(Part 2) Best tablet screen protectors according to redditors

Yes, it actually does work. I've used it on my 6 Plus twice. Here's a link on Amazon: Fusso Oleophobic Coating. For reference: the "Tablet PC" version is the exact same fluid as the "Smartphone" version, but a bigger bottle.

PSA: Have the volume up to hear the sound!

I write a lot. I am not an artist by any means, and my handwriting looks like worms are crawling on the paper, but i like to takes notes rather than type because if allows me to remember things that are written rather than typed.

So I've been trying various type of paperlike films, and I came to the conclusion that this is far the best paperlike screen protector when it comes to writing on iPads.

It also has matte finish so it does prevent fingerprints being visible, yet it does reduce the beauty of retina display, but it's not that bad.

The film is actually made in Japan, and it's not cheap. Amazon has it for $23. https://www.amazon.com/ELECOM-Paper-Feel-Anti-Fingerprint-Anti-Scratch-Bubble-Free/dp/B07KZHVTD6/ref=sr_1_1?crid=1I6COBWXGGI6Z&keywords=elecom+ipad+pro+11&qid=1556199167&s=gateway&sprefix=elecom+%2Caps%2C541&sr=8-1

There are a couple screen protectors with a notch for the Face ID and camera like this

I would recommend the ELECOM over the Paperlike. The paperlike feels more like writing on fine cartridge paper resting on glass while the elecom is more like heavier drawing paper. IMO, the Paperlike just isn't paper-like enough. And it's more expensive. Perhaps the Paperlike 2 is going make some meaningful changes?

I bought the "supershieldz" screen protector off of Amazon and I'm pretty happy with it. It's not quite as "scratchy" and paper-like, but it also has less of the sparkly color distortion. It's a pretty good trade-off in my opinion, and you get a 3 pack for $9. It greatly enhanced my ability to draw, so for the price I'd say it's worth a try.

https://www.amazon.com/Supershieldz-Generation-Anti-Glare-Anti-Fingerprint-Replacement/dp/B07K1JR66F

https://www.amazon.com/gp/product/B01FH3OUSC/ref=ox_sc_sfl_title_4?ie=UTF8&psc=1&smid=A3UUO73MLBH19W

https://www.amazon.com/dp/B07G3Z1LBK?ref=yo_pop_ma_swf

And case I’m using

OtterBox Symmetry Series 360 Case for 12.9-inch iPad Pro (3rd Generation)

https://store.apple.com/xc/product/HMKL2ZM/A

You could just get a screen protector if you're that worried, and yes there are screen protectors that allow face ID, one of which I am using this very moment. I believe the tips are silicone which I wouldn't imagine is tough enough to scratch glass. Also you don't have to press hard with the pencil, you can use it very lightly and it still works. You should be safe no matter which choice you make, but I would use a screen protector to guarantee.

Read about issues with the PaperLike (surface texture wearing off etc), so I got this https://www.amazon.com/Elecom-Paper-Feel-Anti-Fingerprint-Anti-Scratch-Bubble-Free/dp/B07KZHVTD6 and seems to work pretty well!

Had this brand on my 2015 iPad Pro 12.9 and just ordered the new model for the 2018 iPad Pro 12.9. It has a cut out for the front camera, and the slightly matte finish makes a HUGE difference for me and my handwritten notes. You’ll never get the same toothiness as actual paper, but the slightly increased friction of this cover really improves my writing experience vs “writing on glass” without it.

https://www.amazon.com/dp/B07K1JR66F/ref=cm_sw_r_cp_api_ved9Bb2N8XEX6

I'm using this one at the moment and currently loving it. http://www.amazon.com/gp/aw/cr/B00KI2BGRG/ref=mw_dp_cr
I love the matte finish to any screen protector on my electronics. At first I was worried about the writing since I use my pen heavily on taking notes but there's no problem at all.

No issues for me with Face ID with tempered glass screen protector, iPad Pro 12.9

https://www.amazon.co.uk/dp/B07G3Z1LBK?ref=yo_pop_ma_swf. If you can find the equivalent version in your country then I'd suggest to get these. It covers the face ID but has a cutout for the microphone on the front of the display.

No impact at all in my day to day usage

got it here:

https://www.amazon.com/gp/product/B07SQWV4QH/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

13$ + shipping

works really well!

http://www.amazon.com/Generic-Tempered-Protector-Compatible-Microsoft/dp/B00FZEWF86/ref=sr_1_1?ie=UTF8&qid=1397623571&sr=8-1&keywords=surface+pro+tempered+glass

I purchased this one and love it... it fit the screen perfectly, there are actually holes cut to fit the Surface Pro 2, I think the term generic is wrong, this is clearly made for the SP2.

The first one I received was cracked and I emailed them, they sent a replacement quickly.

I've been using a Supershieldz Screen Protector since I got mine. I've had the same one on since I got the them and it's been pretty great. Despite the stupid fucking product name...

I haven't found much, but it does sound like it's possible to remove it.

I found this on an Apple Discussion Board, which says you should only use a "soft, slightly damp, lint-free cloth" and to not "use window cleaners, household cleaners, compressed air, aerosol sprays, solvents, alcohol, ammonia, or abrasives".

I think the easiest way to fix this is to use a screen protector. But, if you're feel like a DIY project, I found this. I have NOT done this before, so I take no responsibility.

Good luck!

Yeah no worries, hope it works out. btw: Here's an iCarez matte for SP4 which I believe is the same as SP2017. https://www.amazon.com/iCarez-Protector-Microsoft-12-3-Inch-Replacement/dp/B016F0VJ9Y/ref=sr_1_1?ie=UTF8&qid=1519636065&sr=8-1&keywords=icarez+surface+pro

This is the one that's on my Amazon cart: https://www.amazon.com/iCarez-Protector-Microsoft-12-3-Inch-Installation/dp/B016F0VJ9Y/ref=pd_rhf_sc_p_img_2?_encoding=UTF8&psc=1&refRID=Y5AJY8DH4P9HXP745PC9

But since apparently it's not exactly the same screen as the SP6, I'll probably wait it out.

I got this one: OMOTON [3 Pack] Screen Protector for Samsung Galaxy Tab S6 / Tab S5e 10.5 inch - Tempered Glass/Scratch Resistant https://www.amazon.com/dp/B07NV7DXMX/ref=cm_sw_r_cp_taa_NBvMDbYW3VFTZ

I'm still waiting for it to completely dry because I did it with the shower on to get rid of potential dust, but so far so good. Basically covers the entire width of the Galaxy Tab which really surprised me. My Tab S4 one as far as I remember didn't.

Pretty sure it's another OMOTON screen protector though. I may try Spigen in the future.

Hey! So glad you reached out. Ok, so, there are like 1 billion different was to approach digital painting and get what you're asking. But if we used Kyrie0201's style (which feels like airbrushing rather than, say, oils, if we're pretending digital mimics tactile mediums) here's what you need.

The tonal studt you've done is decent but you needed to keep going with the lighting/volume painting before trying color. Once it looks like a finish B&W piece, then you add a color layer or two on tops, and start painting over it The layer will add pigment without losing your tones. This is an ok way to paint but I've found that it A) can be very limiting and you spend a lot of time searching for the right color, hue, and layer settings, most likely adding more and more layers to try and get it right and B.) doesn't teach you anything about color. When i use this technique, I do the b&W layer, then add some rough basic colors over top to feel out my color scheme, then take that and add another layer where I am painting with straight, opaque pigment to get it the last 30% of the way to finish. This is sort of it, where he adds the red to the hat. Except then I add another "normal" layer on top and paint in more details and make some changes. Painting just over the B&W tones will likely get you a sort of soft, blurry, often muddy look that can get ugly really fast if you don't have your color theory down pat!

• Layers: Use your layers in photoshop. If you're going to experiment with something, do it on a separate layer. if it doesn't work, delete it. if it does, merge it down!
  
  
• Blending: Mess with your opacity and your flow settings on your brush. If you are using the standard round brush, I usually have my opacity to about 80 and my flow to about 80. Then I vary how hard and soft the edge is depending on the mark I want to make. You can even mess with the angle of the brush to help, too.
  
  
• Color selecting: as you are trying to blend areas, use your alt/color select option judiciously. Say you have a dark brown and a light brown, and you want a gradient. You throw the light on top of the dark where your highlight is, and the edges have a bit of mush (thanks to your opacity and flow settings). Then you go where they overlap (they'll have created a new color) and paint and bit of that further in each direction. And on and on until it's blended how you want it.
  
  
• Clean lines: This is mostly about practice, but maybe partly about tools. It's much easier to get cleaner lines if you have a Cintique or alternative than on a tablet. They also are probably doing several underdrawings (really ugly, rough sketches) and then going over that on a new layer until they have the line quality they want. Using the right brush and brush settings also helps.
  
  
• Lines: You can do a few things. I usually have my line art on a separate, top layer set to about 40% opacity, and do my painting underneath. Once I've laid in the basics, I can turn that layer off completely and just go for it. Some people paint on top of their lines like you would with traditional media.
  
  Now, this style you're emulating can be considered pretty over-used in the art community. It is "pretty" but static, looks very "digital" and seems to be well over-used (There's a reason 80's airbrushing wasn't in vogue for long). So, if you want to branch out once you've got a good handle on things, Start looking into using some different kinds of brushes. I personally use the heck out of Kyle T. Webster's brush packs.
  
  Best of luck!

http://www.amazon.com/Anti-fingerprint-Oleophobic-Coating-Fusso-TabletPC/dp/B008H38HSO/ref=sr_1_2?ie=UTF8&qid=1426901431&sr=8-2&keywords=fusso

There ya go.

I got these; work very well with the Pencil. Love it!

Just be careful of dust when installing. A hot-water mist bathroom works well.

[3-Pack] Supershieldz- Anti-Glare & Anti-Fingerprint (Matte) Screen Protector For Apple iPad Pro 9.7 inch -Lifetime Replacements Warranty - Retail Packaging https://www.amazon.com/dp/B01BZFRC0Y/ref=cm_sw_r_cp_tai_MAoKzbDFNVZKB

I'm using this one https://www.amazon.com/dp/B00UAILN4E after testing an antiglare one that gave me problems.
The package of this gave me everything to apply the glass without getting bubbles. It's 2.5mm and I don't notice any touch problem, everything with clicks and gesture is fine and the new surface pen draws flawlessly.
I kinda wish for a tempered + antiglare thing but it doesn't seem to be an option? At least I can keep the luminosity on 25% (antiglare decreses the brightness a bit).

Art is like going to the gym. You get better by doing it repeatedly and more often. If nothing else, you should get a notepad or something and try to draw straight lines till you've filled the page once a day. I started doing this (Though I haven't kept up with it well), and I think the simple act of actively trying to control your lines into doing what you want helps a lot with getting it 'right' the first time.

yeah, cintiqs are expensive as all hell, but it's sooo much nicer than just a drawing tablet. I've heard that the other brand screen tablets (Such as this huion) are a hell of a lot cheaper than my 800 dollar tablet. No idea as to whether or not it's as good as a cintiq, but it's definitely a lot more screen for your money. it would certainly be easier in my eyes to justify spending the same money one would on a video game console for a hobby that develops a skill.

I ordered this one: https://www.amazon.com/gp/product/B07NV7DXMX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 So far it's really nice. I had to reregister my fingerprints, but after that it's been great with everything.

I used this one: https://www.amazon.com/gp/product/B01FH3OUSC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

It makes the whites look a little rainbowy when you get really close but other than that I think it's great. It can be a little tricky to install since the fit is so precise though. I can upload photos if you want.

I'd suggest at least a screen protector. Sure the type cover protects the screen, but something could happen while you are using the device or something. I got this one at amazon, not sure if it would fit the SP6 tho. Regarding the back, i also ask myself that question as i have a relatively new SP 2017. I got a case at amazon also, i like it but don't use all the time cause i love the magnesium finish on the SP and how it looks without any case.

A lot of people use skins from DBrand, you could try that out too.

Check out this thread http://forum.notebookreview.com/threads/dell-xps-15-9550-anti-glare-options.794041/page-2

and

https://www.amazon.com/Screen-Protector-TouchScreen-Anti-Glare-Shield/dp/B01FH3OUSC

Note: There are different versions for touch and non touch screens.

this is it, but this is from the Australian site

There are ones on amazon that have a notch cutout and work finelink

Hi, I bought this one and it’s excellent, great fit and quality. Also bought this screen protector. Also excellent.

I use this for my iPad 2018
https://www.amazon.com/dp/B013JZCAZK - Sparin

and this for my iPad 2017
https://www.amazon.com/dp/B00X28GH0Y - JetTech

I decided to change to Sparin because I heard that people used it with the Apple Pencil + iPad 2018 and it worked fine. The Jettech one comes with two though, so if you fail to affix the screen protector (too many bubbles etc), you can reset / use another one. Sparin comes with only one screen protector.

I (kind of) use UAG Metropolis cases for both of them and the screen protectors fit very well. The edges do not get pushed because UAG has small yet very good corner protections.

I have an iPad 1 from 8+ years ago (which still works), but when I bought it, I bought a cheap folio case (about 14 euros). I dropped it on the floor about a week after I bought it (from my bed), and the corner was dented! It has one black (dented) corner now.

Since then, I promise myself the next time I buy a new iPad, I'll never skimp on a case, ever.

Because I seem to drop my iPad at least twice, I use tempered glass instead of matte/plastic screen protectors/none at all for better protection.

I have this one on my Surface 3 and love it. It has a paper touch feel to it, which feels nice when i'm running my finger on it.

There is definitely a sensitive issue. I’ve been using a glass screen protector for two weeks and scrolling (Mainly on Facebook) is really annoying due 50% of the times is unresponsive. I have to wait until other manufacturers build better choices and solve this issue.
This is the one I’m having trouble with: JETech Screen Protector for iPad Pro 11-Inch (2018 Release Edge to Edge Liquid Retina Display), Tempered Glass Film https://www.amazon.com/dp/B07GZTRC8Z/ref=cm_sw_r_cp_api_uMI9BbF7XZD0M

https://www.amazon.de/gp/product/B07G3Z1LBK/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Only has a small hole, using it now on my iPad Pro 12.9 2018 and FaceID still works perfect with it.

I can confidently tell you that if you want the best note taking experience with a screen protector, get this one http://www.amazon.com/gp/product/B00KI2BGRG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Illumishield. It's the matte version, and some people complaint about their pen tips going bad or making really bad noises whe writing. Do not listen, just do this. It's going to sound really weird BUT IT WORKS, and it is an awesome super smooth pen on paper feeling AFTER you do this: apply as directed, then grab the little lint free cloth and use it to cover a credit card or the little plastic they give you and rub the the protected edge or the card with it, do it a lot. Then, and here comes the weird part, dab a little bit of vaseline and rub that all over the screen protector, careful not to get it into the speakers. Now use a paper towel to absorb the excess, and finally clean it again with the lint free cloth. Voilà. You got yourself an amazing nonreflective super smooth surface.

Here is the 9.7" version from the US Amazon.

https://www.amazon.com/PAZLOG-Tempered-Glass-Fingerprint-Dispersion-Replacement/dp/B07SQWV4QH

I'm personally using the Supershieldz and it's the best bang for your buck. The Elecom has even less grain but cost 3 times more.

I use these nibs with the Surface Pen with single button on flat edge. They wear down on the paper-like screen protector I have. I love them both.

https://www.amazon.com/dp/B073PYF7P2/ref=cm_sw_em_r_mt_dp_U_FBguDbFHB0K5Y

https://www.amazon.com/gp/product/B076SRQ1F6/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

I'd assume any matte screen protector would work well, this is the one I have and it definitely feels more like paper, http://www.amazon.com/Microsoft-Protector-Lifetime-Replacement-Warranty/dp/B016F0VJ9Y

I use the Mr. Shield matte ones from Amazon and they're great. Put them on all 6 shields I bought for work and no issues yet.

http://www.amazon.com/Mr-Shield-Microsoft-Anti-glare-Replacement/dp/B00KGRKRGE/ref=sr_1_1?ie=UTF8&qid=1407934137&sr=8-1&keywords=mr+shield+surface+pro+3

https://www.amazon.co.uk/gp/aw/d/B00KI2BGRG/ref=ya_aw_od_pi?ie=UTF8&psc=1

Got one of these, but I don't know if they make it for the SP4...I mean they probably should.
Regarding the responsiveness, I never seemed to have any issues.

Here you go!

I bought the same set up as you.. i got it all on with no problem (well i have a SMALL speck in 1 place but not bad.. but i'm gonna be pulling it off anyways.. mine has no micro bubbles or anything.. but i'll be taking it off because of the marks left behind by the stylus.. they do SLOWLY go away.. but never go 100% away..i think its just he kind of screen protector it is..

Its fine if you only use your finger.. but anything that pointed seems to do the same..

So what i'm looking at doing is scrapping the screen protector and putting on a tempered glass one.. as long as you can get it on without any dust or anything should be great..

kinda hard to find one tho.. heres the one i'm thinking about
http://www.amazon.com/Generic-Tempered-Protector-Compatible-Microsoft/dp/B00FZEWF86


but as far as them replacing it.. they say they will.. never tried my self.. but they will only replace the screen protector the carbon fiber skin does NOT have the warranty

I have this screen protector, SPARIN Screen Protector for Galaxy Tab S6/Tab S5e 10.5 inch, [3-Pack] Samsung Galaxy Tab S6/Tab S5e Tempered Glass Screen Protector with S-Pen Compatible,Scratch Resistant https://www.amazon.com/dp/B07RHF6QSN/ref=cm_sw_r_cp_taa_WWu0DbERYWEK9

This case and keyboard combo, Fintie Keyboard Case for Samsung Galaxy Tab S6 10.5" 2019 (Model SM-T860/T865/T867), [Supports S Pen Wireless Charging] Slim Cover w/Detachable Wireless Bluetooth Keyboard, Navy https://www.amazon.com/dp/B07X23KZLK/ref=cm_sw_r_cp_taa_WYu0Db91QMHBX

Total cost was right around $40, shipped. The keyboard is plastic, so it's easy to type on. The bluetooth connects in a second or two (it doesn't use the pin connector on the bottom of the tablet). The case provides very good protection. From the looks of the Samsung official case, this Fintie case has vastly superior drop protection. The keyboard attaches to the case with magnets, so it stays put once it's opened. There's a slot for the S-pen that is open when the case is open, and when the case is closed the flap fully covers the S-pen so it doesn't fall off. There's two things about the keyboard that are a bit annoying, however. When you open the case to use your tablet, the keyboard has to be picked up off the case and put into position that will allow the tablet to be propped up by the case. And then the process reversed when you close it. It takes about 3 seconds so it's not going to ruin your day or anything, but still needs to be understood that it's not a simple open and close like a laptop. The second thing is that there's no autocorrect. Maybe there's an app that can give you autocorrect while using the keyboard, but I've never looked into it.

EDIT: The screen protector is perfectly fine. It fits and there's a cutout for the front facing camera. Not much more to say about a screen protector. I used the hinge method detailed in the instructions and got it installed perfectly the first time. So I have two spares for future use. On a side note, the reviews for the keyboard have an issue some are reporting. The keyboard leaves marks on the screen when the case is closed. What I've done to remedy that is cut out one of the sides of the microfiber pouch that tablet is shipped in. I put that inbetween the keyboard and the screen when I close the case. I have no marks at all

It is actually rather hard to find as a consumer product rather than wholesale, however I have seen it on EBay and on Amazon. Otherwise I have seen people use the turtle wax oleophobic glass solution as well, it's basically made to do the provide the same oleophic coating to a car windshield as what you would want on a phone.

I got it on Amazon here’s the link: iCarez [Anti-Glare] Matte Screen Protector for Microsoft Surface Book 2 (2017) 13.5-Inch Easy Install with Lifetime Replacement Warranty https://www.amazon.com/dp/B076SRQ1F6/ref=cm_sw_r_cp_api_i_XNnyCbR5RTYJ2


It helps a lot with writing! Instead of it feeling like you’re writing on ice it feels almost identical to paper and pencil.

They all lower the screen quality, it just depends on what you can tolerate! I had both a glass and matte (plastic) screen protector on my 9.7 and "more like paper" is really a relative term :)

I have this tempered glass on on my 10.5 now and it does introduce a lot of reflectivity and "grain" to the display. Not enough to bug me, but is slick and with the pencil. https://www.amazon.com/Screen-Protector-amFilm-Tempered-Rounded/dp/B071ZFR7G2/ref=sr_1_3?s=pc&ie=UTF8&qid=1498769224&sr=1-3-spons&keywords=ipad+pro+10.5+screen+protector&psc=1

I had this matte one on my 9.7 and it reduced the clarity and brightness a bit. It still looked good, but I could tell as I was putting it on that my iPad was going to take a hit. Any additional friction for a "paper like feel" was minimal https://www.amazon.com/Protector-Tech-Armor-Anti-Glare-Anti-Fingerprint/dp/B01N4WDVKG/ref=sr_1_9?ie=UTF8&qid=1498769301&sr=8-9&keywords=ipad+pro+9.7+matte+screen+protector

I bought the iCarez off amazon for the surface pro, not sure if they have a version for the surface book. I've had no problems with this one and it def cuts down on the glare. It even improves the drawing experience (more like paper) if you care about that. I recommend it for sure.

​

edit:link

https://www.amazon.com/iCarez-Anti-Glare-Protector-Microsoft-Replacement/dp/B076SRQ1F6/ref=sr_1_2?crid=WIWOUE0JAGOG&keywords=icarez+surface+book&qid=1556679201&s=gateway&sprefix=icarez+sur%2Celectronics%2C170&sr=8-2

I'm using a tempered glass and it works well with the optical fingerprint sensor. I like this one in particular because of the very small U-shaped cutout for the camera.

I bought a cheap one on amazon. The official is like 30€, mine is 10€. I don’t feel mine it’s too grainy or less precise. Tech Armor - 2 protectores de pantalla para iPad Pro (9,7") de Apple - Antirreflejos y antihuellas dactilares https://www.amazon.es/dp/B01N4WDVKG/ref=cm_sw_r_cp_api_i_i-KYDbXTSXJ5Y

https://www.amazon.com/dp/B01N4WDVKG/ref=cm_sw_em_r_mt_dp_U_Lt.QDbFN52NR2

Asus Vivotab Note 8 - A friend let me know about this, it uses wacom technology and is around/under $200. This is pretty much the only tablet this cheap where you can actually draw on the "screen" that I've found.

http://forum.tabletpcreview.com/forums/asus.1024/ --> forums on the tablet that can give you more info.

There were a couple others that are more expensive: [$300-$400]

Old cintiq model: https://www.amazon.com/Wacom-Cintiq-12WX-12-Inch-Display/dp/B00115OFJK/ref=sr_1_5?s=pc&ie=UTF8&qid=1475485795&sr=1-5&keywords=cintiq+13hd

Chinese brand (Huion): https://www.amazon.com/gp/product/B00LA0NONE?tag=artprdus-20&link_code=ur2&creative=9325&camp=211189

This other one: https://www.amazon.com/gp/product/B009QQ7BG0?tag=artprdus-20&link_code=ur2&creative=9325&camp=211189

As someone with a screen-less tablet looking to upgrade I'd definitely recommend looking into these - I'm sure your SO would love being able to draw directly on the screen.

And she can then later upgrade if she likes it to a cheaper cintiq or surface studio; maybe something like lenovo yoga book or iPad pro depending on her needs.

This screen protector on Amazon has the proper cutouts for the new iPad Pro: Screen Protector

Is the zagg invisible shield that rubbery material? Because I can't see how you would use the stylus on top of that. I ended up getting these glass screen protectors for my surface instead and it really does feel just like writing on the surface with nothing on it at all.

http://www.amazon.com/gp/aw/d/B00FZEWF86