https://www.amazon.com/dp/B00N5BAWYK/ref=cm_sw_r_cp_apap_kv23EdvoyYOR1

Highbeams: 9005 bulbs, 6000k to match

SiriusLED X2 Extremely Bright COB LED Chip 8000 Lumens Headlights Fog Lights Bulb Conversion Kit 9005 HB3 6000K Xenon White https://www.amazon.com/dp/B01M049TFK/ref=cm_sw_r_cp_apap_dbXKRS6LoHmsc

Interior lights: 194 LED bulbs, bright white

194 LED Light bulb, Yorkim 2015 Newest, 5th Generation, Interior Lights for W5W 194 168 2825 T10 Wedge 5-smd 5050, Replacement and Reverse T10 White Bulbs (Pack of 10)- White https://www.amazon.com/dp/B00JRE38EA/ref=cm_sw_r_cp_apa_rJ8KybNN3S095


The results have been amazing, I'm very pleased and haven't had any issues. You will need to reverse the polarity of the plugs though.

God I hope this formats correctly - I am a neophyte.

Exhaust - http://www.ixilusa.com/ixil-l3xb-black-hyperlow-xl-full-exhaust-yamaha-mt-07-2014-2015/

Super deep and loud sound - videos online don't do it justice, its unbelievably loud when the baffles are out. Had to have the cat cut out of it. Be aware they have a cat in the V section before the end of the pipe.

Removed the snorkel covering the airbox - I was told its basically blocks airflow.

ECU Flash / Dyno by 2wheelDynoWorks - https://2wheeldynoworks.com/shop/ecu-flashing-service/15-17-yamaha-fz07-mail-in-ecu-flashing-service/

Nels himself worked on my bike - super stoked (shout out to Nate too) They have the best customer service.

Active Tune - https://2wheeldynoworks.com/shop/ecu-flashing-service/yamaha-activetune-afr-closed-loop-self-tuning-ecu-kit-2/

Tune as you go

Bike side harness - https://2wheeldynoworks.com/shop/ecu-flashing-service/ftlink-v1-1-6-pin-bike-side-harnesses/

For tuning later

Windscreen - https://www.revzilla.com/motorcycle/puig-touring-naked-new-generation-windscreen-yamaha-mt-07-2018

I got light smoke, I think it goes better with the bike and pushes wind over my shoulders even at 80+ mph

Protection - https://tstindustries.com/Womet-Tech-Total-Crash-Protection-Pack-for-Yamaha-FZ-07-MT-07-2015.html

Basically got everything from this except the bar ends

Bar Ends - https://motostarz.com/collections/mt-07-2018/products/rhinomoto-barends-mirror-mounts-for-yamaha-fz-mt-models

Super easy to replace mirrors etc with these - and they add protection

Throttle tube - https://www.amazon.com/gp/product/B005C59NO2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

90 to 60 degree conversion - its amazing for the price

Dash Screen Protector - https://www.amazon.com/gp/product/B078SMP4ND/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Mirror stem deletes - https://www.amazon.com/gp/product/B07BN8QGPV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Current Mirrors - https://www.amazon.com/gp/product/B01N6GB7DZ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Mirrors in photo - https://www.amazon.com/gp/product/B003RESHVU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I like the CRG Mirrors but they get bumped and are hard to readjust - the cheap ebay/amazon mirrors work great

Headlight replacement - https://www.amazon.com/gp/product/B01H6NZ5QW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Signal replacement LED bulbs - https://www.amazon.com/gp/product/B06XK4PL33/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Super bright replacements for stock bulbs - used the original housings, they plug right in

Running light LED replacements - https://www.amazon.com/gp/product/B00JRE38EA/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

For inside the headlight housing

Tail Tidy - https://www.amazon.com/gp/product/B01BH5YGOM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Flasher Relay for LEDs - https://www.amazon.com/gp/product/B00RM26LXO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Levers - https://www.ebay.com/itm/CNC-Brake-Clutch-Yamaha-MT-07-FZ-07-2014-2018-Adjustable-Engrave-Long-Lever/123350737715?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D17a37c1b2d204ffcba65903d19a97b4a%26pid%3D100005%26rk%3D4%26rkt%3D12%26sd%3D122997203335%26itm%3D123350737715&_trksid=p2047675.c100005.m1851

Passenger peg deletes - https://www.ebay.com/itm/for-YAMAHA-MT07-FZ07-Footrest-Cover-Passenger-Footpeg-Removal-Delete-Kit-2014/253869999740?hash=item3b1bd4c67c:g:3qEAAOSw0JVbm1FQ:rk:1:pf:0

I removed the passenger pegs, needed a bracket to hold the brake fluid reservoir - also cleaned up the pegs

Havent done the brakes yet - going to replace the lines etc with steel braid.

Also want to do a sprocket / chain swap for acceleration

I used a quadlock phone mount for a little bit - but took it off because I was playing with my phone too much.

I installed an LED headlight. It added a lot more visibility at night. Took 10 minutes or less to do.

https://www.amazon.com/gp/product/B01KFBPBC0/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

Also added white LED run lights so the entire front is bright white

https://www.amazon.com/gp/product/B00JRE38EA/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

​

I watched these two videos for any help.

https://www.youtube.com/watch?v=yCoOcn9yuIE

https://www.youtube.com/watch?v=ehZbBUxD67w

Headlights (you only need one pair. the cutoff is outstanding)

Map lights, license plate lights, running tail lights, and side marker lights

Reverse lights

Front turn signals (accessible from under the vehicle - pin remover and 10mm socket needed)

Rear turn signals (requires tail light disassembly)

Turn signal resistors (required to prevent hyperflashing; soldering is recommended)

Brake lights (requires tail light disassembly)

Daytime-running lights (pliers needed)

Trunk light and dome light

I used these lights, they work for most of the lights you will encounter in a Camry, no dead ones, been working great for a year so far: 194 LED Light bulb, Yorkim 2017... https://www.amazon.com/dp/B00JRE38EA?ref=ppx_pop_mob_ap_share

Use this for the reverse:
AUXITO 912 921 LED Backup Light... https://www.amazon.com/dp/B0728DYR9H?ref=ppx_pop_mob_ap_share

I use Sylvania Silver Star Ultra for headlights

I also replaced my assembly with this:
Anzo USA 121181 Toyota Camry Projector with Halo/Black Clear with Amber Reflectors Headlight Assembly - (Sold in Pairs) https://www.amazon.com/dp/B0038AX6W8/ref=cm_sw_r_cp_apa_i_X9ACCb8QDG00C

194 LED Light bulb, Yorkim® 2015 Newest, 5th Generation, Interior Lights for W5W 194 168 2825 T10 Wedge 5-smd 5050, Replacement and Reverse T10 White Bulbs (Pack of 10)- White https://www.amazon.com/dp/B00JRE38EA/ref=cm_sw_r_cp_api_iqUHxbJFNT4DD

I have these and they're great.

For my 96 xj (full cluster with tach) my dash took 8 194 LEDs. Then 2 194's, for the transfer case and trans shifters. Then I replaced 2 74 LED's. One for the key insert ring and one for the hvac. There are a few more 74 slots behind the switches to the left and right of your wheel.

You have to unscrew the steering wheel plastic shroud. It takes a torx 15 I believe, you need a long torx screwdriver for this, a bit won't fit up there. Then you pull the dash panel off, then four screws around the instrument panel, another 1-2 screws near the warning lights area on the left side. Pull out the instrument panel a bit and you will have to disconnect two plugs in the back, one behind the warning lights and one in the middle of the cluster. Push in and pull up on the middle plug to get it out. Then pull the instrument panel and untwist the 8 ports for the 194 lights, then put it all back.

You can replace the warning lights if you want with 74's as well but that's a lot of LEDs, maybe 8 or so.
The hvac light port is on the upper right side when you unscrew the four screws and pull it out a bit.

For the 194's I got these Yorkim LEDs off Amazon, cheaper than superbright and seem to be great quality. I love them so far. https://www.amazon.com/gp/product/B00JRE38EA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

These are the 74's I bought. You might be able to find cheaper. https://www.superbrightleds.com/moreinfo/miniature-wedge-base/74-led-bulb-1-smd-led-miniature-wedge-retrofit-car/227/

These and these should cover all of our interior lights. Don't be scared by the made in china brand, I have used these in my Rav4, CRV and Ridgeline with great success!

EDIT: also the 194's replace your parking lights up front, and those look great with LED's

I used these. the same bulbs are the same as the front interior lights and the front door lights.